 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 58 relay coupler
59 digital signal processing relay coupler the universal foot of the weidm?ller relay modules allow them to be assembled on ts 32, ts 35 x 7.5 and ts 35 x 15 mounting rails in accordance with european standards en 50 035 and en 50 022. an led status indicator in the coil of the relay coupler indicates the relay switching status. types of contact the standard range comprises numerous types and combinations of contacts. 1 nc (egr eg2, egr eg7, rs 30) 1 no (egr eg2, egr eg7, dkr, rs 30) 1 nc and 1 no (egr eg2, wrs) 2 no (wrs) 3 no (wrs) 1 changeover (egr eg2, egr/rst eg7, wrs dkr prs/prz mcz r, rs 30, rs 31) 2 changeover (egr eg2, wrs, rs 32, prs/prz) 4/8/16 changeover (rsm) contact material the all-round capability of weidm?ller relay modules is achieved by the choice of the contact material. the contact is responsible for both the reliable transmission of the control signals and for switching power contactors. weidm?ller uses gold-plated or gold- flashed agni contacts for most applica- tions. gold-plated contacts permit the switching of the low-power applica- tions up to 40 ? with a gold-plating thicker than 2 ?. for switching higher ratings we use agsno2 or agcdo con- tacts (rs 31). contact material properties application u/i fine silver - inexpensive universal use 1 v?50 v ag 99 % - average tendency to weld and average up to medium-size loads 1 ma? a resistance to burn-off - subject to corrosion in sulphurous atmosphere silver nickel - high mechanical stability universal use 12 v agni 0.15 - low tendency to weld at medium-size loads 5 ma?0 a - low contact resistance - high resistance to burn-off hard silver - mechanical stability > agni for use with medium-size 12 v agcu3 - tendency to weld < agni loads 10 ma?0 a - resistance to burn-off > agni - contact resistance > agni silver cadmium - very low tendency to weld suitable for switching 12 v oxide - resistance to burn-off > agcu3/ni inductive loads 100 ma agcdo silver-tin- - high thermal decomposition temperature suitable for swiching 12 v oxide - more arc-resistant with low material transfer inductive loads 100 ma agsno 2 tungsten - very high resistance to burn-off circuits with extremely 60 v w- high switching rate with short closed times high on/off loads 1 a hard gold - < lowest contact resistance dry circuits in ??0 v auni - best resistance to corrosion damp atmospheres ??.2 v = preferred materials 60 relay coupler switching of small and large power ratings for automation technology, weidm?ller offers the egr egr 7 relay coupler to switch ratings up to 40 ? under resistive loads. this allows signals to be reliably relayed to control devices. the switching of higher power ratings in power supply technology is achieved by the rs 31 relay coupler, which guarantees switching capacity up to 3.5 kva under resistive loads. switching times of the relay modules pick-up delay typ. < 10 ms drop-out delay typ. < 12 ms switching behaviour/load limit curve (dependimg on type) contact life with resistive load dc-limit with resistive load reduction factor with inductive load cos j < 1 switching no. eff. = switching no (at cos j = 1) x red. factor f relay couplers with plugged relays relay couplers with plugged relays are only conditionally suitable for use in appli- cations subject to heavy vibrations. relay couplers with soldered relays are to be preferred. derating curves the contact resistance is largely responsi- ble for heat development within the relay. this link is demonstrated by a derating curve as a function of the permissible cur- rent subject to the ambient temperature. we determine the current (curve a) for the following operating conditions: - continuous operation - rated input voltage + 10 % - several relay modules operating under load, mounted horizontally in a row without spacing on mounting rail a higher load is applicable when modules are mounted with a gap of 20 mm as shown in curve "b". in addition, the func- tion of curve "b" shows the max. values for a switching or short-time operation when assembled horizontally on the mounting rail. notes for usage the characteristic data of the actuation are to be meticulously observed when using uc variants in dc circuitry. uc vari- ants have a higher current input at the moment of switching due to their series circuitry. the internal current limiter of commercially available initiators can result in the operated relay coupler not being switched through. rc combination long supply cables are particularly open to electrical and electro-mechanical influ- ences. these can lead to disturbances of the function or even failure of the relay module. a remedy for this problem is an rc combination in series that filters out unwanted disturbances. rc combinations are available for all customary relay cou- plers: pluggable (plugseries) or as ter- minal block (wdu 12c and dku 12c). protective circuits of the contacts switching sparks may occur when switch- ing inductive or capacitive loads that affect the operational life of the relay. the following protective circuits offer the possibility of reducing contact wear: diode: advantage: can be used for all ratings, low overvoltage, minimum space require- ments, economic disadvantage: very long drop-out delay diode and z-diode: advantage: low overvoltage (determined by z- diode), low drop-out delay disadvantage: not usable for high power ratings rc combination: advantage: low overvoltage, low drop-out delay disadvantage: higher current loading on contacts at switch-on, complex and expensive for increased power rating varistor: advantage: low drop-out delay, economic disadvantage: not for all operating voltages and power ratings u s voltage curve 1 close 2 open u vdr last + (~) (~) vdr u s 12 t u rc last + (~) (~) r c u s 12 t u zd last + u s 12 t u d last + u s 12 t single contact number of operations switching capacity (kva) direct current (a) direct voltage (v) reduction factor f load load load load power factor 61 digital signal processing definition of technical data protective separation all equipment required to guarantee "pro- tective separation" must be constructed in such a way that, for example, a mechani- cal defect cannot reduce the level of insu- lation. in the case of a relay, this means that if a mechanical defect occurs (bent solder pin, break in winding conductor or broken spring), "protective separation" must be guaranteed. relays are specified and tested according to iec 255 and vde 0435. neither stan- dard contains any reference to en 50 178 (equipping power installations with electronic equipment) nor is "protec- tive separation" defined. to compound matters the test voltages quoted for the relays are based on different measurement conditions. the test voltages cannot be applied to en 50 178 or din vde 0106 part 101. as more and more users employ only equipment that guarantees "protec- tive separation", a lot of manufacturers of relays refer to din vde 0106 and test their products accordingly. consequently, the quoted values correspond to the require- ments for "protective separation". standards the following standards are fulfilled: en 50 178 equipping power installations with elec- tronic equipment din vde 0106 part 101 protection against flow of dangerous cur- rents through the human body; basic requirements for protective separation within electrical equipment. din vde 0109 insulation co-ordination within low-voltage system including clearance and creepage distances for assembled pcbs. din vde 0435 electrical relays, all-or-nothing relays input circuit input voltage [v] reference voltage at which the relay coupler operates. typical reference voltages: => 5 v dc, 12, 24, 48, 60, 115, 230 v ac/dc input current [ma] quotient resulting from input voltage and input resistance. input resistance => coil resistance + resistance of drive (r, led, rect. ? rated power consumption [w/va] input voltage x input current ac/dc with tolerance of +/- 10% or +5/-15% typical range for relay coupler: 250 mw > pv > 1 w 0.4 va > pv > 1.2 va pull-in voltage [v] smallest input voltage that relay coupler requires in order to respond (t amb = 293 k) pick-up current [ma] smallest input current required to switch relay from inoperative to operating position (t amb = 293 k) pull-in power [w/va] product of pull-in voltage and pick-up current drop-out voltage [v] voltage level at which relay has definitely released self reset current [ma] input current level at which relay has definitely released output circuit output voltage [v] max. voltage that can be applied to relay contact switching current [a] current that can flow for max. of 4 sec. after relay contact has closed continuous current [a] current that flows continuously after contact has closed switching power [w/va] product of output voltage and switching current with resistive, inductive and capacitive load min. switching power [mw] smallest amount of power that can be switched via contact service life number of switching operations before contact fails - mechanical => with no electric load - electrical => with resistive or inductive ac/dc load pick-up lag [ms] length of time from application of energizing voltage until contact closes/opens drop-out lag [ms] length of time from breaking the energizing circuit until contact closes/opens contact bounce time [ms] length of time between first and last closing/opening of contact when relay picks up or drops out switching frequency [hz] switching operations per sec. with a duty factor of 1 : 2 (t on = t off ) withstand voltage [kv] max. test voltage between input and output circuits which does not cause any discharge reliable separation feature of relay coupler that conform to vde 0160 and vde 0106 part 101 electric arc current flow between contact surfaces as they open, caused by ionization contact wear switching inductive loads leads to considerable changes in the composition of the materials used. the results are: => formation of pits or peaks on the surface of contacts => failure due to interlocking of contacts spark absorption limitation of transient overvoltages by connecting supplementary circuit across inductive loads => rc combinations => z-diodes/suppressor diodes => varistors reduction factor factor by which service life is reduced when switching inductive loads 62 t ypes of housings for relay coupler component housing eg weidm?ller coupling modules are enclosed in housings appropriate for industrial appli- cations. the housings are suitable for fit- ting onto mounting rails ts 32, ts 35 x 7.5 or ts 35 x 15 in accordance with european standards en 50 035 and en 50 022. weidm?ller component housings eg 1 and eg 2 are 18 mm wide. the fully enclosed eg housings are equipped with clamping yoke screw con- nections or push-on connections to con- nect conductors. conductors with the fol- lowing cross-sections can be connected: solid core: 0.5...4 mm 2 or flexible: 0.5...2.5 mm 2 . the component housing eg 7 has a spe- cial status. it has been specifically designed to accommodate 10-mm slim relays and optocouplers. eg 7 relay couplers can be optionally mounted onto ts 32 or ts 35 rails. the rst eg 7 locking socket is also avail- able for use with the pluggable relays cou- plers. the enclosed eg 7 housing are equipped with clamping yoke screw connections. the following conductor cross-sections can be connected: no/nc: 0.5...1.5 mm 2 changeover (rst): 0.5...2.5 mm 2 . component housing wavebox it is important to provide modern electron- ics components with housings suitable for the function. setting and operating func- tions must be guaranteed; technical requirements with respect to heat dissipa- tion and emc properties are to be sup- ported. an ideal design saves space and wiring costs in the switchgear cabinet. in addi- tion, ergonomics and design are becoming increasingly important for high-quality relay coupler interfaces. the wavebox fulfils these criteria and is further distinguished by the following: optimal width for any application (12.5 mm, 17.5 mm, 22.5 mm) large component assembly surface; smds mountable on solder side no tools required for assembly pluggable pcbs pluggable cross-connection via zqv 2.5 n hinged, transparent cover screw/plug and socket connector blz 5.08 optional tension clamp/plug and socket connector blfz 5.08 marking option with ws tags mount onto ts 35 connection systems blz screw/plug-in connectors and blzf tension clamp/plug-in systems for flexible conductors up to 2.5 mm 2 , to guarantee maximum wiring flexibility. removing printed circuit boards accomplished by depressing the locking clips at the side of the headpiece, and withdrawing the terminal level and pcb from the housing. this is not permitted when the supply is connected. cross-connection the zqv 2.5 n/2 cross-connector can connect housings of the same family at the base of the housing. the cross-con- nection can be loaded with a current of up to 8 a. this allows the supply voltage to be cross-connected from one electronics module to another. the voltage at the cross-connection must not exceed 50 v. ventilation vents ventilation vents, arranged at an angle, temper and ventilate the lower side of the housings. modular system plugseries/plug relay is a new generation of pluggable relay couplers. the core of this system is an innovative relay socket pxs or pxz . weidm?ller has combined the functionality and experience from its relay and terminal block business in this product. the plug relay is the ideal connection technology between the relay and the application. modular system principle the plugseries is particularly service friendly. commercially available relays are plugged; retainer and release clips ensure stability, led indicators with free-wheeling diodes can be easily plugged. relays can be easily plugged - suitable for small electric circuits standard design and bgd independent connection technology: screw or tension clamp rated cross-section 0.5...2.5 mm 2 robust design of retainer / release clip one or two changeover contacts max. current switched 16 a low wiring costs thanks to zqv 25n cross-connectors (pluggable) service-friendly modular system - relay socket, led indicators, retainer clips and relays - mount onto ts 35 - marking options with ws markers on retainer clips pluggable led indicator with free-wheeling diode 63 digital signal processing ty pes of housings for relay coupler weidm?ller rs locking socket locking sockets with relays rs 30, 31, 32 are either 11.2 mm or 25 mm wide depending on version. the open profile makes the use of pluggable relays possible. modules mounted onto the locking sock- ets are provided with clamping yoke screw connections or push-on connectors for wiring conductors. conductors with the following cross-sec- tions can be connected: solid core: 0.5...4 mm 2 flexible: 0.5...2.5 mm 2 . locking sockets with multiple interfaces rsm multiple interfaces can be optionally assembled with 4, 8 or 16 relays. to save wiring costs on the input side, variants are offered with joint positive and negative potentials. the pcb connectors are provided with clamping yoke screw connections for con- ductors with the following cross-sections: solid core: 0.5...4 mm 2 or flexible: 0.5...2.5 mm 2 . some versions of the rsm coupler have a male connector block available for connecting pre-assembled cables on the input side in accordance with iec 603-1/din 41 651. minicoupler dk all dkr mini coupler components fulfil demands for slimmest possible design. the sensational width of only 6 mm is achieved by using state-of-the-art surface mountable components smds. 4 and 5 screw-connections are offered for 0.5...4 mm 2 conductor cross-sections. the mini couplers offer a wide spectrum for cou- pling digital sensor/actuator signals between automation devices and the field process. dkr relay couplers can receive and standardise signals with varying volt- ages from the field. miniconditioner mcz the 6-mm mcz housing is one of the slimmest of its kind. it has the following distinguishing features: - z-spring reduces mounting costs - integrated cross-connection options in the input and outputs minimise wiring costs mczr miniconditioner (relay coupler) are available with 4 or 5 z-spring connections. the clampable conductor cross-section is 0.5...1.5 mm 2 . microseries the relay coupler and optocoupler variants from the microseries are used in applications in industrial automation to isolate and couple digital input and output signals. their compact design means that they are particularly suitable for use on sub-distribution boards as well as in switchgear cabinets where they help the user to make optimum use of valuable switching space. with its compact design, the microseries elegantly combines the functionality of the classic coupling level and the terminal level. 6.1-mm mounting width pluggable cross-connections of four potentials in the inputs and outputs proven cross-connection system zqv 4 n wide input voltage spectrum from 5 ... 230 v led-indicator reverse-connect protection free-wheeling diode housing material: wemid flammability class: v0 in accordance with ul 94 innovative retaining and release system marking surfaces for fitting standard ws 12/6 markers ce-marking weidm?ller relay couplers are marked with the ce symbol and comply with the requirements of en 50 081 part 1 and en 50 082 part 2. they can therefore be used for both industrial as well as for applica- tions in residential, commercial and light industry. appropriate esd measures should be taken during installation. if supply cables are particularly long, overvoltage protec- tion should be provided to prevent interfer- ence from electrical disturbance in the atmosphere. 24 v housing eg 0133660000 0133560000 0160260000 page 72 page 72 page 73 0536260000 0542660000 0123060000 page 72 page 72 page 73 waveseries 8275350000 8418240000 8418270000 8418330000 8418300000 wrs 8286280000 8418250000 8418280000 page 79 8418310000 8416210000 page 76 page 77 8418320000 8418220000 page 78 8418230000 page 74 eg 7* 8216520000 8216530000 8216570000 8147120000 8147140000 8216560000 8092340000 8092350000 8216580000 page 80 page 80 page 80 plugseries 8530621001 8530631001 prs / prz 8530691001 8530701001 8536530000 8536560000 8536650000 8536680000 page 82 page 82 rs 30 1101661001 1100961001 1181511001 1101611001 1100911001 1181521001 1101621001 1100921001 1100260000 1101761001 1101061001 1100210000 1101711001 1101011001 1100220000 1101721001 1101021001 1100360000 page 91 page 91 page 91 rs 31 1128361001 1128331001 1128311001 page 92 rs 32 9406121001 9406221001 page 94 rsm 1173461001 1113161001 1113261001 1113361001 1100061001 1100161001 1113461001 1113561001 1113761001 1112361001 1113661001 8018221001 1112761001 1107761001 1107861001 page 97 1112661001 1113861001 1173561001 1113061001 page 97 1173661001 page 97 dkr 32 8016620000 8008110000 page 70 dkr 35 8016610000 8181980000 8008170000 8181970000 page 70 page 71 8215620000 page 71 dkr 35/32 9454910000 page 71 mcz r 8365980000 8442960000 8390590000 page 68 microseries 8533640000 mrs / mrz 8533660000 8556050000 8556120000 page 87 * approval by germanischer lloyd 64 relay coupler output 2 x 2 x 4 x 8 x 16 x 3 x electromechanical switching reliable separation 24 v dc 24 vuc/ac 48 v housing eg 0662660000 0662460000 0160360000 page 72 page 72 0123260000 page 73 waveseries 8286280000 8418250000 8418280000 8418310000 wrs page 74 page 76 page 77 page 78 eg 7* 8092370000 8092380000 8216590000 page 81 page 81 page 81 rs 30 1101861001 1101161001 1100460000 1101811001 1101111001 1100410000 1101821001 1101121001 1100420000 1101961001 1101261001 1100560000 1101911001 1101211001 page 91 1101921001 1101221001 page 91 page 91 rs 31 1150761001 page 92 rs 32 9406321001 page 94 9406421001 1122661001 page 95 rsm 1 11 4061001 11 1 4161001 11 1 4361001 1 11 3961001 11 1 4261001 11 1 4461001 1 11 2461001 page 97 page 97 1 173 761001 page 97 microseries 8556040000 mrs / mrz 8556110000 page 87 115 v eg 0141360000 0160460000 page 73 waveseries 8418220000 8418260000 8418290000 wrs page 75 page 76 page 77 eg 7* 8092430000 8092440000 8216610000 page 81 page 81 page 81 plugseries 8536510000 8536520000 prs / prz 8536610000 8536630000 8530640000 8530660000 8530790000 8530720000 page 82 page 82 rs 30 1155161001 1155211001 1155111001 1155261001 1155121001 1155221001 1102161001 1101461001 1102111001 1101411001 1102121001 1101421001 page 91 page 91 rs 31 1150361001 1150461001 page 92 rs 32 1122761001 9406621001 page 95 rsm 1 11 4561001 11 1 4661001 11 1 4761001 page 97 page 97 page 97 mcz r 8420880000 8467470000 page 61 microseries 8556030000 mrs / mrz 8556100000 page 87 * approval by germanischer lloyd 65 digital signal processing relay coupler output reliable separation vdc vuc/ac electromechanical switching 2 x 2 x 4 x8 x 16 x 3 x 66 relay coupler output electromechanical switching 2 x 2 x 4 x 8 x 16 x 3 x reliable separation 230 vuc/ac 230 v housing eg 0543860000 0543660000 0142460000 page 72 page 72 page 73 waveseries 8418230000 8418260000 8418290000 8418340000 8418320000 wrs page 75 page 76 page 77 page 79 page 78 eg 7* 8092460000 8092470000 8216620000 8178200000 page 81 8216630000 page 81 page 81 plugseries 8530671001 8530681001 prs / prz 8530731001 8530741001 page 82 page 82 rs 30 1102261001 1101561001 1 100860000 1102211001 1101511001 page 91 1102221001 1101521001 page 91 page 91 rs 31 1 128461001 1 128431001 1 128411001 page 93 rs 32 9406721001 1122761001 page 95 rsm 11 1 4861001 1 11 4961001 11 1 5061001 11 2 3461001 11 08061001 11 08261001 page 97 page 97 page 97 mcz r 8237710000 page 69 microseries 8556020000 mrs / mrz 8556090000 page 87 240 v rs 30 1128561001 1128661001 1128511001 1128611001 1128521001 1128621001 page 91 page 91 * approval by germanischer lloyd 4?0 v housing waveseries 8275320000 wrs 2, 4?4 v page 74 waveseries 8418210000 wrs 60 v page 74 eg 7*, 60 v 8092400000 8092410000 8216600000 page 81 page 81 page 81 rs 30, 60 v 1102061001 1100660000 9406521001 1102011001 1100610000 page 94 1102021001 1100620000 page 91 page 91 dkr 32, 5 v 8019600000 page 70 dkr 35, 5 v 8019610000 page 70 mcz r, 60 v 8470380000 page 68 microseries 8556080000 mrs / mrz, 5 v 8556150000 page 86 microseries 8556060000 mrs / mrz, 60 v 8556130000 page 87 * approval by germanischer lloyd 67 digital signal processing 12 v housing eg 0160160000 page 73 waveseries 8418240000 8418270000 8418300000 wrs page 76 page 77 page 78 eg 7* 8092310000 8092320000 8216550000 page 80 page 80 page 80 plugseries 8536471001 8536501001 prs / prz 8536571001 8536591001 page 82 page 82 rs 30 1129421001 1129521001 1129660000 page 91 page 91 page 91 rs 32 9406021001 page 94 dkr 35 8171100000 page 70 microseries 8556070000 mrs / mrz 8556140000 page 86 relay coupler output electromechanical switching 2 x 2 x 4 x8 x 16 x 3 x output 2 x 2 x 4 x8 x 16 x 3 x reliable separation vdc vuc/ac 68 ordering data for ts 35 technical data input input voltage input current at u n max. input power making threshold cut-out threshold reaction time at u n (typ.) release at u n (typ.) capacity working resistance to reduction at dissipated energy functionality cross-connection on pin output switching voltage ac: continuous current/switching power (see derating diagram) min. switching current switch-on current dc: continuous current/switching power mechanical service life max. switching frequency at nominal load insulation coordination acc. to en 50178 rated voltage rated impulse voltage overvoltage category pollution severity clearances and creepage distances insulation coord.- and voltage proof, input/output mounting rail ambient temperature storage temperature conductor conductor cross-section approvals overall width accessories end plate further accessories, dimensions and connection data see type cat. no. mcz r 24 vdc 8365980000 24 vdc ?0 % (19.2...28.8 v) 6.3 ma ?0 % (5.7...6.9 ma) 156 mw ?0% 12 v...19 v 4 v...5.5 v 4.5 ms 10 ms no operating indication reverse polarity protect. diode free wheel diode 2, 3, 4 1 changeo. cont. (agsno 2 ) max. 300 vdc / 400 vac max. 6 a / max. 1500 va 100 ma (at u = 10 v) max. 6 a see limit diagram 20 x 10 6 switching operations 0.1 hz 300 v 4 kv iii 2 5.5 mm 4 kv eff / 1 min -25 ??50 ? -40 ?...+60 ? awg 22...12 1.5 mm 2 ce, ul, csa, gl 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 relay couplers in component housings this module can be used as a universal inter- face between the controller and actuator for switching medium-sized loads. reduces installation and commissioning times by use of the proven z-spring connec- tion technology pluggable cross-connections in input and output minimise wiring costs 6-mm width mcz r 24 vdc mcz r 24 vdc/au mcz r 60 vdc mcz r 24 vac/dc type cat. no. mcz r 24 vac/dc 8390590000 24 vac/dc ?0% (21.6...26.4 v) ac: 10.8 ma 15% (9.2 12.4 ma) dc: 6.1 ma ?5% (5.2...7.1 ma) ac: 160 mva ?0 % dc: 151 mw ?0 % ac: ca. 17 v / dc: ca. 19 v ac: ca. 7 v / dc: ca. 4 v 5 ms 30 ms no operating indication bridge rectifier 2, 3, 4 1 changeo. cont. (agsno 2 ) max. 300 vdc / 400 vac max. 6 a / max. 1500 va 100 ma (at u = 10 v) max. 6 a see limit diagram 20 x 10 6 switching operations 0.1 hz 300 v 4 kv iii 2 5.5 mm 4 kv eff / 1 min -25 ??50 ? -40 ?...+60 ? awg 22...12 1.5 mm 2 ce, ul, csa, gl 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 schematic circuit diagram 300 200 100 25 6 5 4 3 2 1 20 25 30 35 40 45 50 c u/vdc i l /a prohibited area 1 2 3 4 5 6 i l /adc derating curve rowed without clearances on the mounting rail rowed with 20 mm spacing on the mounting rail limit diagram type cat. no. mc zr24vdc/au 8442960000 24 vdc ?0 % (19.2...28.8 v) 6.3 ma ?0 % (5.7...6.9 ma) 156 mw ?0% 12 v...19 v 4 v...5.5 v 4.5 ms 10 ms no operating indication reverse polarity protect. diode free wheel diode 2, 3, 4 1 changeo. cont. (5 au) max. 300 vdc / 400 vac max. 6 a* / max. 1500 va 1 ) 0.1 ma max. 6 a* see limit diagram 20 x 10 6 switching operations 0.1 hz 300 v 4 kv iii 2 5.5 mm 4 kv eff / 1 min -25 ??50 ? -40 ?...+60 ? awg 22...12 1.5 mm 2 ce, ul, csa, gl 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 type cat. no. mcz r 60 vdc 8470380000 60 vdc ?0% (48...72 v) 3 ma ?0 % (12.4...3.6 ma) 180 mw ?5 % ca. 38 v ca. 14 v 4.5 ms 10 ms no operating indication reverse polarity protect. diode free wheel diode 2, 3, 4 1 changeo. cont. (agsno 2 ) max. 300 vdc / 400 vac max. 6 a / max. 1500 va 100 ma (at u = 10 v) max. 6 a see limit diagram 20 x 10 6 switching operations 0.1 hz 300 v 4 kv iii 2 5.5 mm 4 kv eff / 1 min -25 ??50 ? -40 ?...+60 ? awg 22...12 1.5 mm 2 ce, ul, csa 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 1 ) depends on load conditions * the hard-gold plating is resistant for parameters 36 vdc, 50 ma with 10 6 cycles miniconditioners mcz r 69 digital signal processing mcz r 110 vdc mcz r 120 vac mcz r 230 vac type cat. no. mcz r 230 vac 8237710000 230 vac ?0% 9.5 ma ?5 % (8...11ma) 2.1 va ?5 % ca. 115 v / 5 ma ca. 60 v / 2.5 ma 8 ms 30 ms no operating indication bridge rectifier 2.3, 4 1 changeo. cont. (agsno 2 ) max. 300 vdc / 400 vac max. 6 a / max. 1500 va 100 ma (at u = 10 v) max. 6 a see limit diagram 20 x 10 6 switching operations 0.1 hz 300 v 4 kv iii 2 5.5 mm 4 kv eff / 1 min -25 ??50 ? -40 ?...+60 ? awg 22...12 1.5 mm 2 ce, ul, csa 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 type cat. no. mcz r 120 vac 8420880000 120 vac -15 %/+10 % 7 ma ?5 % 0.85 va ?5 % ( 380 mw 15 %) ca. 70 v / 4 ma ca. 22 v / 1.3 ma 8 ms 30 ms yes operating indication bridge rectifier 2.3, 4 1 changeo. cont. (agsno 2 ) max. 300 vdc / 400 vac max. 6 ma / max. 1500 va 100 ma (at u = 10 v) max. 6 a see limit diagram 20 x 10 6 switching operations 0.1 hz 300 v 4 kv iii 2 5.5 mm 4 kv eff / 1 min -25 ??50 ? -40 ?...+60 ? awg 22...12 1.5 mm 2 ce, ul, csa 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 type cat. no. mcz r 110 vdc 8467470000 110 vdc ?0% 2.85 ma ?5% 340 mw ?5% ca. 68 v / 1.6 ma ca. 19 v / 0.4 ma 4.5 ms 10 ms no operating indication bridge rectifier 2, 3, 4 1 changeo. cont. (agsno 2 ) max. 300 vdc / 400 vac max. 6 a / max. 1500 va 100 ma (at u = 10 v) max. 6 a see limit diagram 20 x 10 6 switching operations 0.1 hz 300 v 4 kv iii 2 5.5 mm 4 kv eff / 1 min -25 ??50 ? -40 ?...+60 ? awg 22...12 1.5 mm 2 ce, ul, csa 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 300 200 100 25 6 5 4 3 2 1 20 25 30 35 40 45 50 c u/vdc i l /a prohibited area 1 2 3 4 5 6 i l /adc derating curve rowed without clearances on the mounting rail rowed with 20 mm spacing limit diagram relay couplers in component housings schematic circuit diagram 70 type cat. no. dkr 5 vdc 8019600000 dkr 5 vdc 8019610000 input: bottom 5 vdc ? % 12.5 ma 65 mw typ. 0.7?.5 ms typ. 0.2?.0 ms 500 ma 10 w/10 va 100 v 500 ma 200 hz rh/ru 1 normally-open contact 10 9 switching operations 5x10 8 switching operations 150 v 1.5 kv iii 2 3 mm -25 ??40 ? -25 ??50 ? -40 ??60 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dkr 24 vdc 8016620000 dkr 24 vdc 8008170000 input: bottom 24 vdc ?0 % 9.3 ma 225 mw typ. 0.7?.5 ms typ. 0.2?.0 ms 500 ma 10 w/10 va 100 v 500 ma 20 hz rh/ru 1 normally-open contact 10 9 switching operations 5x10 8 switching operations 150 v 1.5 kv iii 2 3 mm -25 ??40 ? -25 ??50 ? -40 ??60 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 relay couplers in component housings mini coupler dkr dkr 12 vdc dkr 24 vac/dc dkr 24 vdc type cat. no. dkr 12 vdc 8171100000 input: bottom 12 vdc ?0 % 12 ma 144 mw typ. 0.7?.5 ms typ. 0.2?.0 ms 500 ma 10 w/10 va 175 v 500 ma 25 hz rh/ru 1 normally-open contact 10 9 switching operations 5x10 8 switching operations 150 v 1.5 kv iii 2 3 mm -25 ??40 ? -25 ??50 ? -40 ??60 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dkr 24 vac/dc 8008110000 dkr 24 vac/dc 8016610000 input: bottom 24 vac/dc ?0 % 11.5 maac/9 madc 300 mva/220 mw 0.6?.5 ms ac/0.9?.3 ms dc 12.7?5 ms ac/14.4?6.4 ms dc 500 ma 10 w/10 va 170 v 500 ma 5 hz rh/ru 1 normally-open contact 10 9 switching operations 5x10 8 switching operations 150 v 1.5 kv iii 2 3 mm -25 ??40 ? -25 ??50 ? -40 ??60 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 dkr 5 vdc ordering data for ts 32 y for ts 35 w with combination foot ts 32/ts 35 technical data input voltage input current input current, limited = sps able input power pick-up lag turn off delay max. switch-on current max. switching capacity max. output voltage max. output current min. output current max. switching frequency contact material contacts service life mechanical at l l = 10 ma insulation coordination acc. to en 50178 rated voltage rated impulse voltage overvoltage category pollution severity clearances and creepage distances operating temperature without clearance with clearance storage temperature conductor conductor cross-section overall width accessories end plate further accessories, dimensions and connection data see these modules are used for protective separation of input signals and adjustment of sig- nal levels cost-effective solution for adjustment of power and potential low input power screw connection technology 6-mm width 71 digital signal processing relay couplers in component housings mini coupler dkr dkr 24 vac/dc dkr 24 vdc dkr 24 vac/dc dk5r-1u type cat. no. dkr 24 vdc 8181980000 input: bottom 24 vdc ?0 % 11.5 ma 384 mw 5 a 2 kva/192 w 250 vac/dc 8 a 100 ma 25 hz agcdo 1 changeover contact 10 7 switching operations 3x10 6 switching operations 300 v 6 kv iv 2 8 mm -25 ??40 ? -25 ??50 ? -40 ??60 ? awg 22?2 0.5? mm 2 18 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dkr 24 vac/dc 8181970000 input: bottom 24 vac/dc ?0 % 20 maac/16 madc max. 100 ma 480 mwac/400 mwdc 5 a 2 kva/192 w 250 vac/dc 8 a 100 ma ac: 5 hz dc: 25 hz agcdo 1 changeover contact 10 7 switching operations 3x10 6 switching operations 300 v 6 kv iv 2 8 mm -25 ??40 ? -25 ??50 ? -40 ??60 ? awg 22?2 0.5? mm 2 18 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dkr 24 vdc 8215620000 input: top 24 vdc ?0 % 9.3 ma 225 mw typ. 0.7?.5 ms typ. 0.2?.0 ms 500 ma 10 w/10 va 175 vac/dc 500 ma 25 hz rh/ru 1 normally-open contact 10 9 switching operations 5x10 8 switching operations 150 v 1.5 kv iii 2 3 mm -25 ??40 ? -25 ??50 ? -40 ??60 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dk5r-1u 9454910000 input: bottom 24 vac/dc ?0 % 9 maac/7 madc max. 240 ma 6 ms 15 ms ac/dc 4 a 1.5 kva/140 w 250 vac/dc 6 a 20 hz ag ni 1 changeover contact 2x10 7 switching operations 300 v 4 kv iii 2 8 mm -40 ?...+60 ? -40 ?...+60 ? -40 ?...+60 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dk5 8268870000 page 305 72 relay coupler in component housings eg 2 egr eg 2 24 v ac/dc voltage egr eg 2 24 v direct and alternating voltage egr eg 2 48 v egr eg 2 230 v ac voltage ordering data rated data input voltage rated consumption ?(w) rated consumption ~ (va) drop-out current of the relay** (at 20 ?) max. output voltage continuous current derating curve a = mounted horizontally on rail without clearance b = mounted horizontally on rail with clearance x 20 mm continuous current ambient temperature switch-on current max. switching capacity with resistor load min. switching capacity/switching current bounce times switching times, typical ? pick-up lag ? turn off delay max. switching frequency contact material service life, mechanical ? 24 v? 1 a, resistive load ? 230 v~, 3 a, resistive load status indicator storage temperature ambient temperature ? mounted on rail without clearance ? mounted on rail with clearance 20 mm approvals insulation coordination acc. to en 50178 overvoltage category pollution severity accessories, dimensions and connection data see ** larger values on request schematic circuit diagram type cat. no. nc 0133560000 1) no 0133660000 1) 24 v? ?0 % 0.36 w 1.5 ma 240 v~/100 v 3 a 5 a 600 va/120 w 40 ? < 2 ms < 5.3 ms < 8.3 ms 50 hz agni, gold-plated > 10 7 switching operations > 6 x 10 5 switching operations > 10 5 switching operations green led ?0 ??60 ? ?5 ??40 ? ?5 ??50 ? csa (013366) iii 3 page 306, fig. ii type cat. no. nc 0542660000 no 0536260000 24 v 0 , ?0 % 0.35 w 0.6 va 1.5 ma?4 ma~ 240 v~/100 v 3 a 5 a 600 va/120 w 40 ? < 2 ms < 8 ms < 22 ms 30 hz agni, gold-plated > 10 7 switching operations > 6 x 10 5 switching operations > 10 5 switching operations green led ?0 ??60 ? ?5 ??40 ? ?5 ??50 ? iii 3 page 306, fig. ii type cat. no. nc 0662460000 no 0662660000 48 v 0 , ?0 % 0.8 w 0.9 va 1.5 ma?3.5 ma~ 240 v~/100 v 1 a 5 a 600 va/120 w 40 ? < 2 ms < 9 ms < 12 ms 37 hz agni, gold-plated > 10 7 switching operations > 6 x 10 5 switching operations > 10 5 switching operations green led ?0 ??60 ? ?5 ??40 ? ?5 ??50 ? iii 2 page 306, fig. ii type cat. no. nc 0543660000 no 0543860000 230 v~, +5 % ?5 % 3.2 va 4 ma 240 v~/100 v 1 a 5 a 600 va/120 w 40 ? < 2 ms < 5 ms < 7 ms 40 hz agni, gold-plated > 10 7 switching operations > 6 x 10 5 switching operations > 10 5 switching operations green led ?0 ??60 ? ?5 ??40 ? ?5 ??50 ? iii 2 page 306, fig. ii 1 ) no output varistor with 1 no or 1 nc type cat. no. egr 2 rt (24 v 0 ) 0123060000 egr 2 rt (48 v 0 ) 0123260000 24 v 0 48 v 0 0.7 w 0.7 w 1 va 0.9 va 3.5 ma?8 ma~ 2 ma?3.5 ma~ 250 v 5 a 15 a/200 ms 1100 va/144 w 5 a 4 ms 23 ms 18 ms 25 ms 19 ms 19 hz 21 hz ag, gold-flashed 30 x 10 6 10 5 (1100 va, cos : = 1) red led ?0 ??85 ? ?5 ??40 ? iii 2 page 306, fig. iii 73 digital signal processing ordering data rated data input voltage rated consumption ?(w) rated consumption ~ (va) drop-out current of the relay** (at 20 ?) max. output voltage continuous current derating curve a = mounted horizontally on rail without clearance b = mounted horizontally on rail with clearance x 20 mm continuous current ambient temperature switch-on current max. switching capacity with resistor load min. braking capacity/switching current bounce times switching times, typical ? pick-up lag ? turn off delay max. switching frequency contact material service life, mechanical ? 24 v? 1 a, resistive load ? 230 v~, 3 a, resistive load status indicator storage temperature ambient temperature ? mounted on rail without clearance ? mounted on rail with clearance 20 mm insulation coordination acc. to en 50178 overvoltage category pollution severity accessories, dimensions and connection data see ** larger values on request schematic circuit diagram relay coupler in component housings eg 2 egr eg 2 dc voltage 2 changeover contacts type cat. no. egr 2 rt (12 v? 0160160000 egr 2 rt (24 v? 0160260000 12 v 24 v 0.61 w 0.54 w 12 ma 5.5 ma 250 v 5 a 15 a/200 ms 1100 va/144 w 5 a 4 ms 16 ms 22 ms 20 ms 15 ms 20 hz 20 hz ag, gold-flashed 30 x 10 6 10 5 (1100 va, cos : = 1) red led ?0 ??85 ? ?5 ??40 ? iii 2 page 306, fig. iii type cat. no. egr 2 rt (48 v? 0160360000 egr 2 rt (115 v? 0160460000 48 v 115 v 0.65 w 0.6 w 2.5 ma 1 ma 250 v 5 a 15 a/200 ms 1100 va/144 w 5 a 4 ms 18 ms 14 ms 16 ms 23 ms 27 hz 24 hz ag, gold-flashed 30 x 10 6 10 5 (1100 va, cos : = 1) red led ?0 ??85 ? ?5 ??40 ? iii 2 page 306, fig. iii led is parallel to coil in 12 v dc and 24 v dc versions type cat. no. egr 2 rt (115 v 0 ) 0141360000 egr 2 rt (230 v 0 ) 0142460000 115 v 0 230 v 0 0.6 w 1.2 w 0.6 va 1.2 va 1 ma?1 ma~ 1 ma 250 v 5 a 014246 15 a/200 ms 1100 va/144 w 5 a 4 ms 17 ms 13 ms 17 ms 18 ms 24 hz 22 hz ag, gold-flashed 30 x 10 6 10 5 (1100 va, cos : = 1) red led ?0 ??85 ? ?5 ??40 ? iii 2 page 306, fig. iii with 2.8-mm tab connection egr eg 2 ac/dc voltage 2 changeover contacts 74 wrs 1 24/60 vuc type cat. no. wrs 1 24/60 vuc 8418210000 wrz 1 8430200000 24 vuc?0% / 60 vuc?0% 11 maac?5% at ue=60 v 10 madc?5% at ue=60 v 10.2 maac?5% at ue=24 v 9 madc?5% at ue=24 v 0.7 va ?5% at ue=60 v 0.34 va?5% at ue=24 v 0.6 w ?5% at ue=60 v 0.22 w?5% at ue=24 v max. 150 vdc/250 vac max. 5 a/max. 1250 va * max. 10 a 100 ma/5 vdc ag-alloy max. 30 m ? /max. 100 m ? at 1 a / 6 vdc typ. 5.4 ms (no) / 4.2 ms (nc) typ. 4.4 ms (no) / 5.4 ms (nc) 20 x 10 6 switching operations 150 x 10 3 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 5.5 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 type cat. no. wrs 1 2.4-24 vdc 8275320000 wrz 1 8430170000 2.4?4 vdc +10 % 4.6 madc ?5% at ue 12 v 6 mw ?5% at ue 2.4 v max. 150 vdc /250 vac max. 5 a /max. 1250 va * max. 10 a 100 ma/5 vdc ag-alloy max. 30 m ? /max. 100 m ? at 1 a/6 vdc typ. 7 ms (no) / 4.5 ms (nc) typ. 6.3 ms (no) / 5.5 ms (nc) 20 x 10 6 switching operations 150 x 10 3 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 5.5 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 wa veseries relay coupler in component housings wrs 1 2.4-24 vdc wrs 1 24 vdc wrs 1 24/48 vuc schematic circuit diagram ordering data screw connection tension clamp connection input input voltage input current input power output switching voltage continuous current ac / switching power ac switch-on current min. switching contact material contact resistance (when new) pick-up delay at nominal voltage turn off delay mechanical service life electrical service life max. switching frequency at nominal voltage ambient temperature storage temperature approvals insulation coordination acc. to en 50178 rated voltage rated impulse voltage overvoltage category pollution severity implemented clearance and creepage path insulation and voltage strength insulation and voltage strength of entire circuit to mounting rail testing input/output high voltage test accessories, dimensions and connection data see * at ambient temperature 20? type cat. no. wrs 1 24 vdc 8275350000 wrz 1 8430180000 24 vdc?0 % 9 madc?5% 220 mw?5% max. 150 vdc /250 vac max. 5 a /max. 1250 va * max. 10 a 100 ma/5 vdc ag-alloy max. 30 m ? /max. 100 m ? at 1 a/6 vdc typ. 7 ms (no) / 4.5 ms (nc) typ. 6.3 ms (no) / 5.5 ms (nc) 20 x 10 6 switching operations 150 x 10 3 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 5.5 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 type cat. no. wrs 1 24/48 vuc 8286280000 wrz 1 8430190000 24 vuc?0 % /48 vuc?0% 14 mauc?5% at ue 24 v 14 mauc?5% at ue 48v 0.5 va (w)?5% at ue=48v 0.35 va (w)?5% at ue=24v max. 150 vdc /250 vac max. 5a /max. 1250 va * max. 10 a 100 ma/5vdc ag-alloy max. 30 m ? /max. 100 m ? at 1 a/6 vdc typ. 7 ms (no) / 4.5 ms (nc) typ. 6.3 ms (no) / 5.5 ms (nc) 20 x 10 6 switching operations 1.5 x 10 5 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 5.5 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 with 1 changeover contact relay couplers in the wavebox independent connection technology - pluggable connection unit screw or tension clamp technology fast commissioning and after-sales- service service - pluggable pcbs save wiring tasks - cross-connections possible at input and output 75 digital signal processing wrs 1 24/115 vuc wrs 1 24 vuc 230 vac type cat. no. wrs 1 24/115 vuc 8418220000 wrz 1 8430210000 24 vuc?0% / 115 vuc?0% 11 maac?5% at ue=115 v 10.5madc?5% at ue=115 v 10.2 maac?5% at ue=24 v 9 madc?5% at ue=24 v 1.3 va ?5% at ue=115 v 0.34 va?5% at ue=24 v 1.2 w ?5% at ue=115 v 0.22 w?5% at ue=24 v max. 150 vdc/250 vac max. 5 a/max. 1250 va * max. 10 a 100 ma/5 vdc ag-alloy max. 30 m ? /max. 100 m ? at 1 a / 6 vdc typ. 5.4 ms (no) / 4.2 ms (nc) typ. 4.4 ms (no) / 5.4 ms (nc) 20 x 10 6 switching operations 150 x 10 3 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 5.5 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 type cat. no. wrs 1 24 vuc/230 vac 8418230000 wrz 1 8430220000 24 vuc?0% / 230 vac?0% 15 maac?5% at ue=230 v 14 maac?5% at ue=24 v 13 madc?5% at ue=24 v 3.5 va ?5% at ue=230 v 0.34 va?5% at ue=24 v 0.32 w?5% at ue=24 v max. 150 vdc/250 vac max. 5 a/max. 1250 va * max. 10 a 100 ma/5 vdc ag-alloy max. 30 m ? /max. 100 m ? at 1 a / 6 vdc typ. 5.4 ms (no) / 4.2 ms (nc) typ. 4.4 ms (no) / 5.4 ms (nc) 20 x 10 6 switching operations 150 x 10 3 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 5.5 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 wa veseries relay coupler in component housings waagerecht montiert ansteuerung 26,4vdc 0 1 2 3 4 5 6 7 8 020406 080 100 umgebungstemperatur [ c] a bstand>=10mm waagerecht montiert ansteuerung 52,8vdc 0 1 2 3 4 5 6 7 8 0204 06080100 umgebungstemperatur [ c] a bstand>=10mm waagerecht montiert ansteuerung 66vdc 0 1 2 3 4 5 6 7 8 0204 06080100 umgebungstemperatur [ c] a bstand>=10mm waagerecht montiert ansteuerung 26,4v ac / dc 0 1 2 3 4 5 6 7 8 020406 080 100 umgebungstemperatur [ c] a bstand>=10mm waagerecht montiert ansteuerung 253vac 0 1 2 3 4 5 6 7 8 0204 06080100 umgebungstemperatur [ c] a bstand>=10mm wrs 1 24/60 vuc ?8418210000 wrs 1 24/115 vuc ?8418220000 wrs 1 24 vuc/230 vac ?8418230000 wrs 1 2.4-24 vdc ?8275320000 wrs 1 24/48 vuc ?8286280000 mounted horizontally control 26.4vdc mounted clearance >= 10 mm ambient temperature [?] output current [a] mounted horizontally control 52.8vdc mounted clearance >= 10 mm ambient temperature [?] output current [a] mounted horizontally control 66vdc mounted clearance >= 10 mm ambient temperature [?] output current [a] mounted horizontally control 26.4v ac/dc mounted clearance >= 10 mm ambient temperature [?] output current [a] mounted horizontally control 253vac mounted clearance >= 10 mm ambient temperature [?] output current [a] 76 wa veseries relay coupler in component housings wrs 2 12/24 vdc wrs 2 24/48 vuc ordering data screw connection tension clamp connection input input voltage input current input power output switching voltage continuous current ac / switching power ac switch-on current min. switching contact material contact resistance (when new) pick-up delay at nominal voltage turn off delay mechanical service life electrical service life max. switching frequency at nominal voltage ambient temperature storage temperature approvals insulation coordination acc. to en 50178 rated voltage rated impulse voltage overvoltage category pollution severity implemented clearance and creepage path insulation and voltage strength insulation and voltage strength of entire circuit to mounting rail testing input/output high voltage test accessories, dimensions and connection data see * at ambient temperature 20? schematic circuit diagram type cat. no. wrs 2 12/24 vdc 8418240000 wrz 2 8430230000 12 vdc?0 % / 24 vdc?0 % 21 madc?5% at ue=24 v 20 madc?5%bei ue=12 v 0.5 w?5% at ue=24 v 0.24 w?5% at ue=12 v max. 250 vdc / 250 vac (ul ? 13300/12300) max. 5 a / max. 1250 va * max. 8 a 100 ma / 5 vdc agsno 2 max. 30 m ? /max. 100 m ? at 1 a/6 vdc typ. 5 ms typ. 6.3 ms (no) / 5.5 ms (nc) 50 x 10 6 switching operations 1 x 10 5 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 8 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 type cat. no. wrs 2 24/48 vuc 8418250000 wrz 2 8430240000 24 vuc?0 % / 48 vuc?0 % 10 maac?5% at ue=48 v 11.5 maac?5% at ue=24 v 8.5 madc?5% at ue=48 v 7.2 madc?5% at ue=24 v 0.48 va?5% at ue=48 v 0.21 va?5% at ue=24 v 0.4 w?5% at ue=48 v 0.17 w?5% at ue=24 v max. 250 vdc / 250 vac (ul ? 13300/12300) max. 5 a / max. 1250 va * max. 8 a 100 ma / 5 vdc agsno 2 max. 30 m ? /max. 100 m ? at 1 a/6 vdc typ. 5 ms --- 50 x 10 6 switching operations 1 x 10 5 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 8 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 type cat. no. wrs 2 115 vuc/230 vac 8418260000 wrz 2 8430250000 115 vuc?0%/ 230 vac?0 % 11 maac?5% at ue=230 v 8.5 mauc?5% at ue=115 v 8 madc?5% at ue=115 v 2.5 va?5% at ue=230 v 1 va?5% at ue=115 v 0.9 w?5% at ue=115 v max. 250 vdc / 250 vac (ul ? 13300/12300) max. 5 a / max. 1250 va * max. 8 a 100 ma / 5 vdc agsno 2 max. 30 m ? /max. 100 m ? at 1 a/6 vdc --- --- 50 x 10 6 switching operations 1 x 10 5 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa (nur 115 vuc) 300 v 4 kv (1.2/50 ? iii 2 8 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 wrs 2 115 vuc/ 230 vac with 2 no contacts wrs 2 12/24 vdc -> 8418240000 waagerecht montiert ansteuerung 26,4vdc 0 1 2 3 4 5 6 7 8 020406 080 100 umgebungstemperatur [ c] a bstand>=10mm angereiht wrs 2 24/48 vuc -> 8418250000 waagerecht montiert ansteuerung 52,8vdc 0 1 2 3 4 5 6 7 8 020406 080 100 umgebungstemperatur [ c] a bstand>=10mm angereiht wrs 2 115 vuc/ 230 vac -> 8418260000 waagerecht montiert; ansteuerung 253vac 0 1 2 3 4 5 6 7 8 0102 0304050607080 umgebungstemperatur [ c] a bstand>=10mm wrs 2 115 vuc/ 230 vac ?8418260000 wrs 2 12/24 vdc ?8418240000 wrs 2 24/48 vuc ?8418250000 output current [a] mounted horizontally control 26.4 vdc 26.4 vdc ambient temperature [?] output current [a] mounted horizontally control 26.4 vdc 52.8 vdc ambient temperature [?] output current [a] mounted horizontally control 26.4 vdc 253 vdc ambient temperature [?] mounted mounted mounted clearance 10 mm clearance 10 mm clearance 10 mm 77 digital signal processing wrs 2 12/24 vdc wrs 2 24/48 vuc wrs 2 115 vuc/ 230 vac ordering data screw connection tension clamp connection input input voltage input current input power output switching voltage continuous current ac / switching power ac switch-on current min. switching contact material contact resistance (when new) pick-up delay at nominal voltage turn off delay mechanical service life electrical service life max. switching frequency at nominal voltage ambient temperature storage temperature approvals insulation coordination acc. to en 50178 rated voltage rated impulse voltage overvoltage category pollution severity implemented clearance and creepage path insulation and voltage strength insulation and voltage strength of entire circuit to mounting rail testing input/output high voltage test accessories, dimensions and connection data see * at ambient temperature 20? schematic circuit diagram type cat. no. wrs 2 12/24 vdc 8418270000 wrz 2 8430260000 12 vdc?0% / 24 vdc?0% 19.7 madc?5% at ue=12 v 20.5 madc?5% at ue=24 v 0.5 w?5% at ue=24 v 0.24 w?5% at ue=12 v max. 250 vdc/250 vac max. 5 a/max. 1250 va * max. 8 a 100 ma/5 v agsno 2 max. 30 m ? /max. 100 m ? at 1 a/6 vdc typ. 5ms --- 50 x 10 6 switching operations 1 x 10 5 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 8 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 type cat. no. wrs 2 24/48 vuc 8418280000 wrz 2 8430270000 24 vuc?0 % / 48 vuc?0 % 10 maac?5% at ue=48 v 11.5 maac?5% at ue=24 v 8.5 madc?5% at ue=48 v 7.2 madc?5%bei ue=24 v 0.48 va?5% at ue=48 v 0.21 va?5% at ue=24 v 0.4 w?5% at ue=48 v 0.17 w?5% at ue=24 v max. 250 vdc/250 vac max. 5 a/max. 1250 va * max. 8 a 100 ma/5 v agsno 2 max. 30 m ? /max. 100 m ? at 1 a/6 vdc --- --- 50 x 10 6 switching operations 1 x 10 5 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 8 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 type cat. no. wrs 2 115 vuc/230 vac 8418290000 wrz 2 8430280000 115 vuc?0 %/230 vac?0 % 11 maac?5% at ue=230 v 10 mauc?5% at ue=115 v 8 madc?5% at ue=115 v 2.5 va?5% at ue=230 v 1 va?5% at ue=115 v 0.9 w?5% at ue=115 v max. 250 vdc/250 vac max. 5 a/max. 1250 va * max. 8 a 100 ma/5 v agsno 2 max. 30 m ? /max. 100 m ? at 1 a/6 vdc --- --- 50 x 10 6 switching operations 1 x 10 5 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa (nur 115 vuc) 300 v 4 kv (1.2/50 ? iii 2 8 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 wa veseries relay coupler in component housings 0 1 2 3 4 5 6 7 8 020406 080 100 a bstand>=10mm angereiht with 1nc / 1 no wrs 2 24/48 vuc -> 8418280000 waagerecht montiert ansteuerung 52,8vac 0 1 2 3 4 5 6 7 8 9 0204 0608 0 100 umgebungstemperatur [ c] a bstand>=10mm angereiht wrs 2 115 vuc/230 vac -> 8418290000 waagerecht montiert; ansteuerung 253vac 0 1 2 3 4 5 6 7 8 0204 0608 0 100 umgebungstemperatur [ c] a bstand>=10mm wrs 2 115 vuc/230 vac ?8418290000 wrs 2 12/24 vdc ?8418270000 wrs 2 24/48 vuc ?8418280000 ambient temperature [?] output current [a] mounted horizontally control 26.4 vdc 26.4 vdc ambient temperature [?] output current [a] mounted horizontally control 26.4 vdc 52.8 vdc ambient temperature [?] output current [a] mounted horizontally control 26.4 vdc 253 vdc ambient temperature [?] mounted mounted mounted clearance 10 mm clearance 10 mm clearance 10 mm 78 wa veseries relay coupler in component housings wrs 2 12/24 vdc wrs 2 24/48 vuc wrs 2 24 vuc/ 230 vac ordering data screw connection tension clamp connection input input voltage input current input power output switching voltage continuous current ac / switching power ac switch-on current min. switching contact material contact resistance (when new) pick-up delay at nominal voltage turn off delay mechanical service life electrical service life max. switching frequency at nominal voltage ambient temperature storage temperature approvals insulation coordination acc. to en 50178 rated voltage rated impulse voltage overvoltage category pollution severity implemented clearance and creepage path insulation and voltage strength insulation and voltage strength of entire circuit to mounting rail testing input/output high voltage test accessories, dimensions and connection data see * at ambient temperature 20? schematic circuit diagram type cat. no. wrs 2 12/24 vdc 8418300000 wrz 2 8430290000 12 vdc?0% /24 vdc?0 % 21 madc?5% at ue=12 v 22 madc?5% at ue=24 v 0.26 w?5% at ue=12 v 0.53 w?5% at ue=24 v max. 150 vdc /250 vac max. 5 a/max. 1250 va * max. 10 a 100 ma/5 vdc ag-alloy max. 30 m ? / max. 100 m ? at 1 a / 6 vdc typ. 6.5 ms (no) / 4.5 ms (nc) typ. 8 ms (no) / 11 ms (nc) 20 x 10 6 switching operations 1.5 x 10 5 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 5.5 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 type cat. no. wrs 2 24/48 vuc 8418310000 wrz 2 8430300000 24 vuc?0% /48 vuc?0 % 14 mauc?5% at ue=48 v 14 mauc?5% at ue=24 v 0.7 va(w)?5% at ue=48 v 0.35 va(w)?5% at ue=24 v max. 150 vdc /250 vac max. 5 a/max. 1250 va * max. 10 a 100 ma/5 vdc ag-alloy max. 30 m ? / max. 100 m ? at 1 a / 6 vdc typ. 6.5 ms (no) / 4.5 ms (nc) typ. 8 ms (no)/ 11 ms (nc) 20 x 10 6 switching operations 1.5 x 10 5 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 5.5 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 type cat. no. wrs 2 24 vuc/230 vac 8418320000 wrz 2 8430310000 24 vuc?0% /230 vac?0% 15 maac?5% at ue=230 v 14 mauc?5% at ue=24 v 0.35 w?5% at ue=24 v 3.45 va ?5% at ue=230 v max. 150 vdc /250 vac max. 5 a/max. 1250 va * max. 10 a 100 ma / 5 vdc ag-alloy max. 30 m ? / max. 100 m ? at 1 a / 6 vdc typ. 6 ms (no)/4.2 ms (nc)/eingang: 24 vuc/230 vac typ. 4.4 ms (no)/ 5.4 ms (nc) 20 x 10 6 switching operations 150 x 10 3 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? 300 v 4 kv (1.2/50 ? iii 2 5.5 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 with 2 changeover contacts wrs 2 12/24 vdc 8418300000 waagerecht montiert ansteuerung 26,4vdc 0 1 2 3 4 5 6 7 020406 080 100 umgebungstemperatur [ c] a bstand>=10mm angereiht wrs 2 24/48 vuc 8418310000 waagerecht montiert ansteuerung 26,4vac 0 1 2 3 4 5 6 7 8 020406 080 100 umgebungstemperatur [ c] a bstand>=10mm angereiht wrs 2 24 vuc/ 230 vac 8418320000 waagerecht montiert ansteuerung 253vac 0 1 2 3 4 5 6 7 8 010203 04050607080 umgebungstemperatur [ c] a bstand>=10mm wrs 2 24 vuc/ 230 vac ?8418320000 wrs 2 12/24 vdc ?8418300000 wrs 2 24/48 vuc ?8418310000 output current [a] mounted horizontally control 26.4 vdc 26.4 vdc ambient temperature [?] output current [a] mounted horizontally control 26.4 vdc 26.4 vdc ambient temperature [?] output current [a] mounted horizontally control 26.4 vdc 253 vdc ambient temperature [?] mounted mounted mounted clearance 10 mm clearance 10 mm 79 digital signal processing wa veseries relay coupler in component housings wrs 2 24 vuc wrs 2 230 vac ordering data screw connection tension clamp connection input input voltage input current input power output switching voltage continuous current ac / switching power ac switch-on current min. switching contact material contact resistance (when new) pick-up delay at nominal voltage turn off delay mechanical service life electrical service life max. switching frequency at nominal voltage ambient temperature storage temperature approvals insulation coordination acc. to en 50178 rated voltage rated impulse voltage overvoltage category pollution severity implemented clearance and creepage path insulation and voltage strength insulation and voltage strength of entire circuit to mounting rail testing input/output high voltage test accessories, dimensions and connection data see * at ambient temperature 20? schematic circuit diagram type cat. no. wrs 2 24 vuc 8418330000 wrz 2 8430320000 3fach 24 vac ?0 % 10.5 maac ?5 % at u nenn (per channel) 0.3 va ?5 % (per channel) 0.25 w ?5 % max. 250 vdc /250 vac max. 4 a/max. 1500 va * max. 6 a 12 v/10 ma agsno 2 max. 100 m ? at 1 a/24 vdc typ. 5 ms typ. 21 ms 20 x 10 6 switching operations 1 x 10 5 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? ul/csa 300 v 4 kv (1.2/50 ? iii 2 5.5 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 type cat. no. wrs 2 230 vac 8418340000 wrz 2 8430330000 3 x 230 vac ?0 % 10.3 maac ?5 % at u nenn (per channel) 2.4 va ?5 % (per channel) max. 250 vdc / 250 vac max. 4 a/max. 1500 va * max. 6 a 12 v/10 ma agsno 2 max. 100 m ? at 1 a/24 vdc typ. 8 ms typ.11 ms 20 x 10 6 switching operations 1 x 10 5 switching operations 0.1 hz -25 ?...+50 ? -40 ?...+60 ? 300 v 4 kv (1.2/50 ? iii 2 5.5 mm 4 kv eff 1 min 4 kveff 1 s page 298 + 308 with 3 no contacts wrs 2 24 vuc 8418330000 waagerecht montiert; ansteurung 26,4vdc 0 1 2 3 4 5 6 7 0204 0608 0 100 umgebungstemperatur [ c] a bstand>=10mm angereiht wrs 2 230 vac -> 8418340000 waagerecht montiert; ansteuerung 253vac 0 1 2 3 4 5 6 7 0204 0608 0 100 c] a bstand>=10mm angereiht wrs 2 24 vuc ?8418330000 wrs 2 230 vac ?8418340000 output current [a] mounted horizontally control 26.4 vdc 26.4 vdc ambient temperature [?] output current [a] mounted horizontally control 26.4 vdc 253 vdc ambient temperature [?] mounted mounted clearance 10 mm clearance 10 mm 80 relay couplers in components housings eg 7 egr eg 7 rst eg 7 rs eg 7 egr eg 7 rst eg 7 rs eg 7 12 v 0 24 v 24 v 24 v 0 type cat. no. egr eg7 8092310000 egr eg7 8092320000 egr eg7 8092330000 1) rst eg7 8216550000 rs eg7 8193830000 12 v 0 +15 % ?0 % 320 mw +20 % ?0 % 120 ma 3 ma screw connection 0.5?.5 mm 2 awg-conductor 26?6 0.5?.5 mm 2 250 v 5 a 8 a 100 mw/10 ma 1 ms agni 0.15 gold-flashed 1 ms 8 ms 6 ms > 15 x 10 6 switching operations 2 x 10 6 switching operations with free wheel diode > 2 x 10 5 switching operations green led ?0 ??60 ? ?5 ??60 ? din vde 0106 8 kv 8 mm iii 2 qb 16/10.16 1650330000 page 304 type cat. no. egr eg7 8216520000 egr eg7 8216530000 egr eg7 8218200000 1) rst eg7 8216570000 rs eg7 8193830000 24 v?+15 % ?0 % 280 mw +20 % ?0 % 12 ma 3 ma screw connection 0.5?.5 mm 2 awg-conductor 26?6 0.5?.5 mm 2 250 v 5 a 8 a 100 mw/10 ma 1 ms agni 0.15 gold-flashed 1 ms 8 ms 6 ms > 15 x 10 6 switching operations 2 x 10 6 switching operations with free wheel diode > 2 x 10 5 switching operations green led ?0 ??60 ? ?5 ??60 ? din vde 0106 8 kv 8 mm iii 2 qb 16/10.16 1650330000 page 304 type cat. no. egr eg7 8147120000 egr eg7 8147140000 egr eg7 8160030000 1) rst eg7 8216560000 rs eg7 8193830000 24 v?+15 % ?0 % 280 mw +20 % ?0 % 12 ma 3 ma screw connection 0.5?.5 mm 2 awg-conductor 26?6 0.5?.5 mm 2 250 v 5 a 8 a 40 ? 2) 1 ms agni 0.15 5 au 1 ms 8 ms 6 ms > 15 x 10 6 switching operations 2 x 10 6 switching operations with free wheel diode > 2 x 10 5 switching operations green led ?0 ??60 ? ?5 ??60 ? din vde 0106 8 kv 8 mm iii 2 qb 16/10.16 1650330000 page 304 type cat. no. egr eg7 8092340000 egr eg7 8092350000 egr eg7 8092360000 1) rst eg7 8216580000 rs eg7 8193830000 24 v 0 +15 % ?0 % 280 mw +20 % ?0 % 240 ma 3 ma screw connection 0.5?.5 mm 2 awg-conductor 26?6 0.5?.5 mm 2 250 v 5 a 8 a 100 mw/10 ma 1 ms agni 0.15 gold-flashed 2.4 ms 11 ms 10 ms > 15 x 10 6 switching operations 2 x 10 6 switching operations with free wheel diode > 2 x 10 5 switching operations green led ?0 ??60 ? ?5 ??60 ? din vde 0106 8 kv 8 mm iii 2 qb 16/10.16 1650330000 page 304 2 ) the following ratings can safely be switched: a) 100 mv?0 v ac/dc/100 ??00 ma after switching higher powers (b?) lower powers (a) can no longer be switched. b) 5 v? 24 v dc/10 ma ? 1.2 a c) 24 v ... 60 v dc/10 ma ... 500 ma d) 10 v?50 v ac/10 ma ? 5 a schematic circuit diagram derating curve a = mounted horizontally on rail without clearance b = mounted horizontally on rail, rowed with clearances continuous current ambient temperature ordering data combination foot for ts 15, ts 32, ts 35 1 no 1 nc egr eg 7 spare relays, without connection unit plug-in relay-coupl., without engagem. socket, 1 changeo. cont. engage.socket f. plug-in relay coupler w. combin.foot ts 32, 35 rated data of the coil input voltage rated consumption max. switch-on current combination foot for drop current connection ?no and nc ?changeover contacts rated data der contacts max. output voltage continuous current max. switch-on current min. switching capacity/switching current bounce times contact material 2) bounce times switching times pick up delay drop-out delay service life, mechanical ? 24 v? 1.1 a, inductive load ? 230 v~, 5 a, resistive load status indicator storage temperature ambient temperature insulation coordination acc. to en 50178 safe isolation according to vde 0106 part 101 rated impulse voltage clearances and creepage distances overvoltage category pollution severity accessories cross-connection comb. 16fold accessories, dimensions and connection data see 1) serves only as a spare part for no and nc plugs on to locking socket rs eg 7 with combination foot ts 32, 35 overall width: 10 mm with combination foot for ts 15, ts 32 or ts 35 versions with 12 v, 24 v and 48 v fulfil protective separation in accordance with vde 0160, part 101 all egr eg 7 and rst eg 7 are approved by germanischer lloyd. approval no. 35962 hh 81 digital signal processing relay couplers in components housings eg 7 48 v 0 60 v~ 115 v 0 230 v~ 230 v~ type cat. no. egr eg7 8092370000 egr eg7 8092380000 egr eg7 8092390000 1) rst eg7 8216590000 rs eg7 8193830000 48 v 0 +15 % ?0 % 280 mw +15 % ?0 % 480 ma 3 ma screw connection 0.5?.5 mm 2 awg-conductor 26?6 0.5?.5 mm 2 250 v 5 a 8 a 100 mw/10 ma 1 ms agni 0.15 gold-flashed 2.5 ms 12 ms 10 ms > 15 x 10 6 switching operations 2 x 10 6 switching operations with free wheel diode > 2 x 10 5 switching operations green led ?0 ??60 ? ?5 ??60 ? din vde 0106 8 kv 8 mm iii 2 qb 16/10.16 1650330000 page 304 type cat. no. egr eg7 8092400000 egr eg7 8092410000 egr eg7 8092420000 1) rst eg7 8216600000 rs eg7 8193830000 60 v 0 +15 % ?0 % 280 mw +15 % ?0 % 600 ma 3 ma screw connection 0.5?.5 mm 2 awg-conductor 26?6 0.5?.5 mm 2 250 v 5 a 8 a 100 mw/10 ma 1 ms agni 0.15 gold-flashed 3.8 ms 12 ms 10 ms > 15 x 10 6 switching operations 2 x 10 6 switching operations with free wheel diode > 2 x 10 5 switching operations green led ?0 ??60 ? ?5 ??60 ? 8 kv 8 mm iii 2 qb 16/10.16 1650330000 page 304 type cat. no. egr eg7 8092430000 egr eg7 8092440000 egr eg7 8092450000 1) rst eg7 8216610000 rs eg7 8193830000 115 v 0 +15 % ?0 % 330 mw +15 % ?0 % 160 ma 3 ma screw connection 0.5?.5 mm 2 awg-conductor 26?6 0.5?.5 mm 2 250 v 5 a 8 a 100 mw/10 ma 1 ms agni 0.15 gold-flashed 3.8 ms 12 ms 10 ms > 15 x 10 6 switching operations 2 x 10 6 switching operations with free wheel diode > 2 x 10 5 switching operations green led ?0 ??60 ? ?5 ??60 ? 8 kv 8 mm iii 2 qb 16/10.16 1650330000 page 304 type cat. no. egr eg7 8092460000 egr eg7 8092470000 egr eg7 8092480000 1) rst eg7 8216620000 rs eg7 8193830000 230 v~ +15 % ?0 % 280 mw +15 % ?0 % 185 ma 3 ma screw connection 0.5?.5 mm 2 awg-conductor 26?6 0.5?.5 mm 2 250 v 5 a 8 a 100 mw/10 ma 1 ms agni 0.15 gold-flashed 2 ms 12 ms 10 ms > 15 x 10 6 switching operations 2 x 10 6 switching operations with free wheel diode > 2 x 10 5 switching operations green led ?0 ??60 ? ?5 ??60 ? 8 kv 8 mm iii 2 qb 16/10.16 1650330000 page 304 type cat. no. egr eg7 8178200000 rst eg7 8216630000 rs eg7 8193830000 230 v~ +15 % ?0 % 280 mw +15 % ?0 % 185 ma 3 ma screw connection 0.5?.5 mm 2 awg-conductor 26?6 0.5?.5 mm 2 250 v 5 a 8 a 40 ? 2) 1 ms agni 0.15 5 au 2 ms 12 ms 10 ms > 15 x 10 6 switching operations 2 x 10 6 switching operations with free wheel diode > 2 x 10 5 switching operations green led ?0 ??60 ? ?5 ??60 ? 8 kv 8 mm iii 2 qb 16/10.16 1650330000 page 304 egr eg 7 rst eg 7 rs eg 7 82 plugseries relays on sockets modular system comprising: - relay socket for mounting rails - led indicator unit / rc combination - retainer clip - pluggable relays independent connection technology: screw or tension clamp technology compatible with low power relays type rt / standard with 1 or 2 co contacts coil and root-contacts cross-con- nectable with cross-connection type zqv 2.5 n available as complete module or as spare parts prs/prz xxx 1co prs/prz xxx 2co dc-version ac-version prz/prs prz/prs type/version screw connection prs 12vdc ld 1co prs 12vdc ld 2co prs 24vdc ld 1co prs 24vdc ld 2co prs 115vdc ld 1co prs 115vdc ld 2co prs 24vdc ld 2co sgr 282 with gold-plated relay contacts: prs 24vdc ld 2co au tension clamp connection prz 12vdc ld 1co prz 12vdc ld 2co prz 24vdc ld 1co prz 24vdc ld 2co prz 115vdc ld 1co prz 115vdc ld 2co prz 24vdc ld 2co sgr 282 with gold-plated relay contacts: prz 24vdc ld 2co au other variants on request technical data input voltage rated consumption, typ status indicator output contact version max. output voltage max. switching current continuous current rated braking capacity service life, mech. input/output clearance and creepage path protective separation dielectric strength insulation coordinates acc. to en 50178 miscellaneous data ambient temperature protection class rated cross-section flammability relay type dimensions wxhxt approvals rail mounted accessories cross-connection 2-pole black 2-pole red 2-pole blue marking tags type/version screw connection prs 24vac ld 1co prs 24vac ld 2co prs 120vac ld 1co prs 120vac ld 2co prs 230vac ld 1co prs 230vac ld 2co with gold-plated relay contacts: prs 120vac ld 2co au prs 230vac ld 2co au tension clamp connection prz 24vac ld 1co prz 24vac ld 2co prz 120vac ld 1co prz 120vac ld 2co prz 230vac ld 1co prz 230vac ld 2co with gold-plated relay contacts: prz 120vac ld 2co au prz 230vac ld 2co au other variants on request technical data input voltage rated consumption, typ status indicator output contact version max. output voltage max. switching current continuous current rated braking capacity service life, mech. input/output clearance and creepage path protective separation dielectric strength insulation coordinates acc. to en 50178 miscellaneous data ambient temperature protection class rated cross-section 0.5 mm 2 flammability relay type dimensions wxhxt approvals rail mounted accessories cross-connection 2-pole black 2-pole red 2-pole blue marking tags cat. no. qty. 8536471001 10 8536501001 10 8530621001 10 8530631001 10 8536510000 10 8536520000 10 8596000000 10 8561760000 10 8536571001 10 8536591001 10 8530691001 10 8530701001 10 8536610000 10 8536630000 10 8595970000 10 8552440000 10 12 v dc ... 24vdc ... 115vdc 400 mw pluggable led-housing, green led 1 co /2 co contacts 1 x um / 2 x um 250vuc 16a / 2 x 8a 10a 4kva / 2 x 2kva 30 x 10 6 > 8mm din vde 0106 t. 101 > 4kv eff iii / 2 -40? ... +50? ip 20 0.5...2.5mm 2 v0 schrack rt1 / rt2 15.2 x 91 x 85 ce, ul recognized, cul ts 35 zqv 2.5n/4-2 sw 1784270000 60 zqv 2.5n/4-2 rt 1784280000 60 zqv 2.5n/4-2 bl 1784290000 60 ws 10/5 1060860000 ws 15/5 1609880000 cat. no. qty. 8536530000 10 8536560000 10 8530641001 10 8530661001 10 8530671001 10 8530681001 10 8595960000 10 8595990000 10 8536651001 10 8536681001 10 8530710000 10 8530720000 10 8530731001 10 8530741001 10 8575940000 10 8575950000 10 24vac ...120vac ... 230vac 760 va pluggable led-housing, green led 1 co /2 co contacts 1 x um / 2 x um 250vuc 16a / 2 x 8a 10a 4kva / 2 x 2kva 5 x 10 6 > 8mm din vde 0106 t. 101 > 4kv eff iii / 2 -40? ... +50? ip 20 0.5...2.5mm 2 v0 schrack rt1 / rt2 15.2 x 91 x 85 ce, ul recognized, cul ts 35 zqv 2.5n/4-2 sw 1784270000 60 zqv 2.5n/4-2 rt 1784280000 60 zqv 2.5n/4-2 bl 1784290000 60 ws 10/5 1060860000 ws 15/5 1609880000 digital signal processing 83 plugseries relays on sockets accessories 92 87 15,3 87 (pxz35) 95 (pxs35) cross-connections channel a1 / a2 cross-connection channel 11 / 21 marking field retaining-clip 92 15.3 a2 a2 a1 (coil) a1 (coil) 24 24 14 (no) 14 (no) 21 21 11 (com) 11 (com) 22 22 12 (nc) 12 (nc) 15.3 empty base for rail mounted ts 35 screw connection tension clamp connection technical data rated current rated voltage dielectric strength coil/contacts protection class rated cross-section insulation stripping length - screw connection - tension clamp connection ambient temperature flammability class ul 94 holding clamp operating indication led indicator with free-wheeling diode 6 ... 24 vdc 6 ... 24 vdc 48 ... 60 vdc 115 vdc 12 ... 24 vac 115 vac 230 vac 230 vac rc combination 120...230 vac/dc pluggable cross-connectionen 2-pole black 2-pole red 2-pole blue marking tags 10 x 5 mm type cat. no. qty. pxs35 8533771001 10 pxz35 8536691001 10 16 a 250 v > 4 kv ip 20 2.5 mm 2 8 mm 10 mm -40? ... +60? v0 type cat. no. qty. prc 8536700000 100 pled 24 vdc 8536710000 20 pled 24 vdc red 8611010000 20 pled 48 vdc 8536720000 20 pled 115 vdc 8536730000 20 pled 24 vac 8536750000 20 pled 120 vac 8536760000 20 pled 230 vac 8536780000 20 pled 230 vac red 8611000000 20 plrc 200 nf/200 ? 8566530000 20 zqv 2.5n/4-2sw 1784270000 60 zqv 2.5n/4-2rt 1784280000 60 zqv 2.5n/4-2bl 1784290000 60 type cat. no. qty. ws 10/5 1060860000 200 ws 15/5 1609880000 96 dc-version ac-version tension clamp screw connection a2 a 1 14 21 24 12 11 22 a2 a 1 14 21 24 12 11 22 operating indication * free wheel diode * 84 plugseries relays on sockets type schrack rt cat. no. qty. rt 314012 4058470000 20 rt 424012 4058560000 20 rt 314024 4058480000 20 rt 315024 4058490000 20 rt 424024 4058570000 20 rt 425024 4058580000 20 rt 314048 4058740000 20 rt 424048 4058750000 20 rt 424060 4058760000 20 rt 314110 4058500000 20 rt 424110 4058590000 20 rt 315524 4058510000 20 rt 424524 4058600000 20 rt 314615 4058520000 20 rt 315625 4058530000 20 rt 424615 4058610000 20 rt 425615 4058620000 20 rt 314730 4058540000 20 rt 315730 4058550000 20 rt 424730 4058630000 20 rt 425730 4058640000 20 1 changeover contact or 2 changeover contacts agni 90/10, agni 0.15 htv 16 a 1we/2 x 8 a 2we 250 v ac 4 kva 10 ma /100 mw 40 ? 400 mw dc/0.55 va ac 5 kv typ. 7/3 ms 9/45 ms typ. 1/3 ms > 30 x 10 6 switching operations > 30 x 10 6 switching operations 1.25a, l/r = 80 ms 2.3 x 10 5 1.25a, l/r = 80 ms 2.8 x 10 5 1.2a, cosl/r = 0.3 6050x ip 40 v0 -40? ... +85? -40? ... +70? 14 g ul, csa, vde, ?ve schrack rt pluggable relay types print figure/circuit diagram relay type rt/sgr pluggable relay 12 vdc 1 changeover contact 12 vdc 2 changeover contacts 24 vdc 1 changeover contact 24 vdc 1 changeover contact au 24 vdc 2 changeover contacts 24 vdc 2 changeover contacts au 48 vdc 1 changeover contact 48 vdc 2 changeover contacts 60 vdc 2 changeover contacts 110 vdc 1 changeover contact 110 vdc 2 changeover contacts 24 vac 1 changeover contact 24 vac 2 changeover contacts 115 vac 1 changeover contact 115 vac 1 changeover contact au 115 vac 2 changeover contacts 115 vac 2 changeover contacts au 230 vac 1 changeover contact 230 vac 1 changeover contact au 230 vac 2 changeover contacts 230 vac 2 changeover contacts au technical data contact number and type contact material switching current switching voltage braking capacity min. switching current / braking capacity min. braking capacity au contact rated consumption dielectric strength sp./kont. response / drop out time: dc coil ac coil bounce time no contact/normally closed contact mechanical service life: dc coil ac coil braking capacity 1-pole dc 13 2-pole dc 13 2-pole ac 15 miscellaneous data protection class flammability class ul ambient temperature dc coil ac coil weight approvals 1 changeover contact 2 changeover contacts digital signal processing 85 plugseries relays on sockets type elesta sgr cat. no. qty. sgr 662 24 vdc t 8550510000 10 sgr 282 24 vdc t 8550520000 10 2 changeover contacts with test button agcuni 16 a 1we/2 x 8 a 2we 250 vac 4 kva 10 ma /100 mw 500 mw 5 kv typ. 10/3 ms typ. 0.5/5 ms > 30 x 10 6 switching operations ip 40 v1 -25? ... +70? 20 g sev, ul, csa, demko, vde, ptb pluggable relay 24 vdc 1 changeover contact with test button 24 vdc 2 changeover contacts with test button 24 vdc 1 normally-open contact technical data contact number and type contact material switching current peak inrush current switching voltage braking capacity min. switching current / braking capacity rated consumption dielectric strength sp./kont. response / drop out time: dc coil bounce time no contact/normally closed contact mechanical service life: dc coil miscellaneous data protection class flammability class ul ambient temperature dc coil weight approvals elesta sgr relais with manual operation type schrack rp 3sl cat. no. qty. rp3sl 24 vdc 1no 8588510000 20 1 normally-open contact agsno 2 25 a 120 a / 20 ms 250 v 4 kva 500 mw 4 kv typ. 8/2 ms typ. 2 ms 30 x 10 6 switching operations ip 40 -40? ... +70? 18 g sev, ul, csa, vde contact service life type load switch. oper. regulation rp3sl 12 a, 250 v~, cos ? =1 3x10 5 rp3sl tv 8 25x10 3 ul 508 rp3sl 2500 w, 230 v~, halogene lamps >10 4 rp3sl 1000 w, 250 v~, glow lamps 2.3x10 5 rp3sl 3000 w, 250 v~, glow lamps 3.6x10 4 rp3sl 1500 va, flurescent tubes 163 ? 10 4 rp 3sl relays for high switching currents leistungsrelais type rt2 2 changeover contacts power relay rp 3sl electrical life operations 86 ordering data for ts 35 screw connection tension clamp connection technical data input input voltage input voltage ac with u nenn input voltage dc with u nenn input power making threshold , (typ.) cut-out threshold (typ.) status indicator reaction time at u n (typ.) release at u n (typ.) voltage of relay coil functionality operating indication reverse polarity protection free wheel diode output switching voltage ac: continuous current/switching power (see derating diagram) switch-on current dc: continuous current/switching power min. braking capacity contact material mechanical service life max. switching frequency at nominal voltage ambient temperature storage temperature climate approvals insulation coordination acc. to en 50178 rated voltage rated impulse voltage overvoltage category pollution severity insulation coord.- and voltage proof, input/output mounting rail achieved clearances and creepage distances type cat. no. mrs 5 vdc 1co 8556080000 mrz 5 vdc 1co 8556150000 5 vdc 20 % (4...6 v) 38 .5 madc ?0 % 193 mw ?0% 3.2 v / 21.6 ma 1.6 v / 8 ma green led 6.2 ms 3.9 ms 5 v yes yes yes 1 changeover contact 250 vac acc. to vde 240 vac acc. to ul/csa max. 6 a / max. 1500 va max. 6 a see limit diagram 12 v /10 ma agsno 20 x 10 6 switching operations 0.1 hz -25 ??50 ? -40 ??60 ? 40 ? / 93 % rel. humidity, no condensation ce, cul 300 v 4 kv (1.2 / 50 ?) iii 2 4 kv eff / 1 min 5.5 mm this module can be used as a universal interface between the controller and actuator for switching small to medium-sized loads. pluggable cross-connection in the input and output reduces wiring costs 6-mm width flexible thanks to screw and tension clamp connection versions mrs 5 vdc 1co mrz 5 vdc 1co mrs 12 vdc 1co mrz 12 vdc 1co schematic circuit diagram type cat. no. mrs 12 vdc 1co 8556070000 mrz 12 vdc 1co 8556140000 12 vdc ?0 % (9.6...14.4 v) 17.2 madc ?0 % 210 mw ?0% 6.4 v / 8.4 ma 2.5 v / 2.4 ma green led 5.8 ms 6.9ms 12 v yes yes yes 1 changeover contact 250 vac acc. to vde 240 vac acc. to ul/csa max. 6 a / max. 1500 va max. 6 a see limit diagram 12 v /10 ma agsno 20 x 10 6 switching operations 0.1 hz -25 ??50 ? -40 ??60 ? 40 ? / 93 % rel. humidity, no condensation ce, cul 300 v 4 kv iii 2 4 kv eff / 1 min 5.5 mm micro relay mrs/mrz current temperature-rise curve limit diagram output current [a] ambient temperature [?] relay couplers on sockets microseries in terminal format digital signal processing 87 mrs 48 vuc 1co mrz 48 vuc 1co mrs 60 vdc 1co mrz 60 vdc 1co mrs 120 vuc 1co mrz 120 vuc 1co mrs 230 vac 1co mrz 230 vac 1co type cat. no. mrs 120 vuc 1co 8556030000 mrz 120 vuc 1co 8556100000 120 vuc +10% / -15% (102...132 v) 3.5 maac ?5 % 0.42 va ?5 % 71 v / 1.8 ma 22 v / 0.5 ma green led 6.7 ms 8.1 ms 60 v yes yes yes 1 changeover contact 250 v ~ acc. to vde 240 v ~ acc. to ul/csa max. 6 a / max. 1500 va max. 6 a see limit diagram 12 v /10 ma agsno 20 x 10 6 switching operations 0.1 hz -25 ??50 ? -40 ??60 ? 40 ? / 93 % rel. humidity, no condensation ce, cul 300 v 4 kv iii 2 4 kv eff / 1 min 5.5 mm type cat. no. mrs 230 vac1co 8556020000 mrz 230vac1co 8556090000 230 vac ?0% (207...253 v) 7.6 ma ?5% 1.55 va ?5 % 103 v / 5 ma 49 v / 2.5 ma green led 13 ms 11 ms 24 v yes 1 changeover contact 250 v ~ acc. to vde 240 v ~ acc. to ul/csa max. 6 a / max. 1500 va max. 6 a see limit diagram 12 v /10 ma agsno 20 x 10 6 switching operations 0.1 hz -25 ??50 ? -40 ??60 ? 40 ? / 93 % rel. humidity, no condensation ce, cul 300 v 4 kv iii 2 4 kv eff / 1 min 5.5 mm type cat. no. mrs 60 vdc1co 8556060000 mrz 60 vdc1co 8556130000 60 vdc ?0% (48...72 v) 3.3 madc ?0 % 200 mw ?0 % 35 v / 1.6 ma 11 v / 0.6 ma green led 5.9 ms 6.5 ms 60 v yes yes yes 1 changeover contact 250 vac acc. to vde 240 vac acc. to ul/csa max. 6 a / max. 1500 va max. 6 a see limit diagram 12 v /10 ma agsno 20 x 10 6 switching operations 0.1 hz -25 ??50 ? -40 ??60 ? 40 ? / 93 % rel. humidity, no condensation ce, cul 300 v 4 kv iii 2 4 kv eff / 1 min 5.5 mm type cat. no. mrs 48 vuc1co 8556040000 mrz 48 vuc1co 8556110000 48 vuc ?0% (43.2...52.8 v) 5 ma ?0 % 4 ma ?0 % 190 mw ?0 % 29 v / 2.2 ma 11 v / 1.3 ma green led 6.1 ms 5.8 ms 48 v yes yes yes 1 changeover contact 250 vac acc. to vde 240 vac acc. to ul/csa max. 6 a / max. 1500 va max. 6 a see limit diagram 12 v /10 ma agsno 20 x 10 6 switching operations 0.1 hz -25 ??50 ? -40 ??60 ? 40 ? / 93 % rel. humidity, no condensation ce, cul 300 v 4 kv iii 2 4 kv eff / 1 min 5.5 mm mrs 24 vuc 1co mrz 24 vuc 1co mrs 24 vdc 1co mrz 24 vdc 1co type cat. no. mrs 24 vdc 1co 8533640000 mrz 24 vdc 1co 8533660000 24 vdc 20 % (19.2...28.8 v) 6.6 madc ?0 % 160 mw ?0% 15.4 v / 4 ma 6.5 v / 1.2 ma green led 6.6 ms 5.8 ms 24 v yes yes yes 1 changeover contact 250 vac acc. to vde 240 vac acc. to ul/csa max. 6 a / max. 1500 va max. 6 a see limit diagram 12 v /10 ma agsno 20 x 10 6 switching operations 0.1 hz -25 ??50 ? -40 ??60 ? 40 ? / 93 % rel. humidity, no condensation ce, cul 300 v 4 kv iii 2 4 kv eff / 1 min 5.5 mm type cat. no. mrs 24 vuc 1co 8556050000 mrz 24 vuc 1co 8556120000 24 vuc ?0% (21.6...26.4 v) 11 ma 10 % 6.4 ma ?0 % 154 mw ?0 % 15.8 v / 3.6 ma 7 v / 1.3 ma green led 7.3 ms 9 ms 24 v yes yes yes 1 changeover contact 250 v ~ acc. to vde 240 v ~ acc. to ul/csa max. 6 a / max. 1500 va max. 6 a see limit diagram 12 v /10 ma agsno 20 x 10 6 switching operations 0.1 hz -25 ??50 ? -40 ??60 ? 40 ? / 93 % rel. humidity, no condensation ce, cul 300 v 4 kv iii 2 4 kv eff / 1 min 5.5 mm relay couplers on sockets microseries in terminal format relay couplers on sockets microseries in terminal format 88 tension clamp version mrz screw version mrs accessories general technical data clampable conductor: solid h07v-u mm 2 fsolid h07v-k mm 2 ? with ferrules acc. to din 46 228/1* mm 2 ? with ferrules with plastic collar* mm 2 max. clampable range in mm 2 /gauge pin acc. to iec 60 947-1 size rated torque continuous current of cross-connection 2-pole a continuous current of cross-connection multipole a insulation stripping length mm protection class housing material flammability class ul 94 rated current rated voltage cross-connection pluggable cross-connection zqv yellow red blue black markings 12 x 6 mm screwdriver tension clamp version 0.5?.5 0.5?.5 0.5?.5 0.5?.5 0.13?.5 a 2 - 10 10 10 ip 20 wemid v0 6 a 250 v type cat. no. qty. zqv 4n / 2 ge 1758250000 60 zqv 4n / 3 ge 1762630000 60 zqv 4n / 4 ge 1762620000 60 zqv 4n / 10 ge 1758260000 20 zqv 4n / 41 ge 1758270000 10 zqv 4n / 2 rt 1793950000 60 zqv 4n / 3 rt 1793980000 60 zqv 4n / 4 rt 1794010000 60 zqv 4n / 10 rt 1794040000 20 zqv 4n / 41 rt 1794070000 10 zqv 4n / 2 bl 1793960000 60 zqv 4n / 3 bl 1793990000 60 zqv 4n / 4 bl 1794020000 60 zqv 4n / 10 bl 1794050000 20 zqv 4n / 41 bl 1794080000 10 zqv 4n / 2 sw 1793970000 60 zqv 4n / 3 sw 1794000000 60 zqv 4n / 4 sw 1794030000 60 zqv 4n / 10 sw 1794060000 20 zqv 4n / 41 sw 1794090000 10 type cat. no. qty. ws 10/6 1060960000 200 ws 12/6 1061160000 200 type cat. no. qty. sd 0.6 x 3.5 x 100 9008330000 10 screw version 0.5? 0.5?.5 0.5?.5 0.5?.5 0.13? a 3 0.6 nm 10 10 7 ip 20 wemid v0 6 a 250 v type cat. no. qty. zqv 4n / 2 ge 1758250000 60 zqv 4n / 3 ge 1762630000 60 zqv 4n / 4 ge 1762620000 60 zqv 4n / 10 ge 1758260000 20 zqv 4n / 41 ge 1758270000 10 zqv 4n / 2 rt 1793950000 60 zqv 4n / 3 rt 1793980000 60 zqv 4n / 4 rt 1794010000 60 zqv 4n / 10 rt 1794040000 20 zqv 4n / 41 rt 1794070000 10 zqv 4n / 2 bl 1793960000 60 zqv 4n / 3 bl 1793990000 60 zqv 4n / 4 bl 1794020000 60 zqv 4n / 10 bl 1794050000 20 zqv 4n / 41 bl 1794080000 10 zqv 4n / 2 sw 1793970000 60 zqv 4n / 3 sw 1794000000 60 zqv 4n / 4 sw 1794030000 60 zqv 4n / 10 sw 1794060000 20 zqv 4n / 41 sw 1794090000 10 type cat. no. qty. ws 10/6 1060960000 200 ws 12/6 1061160000 200 type cat. no. qty. sd 0.6 x 3.5 x 100 9008330000 10 91 mm 92 mm 93 mm 94 mm 6.1 mm 6.1 mm relay couplers on sockets microseries in terminal format digital signal processing 89 type nais ape... cat. no. qty. ?30005v 4061580000 20 ?30012v 4061610000 20 ?30024v 4060120000 20 ?30048v 4061620000 20 ?30060v 4061630000 20 ?30124v 4061590000 20 ?30160v 4061600000 20 1 changeover contact single contact 6 a 300 vdc / 400 vac 1500 va agsno 2 100 ma, 12 v 1 ms 5 ms v-0 -40 ... +85 ? 6/1200 switching operations per minute 5 / 2.5 ms 1.5 / 5 ms ip 67 www.matsushita.de pluggable relay coil voltage 5 v, 1 changeover contact coil voltage 12 v, 1 changeover contact coil voltage 24 v, 1 changeover contact coil voltage 48 v, 1 changeover contact coil voltage 60 v, 1 changeover contact coil voltage 24 v, 1 changeover contact, 5 ?u coil voltage 60 v, 1 changeover contact, 5 ?u technical data (of relay manufacturer) contact number and type contact version switching current switching voltage / max. switching voltage braking capacity contact material recommended min. load typ. bounce time no contact typ. bounce time normally closed contact miscellaneous data flammability class ul ambient temperature max. switching operations with rated load / without load response / drop out time bounce time no contact / normally closed contact protection class housing for further data see also contact service life material agsno 2 switch. operations switch. operations accessories acc. to 90 relay couplers on sockets rs 30 rated data input voltage 5?0 v 10%; 115 v/230 v + 5% ?15% rated consumption ?(w) rated consumption ~ (va) drop-out current of the relay (at 20 ?) drop-out current of the relay (at 20 ?) pick-up current max. output voltage continuous current derating curve a = mounted horizontally on rail without clearance b = mounted horizontally on rail with clearance x 20 mm continuous current ambient temperature switch-on current switching capacity with resistive load min. switching capacity/switching current bounce times switching times, typical ? pick-up lag ? turn off delay max. switching frequency contact material service life, mechanical ? 24 v? 1 a, resistive load ? 230 v~, 3 a, resistive load storage temperature ambient temperature ? mounted on rail without clearance ? mounted on rail with clearance 20 mm insulation coordination acc. to en 50178 overvoltage category pollution severity dimensions mounting width length (perpendicular to mounting rail) height ts 32/ts 35 x 7.5 schematic circuit diagram 1 234 5 vttl 12 v 24 v 24 v 0 48 v 48 v 0 60 v 115 v~ 115 v 230 v~ 2 ) 240 v~ 0.45 w 1 ) 0.45 w 0.45 w 0.45 w 0.45 w 0.45 w 0.45 w 0.82 w 0.7 va 0.6 va 0.8 va 0.8 va 1.2 va ? ma 3 ma 2.5 ma 2 ma 2.5 ma 1 ma 2 ma 0.5 ma 3.5 ma~ 4.5 ma~ 1 ma~ 1 ma~ 1 ma~ 12 ma 10 ma 6 ma 4.3 ma 250 v 250 v 250 v 250 v 250 v 250 v 250 v 250 v 250 v 250 v 250 v 5 a 6 a6 a6 a6 a5 a 5 a 5 a 5 a3 a3 a 8 a 2000 va/100 w 250 mw/10 ma 3 ms 8 ms 8 ms 8 ms 8 ms 12 ms 13 ms 12 ms 9 ms 12 ms 10 ms 10 ms 7 ms 7 ms 7 ms 16 ms 11 ms 12 ms 11 ms 8 ms 11 ms 9 ms 9 ms 70 hz 70 hz 70 hz 30 hz 70 hz 20 hz 70 hz 30 hz 70 hz 30 hz 30 hz agni, gold-flashed >10 7 switching operations > 5 x 10 5 switching operations >7 x 10 5 switching operations ?0 ??60 ? ?5 ??40 ? ?5 ??50 ? iii 2 11.2 mm no/nc, 25 mm changeover contacts 70 mm (74 mm bl/sl version) 56 mm/51.5 mm continuous current continuous operation clearance > 20 mm on/off switch. mode < 1 min (50/50 %) 48 v~/230 v~/240 v~ 1 ) rated consumption with 24 vdc auxilary voltage. 2 ) 230 v?on request 1 nc, 1 no or 1 changeover contact digital signal processing 91 rs 30 disconnect plug with screw connection 1 changeover contact rs 30 ttl disconnect plug with screw connection 1 no and 1 nc 5678 input voltage 5 v? ttl 12 v 24 v 24 v b 48 v 48 v b 60 v 115 v 115 v~ 230 v~ 240 v~ ordering data connection method schematic circuit diagram contact function indicator none none red led none green led red led none green led red led none green led red led none green led red led none green led red led none green led red led none green led red led none green led red led none green led red led screw connection (lp) disconnect plug with screw connection (bl/sl) 12345 6788 no no nc nc changeo. c. changeo. c. changeo. c. no nc 1167760000 1167660000 1129660000 1129421001 1129521001 1101661001 1100961001 1100260000 1101611001 1100911001 1181511001 1100210000 1101621001 1100921001 1181521001 1100220000 1101761001 1101061001 1100360000 1101711001 1101011001 1101721001 1101021001 1101861001 1101161001 1100460000 1101811001 1101111001 1100410000 1101821001 1101121001 1100420000 1101961001 1101261001 1100560000 1101911001 1101211001 1101921001 1101221001 1102061001 1100660000 1102011001 1100610000 1102021001 1100620000 1155161001 1155261001 1155111001 1155211001 1155121001 1155221001 1102161001 1101461001 1100760000 1102111001 1101411001 1102121001 1101421001 1102261001 1101561001 1100860000 1102211001 1101511001 1102221001 1101521001 1128561001 1128661001 1128511001 1128611001 1128521001 1128621001 rs 30 screw connection 1 no 1 nc rs 30 screw connection 1 changeover contact relay couplers on sockets rs 30 92 relay couplers on sockets rs 30 rs 31 with power contacts ordering data rated data input voltage rated consumption ?(w) rated consumption ?(va) drop-out current of the relay (at 20 ?) drop-out current of the relay (at 20 ?) max. output voltage continuous current derating curve mounted horizontally on rail without clearance continuous current ambient temperature switch-on current max. switching capacity with resistor load min. switching capacity/switching current bounce times switching times, typical ? pick-up lag ? turn off delay max. switching frequency contact material service life, mechanical ?230 v, 50 hz, 3.5 kv a status indicator red led yellow led green led storage temperature ambient temperature insulation coordination acc. to en 50178 overvoltage category pollution severity dimensions mounting width length (perdendicular to mounting rail) height with ts 32/ts 35 x 7.5 schematic circuit diagram type cat. no. rs 31, 24 v 1128361001 rs 31, 24 v 1128331001 rs 31, 24 v 1128311001 24 v? ?0 % 1 w 11.5 ma 250 v 16 a 60 a/200 ms 3.5 kva/480 w 1 w/100 ma < 3 ms < 9 ms < 10 ms agcdo 3 x 10 7 switching operations 2.5 x 10 5 switching operations 1128361001 1128331001 1128311001 ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 58 mm/53.5 mm type cat. no. rs 31, 48 v 1150761001 48 v? ?0 % 1 w 13.5 ma 250 v 16 a 60 a/200 ms 3.5 kva/480 w 1 w/100 ma < 6 ms < 12 ms < 8 ms agcdo 3 x 10 7 switching operations 2.5 x 10 5 switching operations 1150761001 ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 58 mm/53.5 mm type cat. no. rs 31, 115 v 1150361001 115 v? +5 % ?5 % 1 w 5.5 ma 250 v 16 a 60 a/200 ms 3.5 kva/480 w 1 w/100 ma < 6 ms < 10 ms < 12 ms agcdo 3 x 10 7 switching operations 2.5 x 10 5 switching operations 1150361001 ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 58 mm/53.5 mm type cat. no. rs 31, 115 v~ 1150461001 115 v~, +5 % ?5 % 1 va 1.5 ma~ 250 v 16 a 60 a/200 ms 3.5 kva/480 w 1 w/100 ma < 6 ms < 4 ms < 11 ms agcdo 3 x 10 7 switching operations 2.5 x 10 5 switching operations 1150461001 ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 58 mm/53.5 mm 1 changeover contact usable for high switching-power suitable for switching inductive loads digital signal processing 93 rs 31 with power contacts type cat. no. rs 31, 230 v~ 1128461001 rs 31, 230 v~ 1128431001 rs 31, 230 v~ 1128411001 230 v~, +5 % ?5 % 1 va 2.2 ma~ 250 v 16 a 60 a/200 ms 3.5 kva/480 w 1 w/100 ma < 6 ms < 10 ms < 8 ms agcdo 3 x 10 7 switching operations 2.5 x 10 5 switching operations 1128461001 1128431001 1128411001 ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 58 mm/53.5 mm relay coupler on locking socket profile rs 31 94 relay couplers on sockets rs 32 rs 32 rs 32 ordering data rated data input voltage rated consumption ?(w) rated consumption ~ (va) drop-out current of the relay** (at 20 ?) drop-out current of the relay** (at 20 ?) max. output voltage continuous current derating curve mounted horizontally on rail without clearance continuous current ambient temperature switch-on current max. switching capacity with resistor load min. switching capacity/switching current bounce times switching times, typical ? pick-up lag ? turn off delay max. switching frequency contact material service life, mechanical ? 24 v? 1 a, resistive load ? 230 v~, 3 a, resistive load status indicator storage temperature ambient temperature approvals insulation coordination acc. to en 50178 overvoltage category pollution severity dimensions mounting width length (perpendicular to mounting rail) height with ts 32/ts 35 x 7.5 schematic circuit diagram type cat. no. rs 32 9406021001 12 v? ?0 % 0.6 w 9.5 ma 250 v 2 x 4 a 2 x 6 a 1400 va 4 ms 13 ms 10 ms agni0.15, gold-flashed > 30x10 6 switching operations red led ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 68 mm/63.5 mm type cat. no. rs 32 9406121001 24 v? ?0 % 0.6 w 5 ma 250 v 2 x 4 a 2 x 6 a 1400 va 4 ms 13 ms 10 ms agni0.15, gold-flashed > 30x10 6 switching operations red led ?0 ??60 ? ?5 ??40 ? csa iii 2 25 mm 70 mm 68 mm/63.5 mm type cat. no. rs 32 9406221001 24 v 0 , ?0 % 0.6 w 0.9 va 24 v? 4.5 ma 24 v~: 2.5 ma 250 v 2 x 4 a 2 x 6 a 1400 va 4 ms 13 ms 10 ms agni0.15, gold-flashed > 30x10 6 switching operations red led ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 68 mm/63.5 mm type cat. no. rs 32 9406321001 48 v? ?0 % 0.6 w 2 ma 250 v 2 x 4 a 2 x 6 a 1400 va 4 ms 13 ms 10 ms agni0.15, gold-flashed > 30x10 6 switching operations red led ?0 ??60 ? ?5 ??40 ? csa iii 2 25 mm 70 mm 68 mm/63.5 mm 9406021001 9406121001 9406321001 9406521001 with 2 changeover contacts digital signal processing 95 rs 32 type cat. no. rs 32 9406421001 48 v 0 , ?0 % 0.6 w 0.9 va 48 v? 2 ma 48 v~: 4.5 ma 250 v 2 x 4 a 2 x 6 a 1400 va 4 ms 13 ms 10 ms agni0.15, gold-flashed > 30x10 6 switching operations red led ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 68 mm/63.5 mm type cat. no. rs 32 9406521001 60 v? ?0 % 0.6 w 1.5 ma 250 v 2 x 4 a 2 x 6 a 1400 va 4 ms 10 ms 10 ms agni0.15, gold-flashed > 30x10 6 switching operations red led ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 68 mm/63.5 mm type cat. no. rs 32 9406621001 115 v 0 , +5 % ?5 % 0.5 w 0.6 va 115 v? 1 ma 115 v~: 1.5 ma 250 v 2 x 4 a 2 x 6 a 1400 va 4 ms 13 ms 10 ms agni0.15, gold-flashed > 30x10 6 switching operations red led ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 68 mm/63.5 mm type cat. no. rs 32 9406721001 230 v 0 , +5 % ?5 % 1 w 1 va 230 v? 1.2 ma 230 v~: 2 ma 250 v 2 x 4 a 2 x 6 a 1400 va 4 ms 13 ms 10 ms agni0.15, gold-flashed > 30x10 6 switching operations red led ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 68 mm/63.5 mm type cat. no. rs 32 1122661001 24 v/48 v 0 , ?0 % 0.5 w/0.6 w 0.7 va/0.9 va ? 5 ma/2 ma ~: 3 ma/4.5 ma 250 v 2 x 4 a 2 x 6 a 1400 va 4 ms 13 ms 10 ms agni0.15, gold-flashed > 30x10 6 switching operations green led ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 68 mm/63.5 mm type cat. no. rs 32 1122761001 115 v/230 v 0 , +5 % ?5 % 0.5 w/1 w 0.6 va/1 va ? 1 ma/1.2 ma ~: 1.5 ma/2 ma 250 v 2 x 4 a 2 x 6 a 1400 va 4 ms 13 ms 10 ms agni0.15, gold-flashed > 30x10 6 switching operations green led ?0 ??60 ? ?5 ??40 ? iii 2 25 mm 70 mm 68 mm/63.5 mm 9406221001 9406421001 9406621001 9406721001 1122661001 1122761001 relay couplers on sockets rs 32 96 multiple socket interface rsm rsm 4 r 4 relays, soldered rsm 4 rs 4 relays, plug-in rated data input voltage rated consumption ?w) soldered relay plug-in relay rated consumption ~(va) soldered relay plug-in relay pick-up current (ma) soldered relay (ma) plug-in relay pick-up current ~ (ma) soldered relay (ma) plug-in relay drop-out current of the relay (at 20 ?) max. output voltage continuous current derating-curve a = mounted horizontally on rail without clearance b = mounted horizontally on rail with clearance 20 mm continuous current ambient temperature switching times, typical ? pick-up lag (?~) ? turn off delay (?~) bounce times switch-on current switching capacity with resistive load min. switching capacity/switching current contact material service life, mechanical ? 24 v? 1 a, resistive load ? 230 v~, 3 a, resistive load storage temperature ambient temperature insulation coordination acc. to en 50178 overvoltage category pollution severity dimensions conductor cross-section (screw connection) spare relay (pluggable) for 24 v-rsm types for 48 v-rsm types for 115 v, 230 v-rsm types also available as opto-coupler (max. 48 v), see page 120/121 schematic circuit diagram fixing feet can also be mounted turned through 180 dc voltage, positive switching 24 v 24 v 0 48 v 48 v 0 115 v~ 115 v 0 230 v~ 230 v 0 0.45 w 0.45 w 0.45 w 0.45 w 0.55 w 0.55 w 0.5 va 0.6 va 0.6 va 0.6 va 0.9 va 0.9 va 0.6 va 0.6 va 1.2 va 1.2 va 12 ma 10 ma 5 ma 3 ma 23 ma 12 ma 14 ma ? ma 3.5 ma 16.5 ma 5 ma 4 ma 2 ma 1.5 ma 1 ma 1 ma 250 v 250 v 250 v 250 v 250 v 250 v 250 v 250 v 6 a 6 a 6 a 6 a 6 a 6 a 3 a 3 a 8 ms 10 ms/10 ms 12 ms 10 ms/12 ms 10 ms 8 ms/10 ms 10 ms 8 ms/10 ms 7 ms 15 ms/20 ms 11 ms 15 ms/20 ms 10 ms 5 ms/8 ms 10 ms 7 ms/8 ms 3 ms 3 ms 3 ms 3 ms 3 ms 3 ms 3 ms 3 ms 8 a 8 a 8 a 8 a 8 a 8 a 8 a 8 a 2000 va 2000 va 2000 va 2000 va 2000 va 2000 va 2000 va 2000 va 250 mw/10 ma agni 90/10, agni0,15, gold-flashed > 30x10 6 switching operations >5 x 10 5 switching operations >7 x 10 5 switching operations ?0 ??60 ? ?5 ??50 ? iii 2 0.5?.5 mm 2 input voltage contact material cat. no. notes 24 v agni 90/10 8630780000 rt 314024 with yoke 24 v agni 90/10 4058480000 rt 314024 without yoke 48 v agni 90/10 8630790000 rt 314048 with yoke 48 v agni 90/10 4058740000 rt 314048 without yoke 115 v agni 90/10 8630770000 rt 314110 with yoke 115 v agni 90/10 4058500000 rt 314110 without yoke 115 v au 5 4156970000 zlt input relay khu/bv 1680 rsm 8 r 8 relays, soldered rsm 8 rs 8 relays, plug-in (relay coupler) with one changeover contact each digital signal processing 97 ordering data connection technology input/output ribbon cable/ screw connection male connector block with interlock according to din 41651/parts 1 and 2 screw connection ?input: - relay pluggable screw connection and male conn. block acc. to iec 603-1/ din 41651 - relay soldered male conn. block acc. to iec 603-1/ din 41651 ?output: screw connection spare relays on request red leds, further colours on request dc voltage, negative switching ac-dc/dc voltage rsm 16 rs 16 relays, plug-in input rsm 4 r/rs rsm 8 r/rs rsm 16 r/rs positve negative relay relay relay mounted voltage 4 relays 8 relays 16 relays switching 1 ) switching 2 ) pluggable pluggable soldered width 24 vdc 1113161001 145 mm 1100061001 145 mm 1113261001 285 mm 1100161001 285 mm 24 vdc 1113361001 3 ) 8017581001 4 ) 1112361001 75 mm 1113461001 3 ) 1112761001 75 mm 1113561001 3 ) 8003671001 4 ) 1107761001 145 mm 1113661001 3 ) 1112661001 145 mm 1113761001 3 ) 8018221001 4 ) 1107861001 285 mm 1113861001 3 ) 1113061001 285 mm 24 v 0 1173461001 75 mm 1173561001 145 mm 1173661001 285 mm 48 vdc 1113961001 1112461001 75 mm 1114061001 75 mm 1114161001 145 mm 1114261001 145 mm 1114361001 285 mm 1114461001 285 mm 48 v 0 1173761001 75 mm 115 v 0 1114561001 75 mm 1114661001 145 mm 1114761001 285 mm 230 v~ 1114861001 75 mm 1114961001 145 mm 1115061001 285 mm 230 v 0 1123461001 75 mm 1108061001 145 mm 1108261001 285 mm 1 ) common negative potential, positive is switched 2 ) common negative potential, negative is switched 3 ) approval by the germanischer lloyd 4 ) empty modules without relays multiple socket interface rsm 98 the contacts available at the output are: 2, 3 or 4 changeover contacts. the marking of the contacts in the follow- ing diagram corresponds to european standard en 50005. the standard range of relay socket mod- ules is divided as follows: group 1: rs 3 (2 changeover contacts) rs 4, rs 14 (4 changeover contacts) for relays of the type ?nternational group 2: rs 6 (2 changeover contacts) size 1 rs 7, 17 (3 changeover cont.) size 2 rs 8, 18 (4 changeover cont.) size 2 rs 9 (2 changeover cont.) size 2 for relays of the type "european". relays with 4 changeover contacts (size 2) can be secured to rs 7, rs 17 and rs 9; however, only 3 or 2 changeover contacts are connected to the terminals, which results in space savings. group 3: rs 21 (2 changeover contacts) rs 23 (3 changeover contacts) rs 24 (2 x 3 changeover cont.) for relays with one socket with 8 or 11 pins. the table on page 87 offers an overview of the most important manufacturers of relays in groups 2, 3 and 4. the list is pro- vided for information purposes only, and does not claim to be complete weidm?ller relay sockets for mounting rails enable plug-in relays most commonly used in industry to be mounted; they make possible installations in which the control section and power section are per- fectly separated. the coil terminals and the connection terminals are located on opposite sides of the locking socket mod- ules. the conductors are connected via screw terminals; the securing in the terminal is achieved by a clamping yoke system. this method has been used by weidm?ller for many years, and is the only method that guarantees a reliable connection in indus- trial applications. thanks to their combination foot, these modules can be mounted onto ts 32, ts 35x7.5, ts 35x15 mounting rails in accor- dance with european standards en 50035 and en 50022. the connections are marked according to european standard en 50005. the mod- ules are designed for dc relays (with a damping diode parallel to the coil, as well as a protection diode for reverse polarity protection) and ac relays. they can be provided with an led on request. dc voltage ac voltage the input terminals are doubled, in order to pick off the poles. note the following for dc current operation: a1 = + a2 = ? relay socket module for industry relays digital signal processing 99 list of plug-in relays for weidm?ller relay socket modules manufacturer eberle elesta feme gruner haller itt (mti) fujitsu kuhnke kuke national omron potter & brumfield rapa tyco/schrack sds tec zettler group 1 international relays ?rs 3 2 changeover contacts ?rs 4, rs 14 4 changeover contacts relay type ?mat 2 ?mat 4 ?frl 263-02 ?frl 263-04 ?type 111 a4 ?hc 2 ?hc 4 ?my 2 ?my 4 ?series kh ?zt 4 ?pt 4 ?hc 2 ?hc 4 ?type 1301 ?tec 1401 group 2 european relays ?rs 6 2 changeover contacts (size 1) ?rs 7, rs 17 3 changeover cont. (size 2) ?rs 8, rs 18 4 changeover cont. (size 2) ?rs 9 2 changeover cont. (size 2) relay type ?type 40701 ?type 40701 ?series 9065 g ?series 9059 g/9066 g ?series 9059 g/9066 g ?series 9059 g/9066 g ?series h-561 size 1 ?series h-561 size 2 ?series h-561 size 2 ?series h-561 size 2 ?type 24 ?type 25 ?type 25 ?type 25 ?miniature relays type 01 ?miniature relays type 02 ?miniature relays type 02 ?miniature relays type 02 ?mhs-2 ?mhs-4 ?mhs-4 ?mhs-4 ?series r 10 ?series r 10 ?series r 10 ?series 012 size 1 ?series 012 size 2 ?series 012 size 2 ?series 012 size 2 ?relays n, s, w size 1 ?relays n, s, w size 2 ?relays n, s, w size 2 ?relays n, s, w size 2 ?k 2 ?k 4 ?k 4 ?k 4 ?type 1350 ?type 1360 ?type 1360 ?type 1360 ?az e 20, az 420, az 420 w ?az e 21, az 421, az 421 w ?az e 21, az 421, az 421 w ?az e 21, az 421, az 421 w group 3 relays with socket oktal ?rs 21 2 changeover contacts ?rs 23 3 changeover contacts ?rs 24 2x3 changeover contacts relay type ?type 41454 ?type 41454 ?skr 085 ?skr 115 ?rcp 8 ?rcp 11 ?rcp 11 ?series 668 b 2 changeover contacts ?series 668 a 3 changeover contacts ?series 668 a 3 changeover contacts ?hb-1/1 ?hb-1/2 ?hb-1/2 ?frl 256-02 ?frl 256-04 ?frl 256-04 ?universal relays-m/-h/-u ?universal relays-m/-h/-u ?universal relays-m/-h/-u ?mk 2 ?mk 3 ?mk 3 ?series kap ?series kap ?series kap ?series c-type ckr ?series c-type ckr ?series c-type ckr ?series rn/rc ?series rn/rc ?series rn/rc ?type 1210 ?type 1210 ?type 1210 ?az 1010 ?az 509 2 c ?az 1010 ?az 509 3 c ?az 1010 ?az 509 3 c 100 relay sockets for industry relays pt 4 industry relays 4-pole, with test button rated data contact data contact number and type contact version contact material max. braking capacity ac rated voltage continuous current switch-on current min. contact rating mechanical service life response / drop out time bounce time test voltage isolation acc. to iec664 rated voltage pollution severity overvoltage category insulation group / reference voltage approvals miscellaneous data protection class flammability class ul 94 ambient temperature dc coil ac coil weight correspond. relay socket ordering data 6 v 12 v 24 v 48 v 60 v 115 v 6 v~ 12 v~ 24 v~ 48 v~ 60 v~ 115 v~ 230 v~ retainer clip for siemens-relays 4 changeover contacts single contacts agni 90/10, agni 90/10 htv 1500 va 250 v~ 6 a / contact 12 a / contact 24v, 10 ma / 20 m, 1 ma htv dc coil > 30x10 6 ac coil > 20x10 6 15/10 ms 5 ms 2.5 kv eff coil / contact b, 60 v~/75 v 250 v 2 iii b/250 vde, ul, csa ip50 v-0 -40 ?+ 70 ? -40 ?+ 70 ? 30g ?relay sockets type rs 3, rs 4 and rs 14 ?alternatives to zt 4 see table on page 99 type (zt 4) best.-nr pt 570006 8074650000 pt 570012 8054360000 pt 570024 1180700000 pt 570048 8074670000 pt 570060 8074680000 pt 570110 8074700000 pt 570506 8074710000 pt 570512 8074730000 pt 570524 1181800000 pt 570548 1180900000 pt 570560 8074760000 pt 570615 1180800000 pt 570730 1181100000 pt 28800 8572170000 0125661001 schrack type pt 5 4-pole 4 changeover contacts rs 14 0125561001 1157561001 0125661001 1127661001 8025451001 45 mm 7 mm 0.5? mm 2 0.5?.5 mm 2 awg 26?4 250 v 0 125 v~ 5 a type cat. no. qty. ts 32 0122800000 ts 35x7.5 0383400000 ts 35x15 0498000000 ewk 2 0199360000 50 ew 35 0383560000 50 eso 7 0515200000 sst 7 0515300000 100 zg 28800 0116000000 25 digital signal processing 101 relay sockets for industry relays relay sockets for dc and ac voltage relays with fixing foot for ts 32/ts 35x7.5 and ts 35x15 relay type* contacts on module ordering data sockeltyp relay socket for ac relays (without diode) with red led (230 v~) relay socket for dc relays with suppressor diode and reserve voltage protection (diode 1 n 4007) with red led (24 v? with green led (24 v? dimensions relay socket width insulation stripping length connection data screw connection, solid screw connection, flexible conductor cross-section rated data coil voltage (types without led) contact voltage contact current accessories mounting rail (2 m lenghts) end bracket (thickness mm) insert tag (blanc)** protective strip, transparent** retainer clip for schrack relays schrack schrack type pt 5 type pt 5 4-pole 4-pole 2 changeover contacts 4 changeover contacts rs 3 rs 4 0115161001 0116261001 0115061001 0116161001 0116121001 0115011001 35 mm 65 mm 7 mm 7 mm 0.5? mm 2 0.5? mm 2 0.5?.5 mm 2 0.5?.5 mm 2 awg 26?4 awg 26?4 250 v 0 250 v 0 250 v~ 125 v~ 5 a 5 a type cat. no. qty. ts 32 0122800000 ts 35x7.5 0383400000 ts 35x15 0498000000 ewk 2 0199360000 50 ew 35 0383560000 50 eso 7 0515200000 sst 7 0515300000 100 zg 28800 0116000000 25 * relay not included in delivery rs 3 rs 4 rs 14 102 relay sockets for industry relays rs 6 rs 6 rs 8 rs 9 rs 17 rs 18 assigning commercially available relays to the weidm?ller relay sockets rs 6...rs 24: ? relay socket rs 6 siemens cradle relay, size i zettler cradle-operated relay az 420 rapa range 012, size 1 ? relay socket type rs 7, rs 8, rs 9, rs 17 and rs 18 siemens cradle relay, size ii zettler cradle-operated relay az 421 rapa range 012, size ii ? relay socket type rs 21, rs 23 and rs 24 siemens/schrack universal industry relay rs/rn/rc siemens industry relay 10 kuhnke universal relay zettler industrial relay az 1010 rapa range c (no claim is made that this is a complete list of manu- facturers of relays or types of relays.) relay type* ordering data socket type relay socket for ac relays (without diode) relay socket for dc relays with suppressor diode and reserve voltage protection (diode 1 n 4007) with red led (24 v? with green led (24 v? dimensions relay socket width insulation stripping length connection data screw connection, solid screw connection, flexible conductor cross-section rated data coil voltage (types without led) contact voltage contact current accessories mounting rail (2 m lenghts) end bracket (thickness mm) insert tag (blanc)** protective strip, transparent** retainer clip for schrack relays * relay not included in delivery ** not suitable for rs 12 relay socket for dc and ac voltage relays with locking foot for ts 32 ts 35x7.5 and ts 35x15 0126061001 kamm-r. kamm-r. gr. ii gr. ii 3 changeov. c. 4 changeov. c. (e. g. b 110) (e. g. b 110) rs 17 rs 18 0125861001 0126061001 0126011001 35 mm 45 mm 7 mm 7 mm 0.5? mm 2 0.5? mm 2 0.5?.5 mm 2 0.5?.5 mm 2 awg 26?4 awg 26?4 50 v 0 250 v 0 125 v~ 125 v~ 5 a 5 a type cat. no. qty. ts 32 0122800000 ts 35x7.5 0383400000 ts 35x15 0498000000 ewk 2 0199360000 50 ew 35 0383560000 50 eso 7 0515200000 sst 7 0515300000 100 0115461001 kamm-r. kamm-r. kamm-r. kamm-r. gr. i gr. ii gr. ii gr. ii 2 changeov. c. 3 changeov. c. 4 changeov. c. 2 changeov. c. (e. g. b 104) (e. g. b 110) (e. g. b 110) (e. g. b 104) rs 6 rs 7 rs 8 rs 9 0115361001 0115261001 0115461001 0116361001 0188961001 35 mm 50 mm 65 mm 35 mm 7 mm 7 mm 7 mm 7 mm 0.5? mm 2 0.5? mm 2 0.5? mm 2 0.5? mm 2 0.5?.5 mm 2 0.5?.5 mm 2 0.5?.5 mm 2 0.5?.5 mm 2 awg 26?4 awg 26?4 awg 26?4 awg 26?4 250 v 0 250 v 0 250 v 0 250 v 0 250 v~ 250 v~ 125 v~ 250 v~ 5 a 5 a5 a5 a type cat. no. qty. ts 32 0122800000 ts 35x7.5 0383400000 ts 35x15 0498000000 ewk 2 0199360000 50 ew 35 0383560000 50 eso 7 0515200000 sst 7 0515300000 100 0167161001 plug-in relay for plug-in relay for octal socket submagnal socket 8-pole 11-pole 2 changeov. c. 3 changeov. c. 2 x 3 changeov. c. rs 21 rs 23 rs 24 on request 8010061001 on request 0167161001 0188661001 on request 35 mm 40 mm 75.5 mm 7 mm 7 mm 7 mm 0.5? mm 2 0.5? mm 2 0.5? mm 2 0.5?.5 mm 2 0.5?.5 mm 2 0.5?.5 mm 2 awg 26?4 awg 26?4 awg 26?4 250 v 0 250 v 0 250 v 0 250 v~ 250 v~ 250 v~ 6 a 6 a6 a type cat. no. qty. ts 32 0122800000 ts 35x7.5 0383400000 ts 35x15 0498000000 ewk 2 0199360000 50 ew 35 0383560000 50 eso 7 0515200000 sst 7 0515300000 100 digital signal processing 103 rs 21 rs 23 rs 24 relay coupler, relay sockets module for industry relays 104 opto-coupler 105 digital signal processing opto-coupler basic construction of the opto-coupler interface: the heart of the system is the opto- electronic component (opto-coupler) that effects the coupling. an important parameter of this type of modules is the ctr = current transfer rate. the ctr is given in % and is the ratio between the input current if and the maximum available output current ic. example: if = 10 ma; ctr = 100% => ic = 10 ma. the ctr is affected by a number of parameters such as: - ambient temperature - efficiency of the luminescence diode - geometric dimensions within the module it also drops with time. the result is that the switching levels change due to ageing. ctr as a function of operating life to eliminate these effects where possible, weidm?ller opto-coupler use almost exclusively semiconductors which have a long life in terms of ctr. moreover, the insulation of a module is highly important, since the actual coupling of the input and output circuits takes place optically. thus the optical component has to guarantee separation of both circuits even in case of a defect. weidm?ller opto-coupler comply with din vde 0884 to provide a maximum level of safety. appropriate switching circuits need to be included to ensure that the entire com- ponent provides reliable separation in accordance with din vde 0106, part 101. circuit diagram of an opto-coupler opto-coupler for protective separation or galvanic isolation the most important precondition for achieving protective separation with opto- electronic coupling modules is the partial discharge test in accordance with din vde 0884. double or reinforced insulation for protective separation must be dis- charge proof. high voltage tests, as are usual with relays, cannot be carried out with semi-conductors, because they could lead to the destruction of the semi-con- ductor. safe separation for the given rated voltage is applicable to coupling modules that are integrated into opto-couplers if: - the opto-couplers are tested according to din vde 0884 - clearance and creepage distances on the pcb and connection elements cor- respond to en 50 178, din vde 0106 and 0109. with increasing automation, potential separation between the control and field sides of circuits is becoming increasingly important. the control unit being the core of the automation must be electrically safe and free from feedback when coupled with the various sensors and actuators. opto- coupler are being used in a growing num- ber of applications. they offer the neces- sary safety and have further advantages such as: - low power uptake on control side - high switching frequency - no contact bounce - wear-free switching - insensitive to vibration - use independent of location - no mechanical parts - long life - high insulation voltage because of these features, opto-coupler are an alternative to conventional, me- chanical relay interfaces. for industrial usage, weidm?ller offers modules with various input voltages and housings. input from control output to periphery receiver t (life time) ctr in % sender 106 opto-coupler control side of the opto-coupler interface 3 basic circuits are to be differentiated on the input side of the opto-coupler#s inter- face: - as a pure dc input with polarity protec- tion diode wich prevents the opto-cou- pler from being destroyed if the input polarity is reversed. - as an ac/dc input: wrong polarity of the dc input signal is not possible with this switching. the disadvantage of an ac/dc input cir- cuit (driven by dc signal) is the low switching rate since the charging capacitor (cl, necessary for ac-input signal) lowers the max. switching rate. - pure ac-input: here, too, the charging capacity lowers the max. switching rate considerably. weidm?ller opto-coupler with ac/dc or ac input signals are designed for 40?0 hz power supply. with ac-signal input the max. switching rate is below half the power supply frequency. a high switching rate is not possible, oth- erwise continuous switching in tune with the power frequency would occur. output side of the opto-coupler weidm?ller opto-coupler are designed and sized for a wide variety of applications. demands regarding the load side of opto- couple modules could be: - power amplification - signal conditioning ac/dc, dc/ac - short-circuit protection - interference proof, etc. to fulfil these requirements, the opto-cou- pler must contain additional electronic components which determine the func- tionality of the opto-coupler. thus there are 2 basic output variations for opto-coupler output as - 2 pole and - 3 pole circuits 2-pole dc output the 2-pole dc output is comparable to a conventional switch. with this type it is immaterial where the load is in the output circuit. it is, however, important to provide the necessary output supply voltage with the right polarity. * sample circuit * wiring example 107 digital signal processing opto-coupler 3-pole dc output this type of output stage requires for safe function a potential-linked output voltage supply with an output that is either positive switching (common reference potential is gnd or 0 v) or negative switching (common reference potential is the positive voltage pole). standards weidm?ller opto-coupler comply with the following standards: en 50 178 furnishing of power engineering systems with electronic equipment din vde 0106 part 101 protection against flow of dangerous currents into the human body; basic requirements for reliable separation within electrical equipment. din vde 0884 optoelectronic coupling devices for reliable separation din vde 0109 insulation coordination within low-voltage system including clearance and creepage distances for equipment protective circuit all opto-coupler have a protective circuit in the output (generally a free-wheeling diode). to prevent decoupling of interference signals to other leads the load side should be protected. protective circuit for dc output protective circuit for ac output application example position monitoring with namur intiator monitoring an actuator opto-couplers are normally given with an output voltage supply from 5?8 vdc. these values should not be cut or exceed- ed on any occasion. the load current should not be higher than the stated max. output current. continuously exceeding this value will destroy the output stage. the derating curve shows the dependency of the output current as a function of the ambient temperature (see under the respective product on the following pages). 2-pole ac output a special semiconductor element (triac) in the output stage of the opto-coupler is used to switch ac voltages. as for the dc-versions the appropriate parameters (such as voltage, frequency, max. load current, ambient temperature) should be given consideration. a neutral voltage switch ensures that the load is switched only in the voltage zero. to protect against voltage spikes, the modules are allways fitted with appropriate protection elements (varistors, rc-combi- nation). inputs plc plc inputs opto-coupler output opto-coupler output opto-coupler input optoc-oupler input sample circuit protection protection load load zero voltage switch actuator, e. g. solenoid namur- initiator 108 t ypes of housing for opto-coupler weidm?ller coupler modules are enclosed in housings that are appropriate for industrial applications. the housings are suitable for fitting onto mounting rails ts 32, ts 35 x 7.5 or ts 35 x 15 in accordance with european standards en 50 035 and en 50 022. component housing eg weidm?ller component housings eg 1 and eg 2 are 18 mm wide. the fully enclosed eg housings are fitted with clamping yoke screw connections or push-on blade connectors for attaching wires. conductors with the following cross-sectional dimensions can be con- nected: solid conductors: 0.5? mm 2 or flexible conductors: 0.5?.5 mm 2 . the component housing eg 7 has a spe- cial status. is has been specifically designed to accommodate 10-mm slim opto-couplers. eg 7 opto-coupler modules can be mounted onto ts 32 or ts 35 rails. the rs eg7 locking socket is also avail- able for the ost opto-couplers. the fully-enclosed eg 7 housing is fitted with clamping yoke connections. conductors with the following cross- sections can be connected: component housing eg7: 0.5?.5 mm 2 locking socket: 0.5?.5 mm 2 . component housing wavebox component housing wavebox it is important for modern electronics to create a functional housing. setting and operating functions must be guaranteed, technical demands regarding heat dissipa- tion and emc properties are to be sup- ported. the ideal design saves space and mounting costs in the switchgear cabinet. moreover, ergonomics and the design are gaining in importance for high-quality opto-couplers interfaces. the wavebox fulfils these criteria and has the following distinguishing features: the wavebox is characterised by: optimal width for any application (12.5 mm, 17.5 mm, 22.5 mm) large component assembly surface; smd? can be mounted on the solder side no tools required for assembly plug-in printed circuit board plug-in cross-connection via zqv 2.5 n hinged, transparent cover blz 5.08 screw/plug and socket connector blfz 5.08 optional tension clamp/plug and socket connector marking option with ws tags suitable for snap-fitting on ts 35 connection systems available are blz screw-type connectors as well as the blzf tension clamp system for up to 2.5 mm 2 flexible conductors for maximum wiring flexibility. printed-circuit board removal this takes place by pushing in the locking hooks in way of the cover and with draw- ing of the terminal level and printed circuit board from the housing. this must not take place with the supply connected. cross-connection housings of the same family arranged side by side, can be cross-connected in the base of the housing with the zqv 2.5 n/2 cross-connector. the cross-connection can be loaded with a current of up to 8 a. by means of this arrangement, the supply voltage can be cross-connected from one electronic module to another. the voltage transferred from the cross-connection to the terminal level must not exceed 50 v. air vents slanted air vents control the temperature and ventilate the housing base. modular system plugseries/plug opto is a new generation of pluggable ssr. the core is an innovative relay socket pxs or pxz . both products combine weidm?ller functionality and experience gained from the relay and terminal business. the plugopto is the ideal connection technology between ssr and the application. modular principle the new plugseries is particularly ser- vice friendly. commercially available ssrs are simply plugged: holding / dismounting clamps guarantee secure mounting; led indicators with free-wheeling diode can be simply plugged. easy plugging of ssr - suitable for the standard design and rt independent connection technology: screw or tension clamp rated cross-section 0.5 2.5 mm2 robust holding / dismounting clamp control voltage 24 vac/vdc rated switching voltage 24 vdc, 24 vac/vdc, 230 vac up to 5 a continuous current low wiring costs thanks to zqv 2.5n (pluggable) cross-connectors service-friendly modular system - relay socket, led indicator - holding clamp and ssr - mount onto ts 35 - marking options with ws marking tags and holding clamps pluggable led indicator with free-wheel- ing diode 109 digital signal processing weidm?ller locking socket rs the locking socket with opto-couplers rs 40 have a width of 11.2 mm. the modules on locking socket profiles are equipped with clamping yoke (screw connection) units for conductor connection. connectable are: solid conductors: 0.5? mm 2 flexible conductors: 0.5?.5 mm 2 . locking socket with multiple interfaces multiple interfaces rsm are optionally available assembled with 4, 8 or 16 plug- gable opto-couplers. versions are avail- able with joint positive and negative poten- tials in order to reduce wiring on the input side. pcb clamping yoke screw connecter ele- ments have clamping yoke units for con- necting conductors with the following cross-sections: solid conductors: 0.5...4 mm 2 flexible conductors: 0.5...2.5 mm 2 variants of the rsm couplers have male connector blocks on the input side for connecting pre-assembled cables, in accordance with iec 603-1/din 41651. mini-coupler all parts of the mini-coupler dkr and dko meet the specifications for a design that is as slim as possible. the sensational width of a mere 6 mm can be achieved by employing the latest surface-mounted devices (smd). there are 4 or 5 screw connections available which accept conductors with cross-sectional dimensions from 0.5? mm 2 . the mini- coupler offer a wide range of options for coupling digital sensor/actuator signals between automation devices and the process stage. with dko opto-coupler, signals from the field with different volt- ages can be picked up and unified. miniconditioner mcz the mcz-housing is distinguished as one of the slimest component-housings. a tool width of only 6 mm reduces space requirements in cabinets. the mcz is characterized by: - tension-clamp connection - integrated cross-connection option for input and output minimise wiring costs. the mini conditioner mczo (opto-cou- plers) have 4 and 5 z-tension spring con- nections. the clampable conductor cross- section is 0.5...1.5 mm 2 . ce-marking weidm?ller opto-coupler are marked with the ce symbol and comply with the requirements of en 50 081 part 1 and en 50 082 part 2. they can therefore be used for both industrial as well as for commercial and light industry. appropriate esd measures should be taken during installation. if connecting wires are particularly long, overvoltage protection should be provided in order to prevent interference from electrical disturbance in the atmosphere. 24 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 24 - 250 v 5 - 48 v 5 - 48 v 5 - 48 v housing 20 ma 0.1 a 0.5 a 20 ma 2.5 a 5 a 3.5 a 0.1 a 0.1 a 0.1 a eg 0558160000 0609860000 8220870000 page 122 page 123 page 130 waveseries 8275190000 8237720000 wos page 126 page 128 eg 7 8269050000 8281720000 page 131 page 131 8092530000 8234580000 page 132 rs 40 1160961001 1117461001 1161761001 8065031001 1177860000 1119460000 page 137 page 137 rsm 11 23861001 1124261001 1124661001 11 23761001 1125261001 8018220000 11 25161001 8003671001 1124900000 8017581001 1124900000 1170200000 11 24900000 1170200000 1153200000 1 17 0200000 1153200000 1121300000 11 53200000 1121300000 8082471001 11 2 1300000 8021391001 1124900000 page 139 1124900000 1170200000 1170200000 1153200000 1153200000 1121300000 1121300000 page 139 page 139 dko 32 8008090000 8019580000 page 116 page 117 dko 35 8008150000 8019590000 8215600000 page 116 page 117 81 8 1990000 8028300000 8215630000 page 118 8215640000 page 118 8248790000 page 117 dko 35/32 8228640000 8228630000 page 119 page 118 mcz o 8365940000 8398940000 8287730000 page 114 page 115 page 114 8324610000 (5 v ttl) page 115 plugseries 8610840000 8610860000 pos/poz 8610920000 8610930000 8610900000 8610910000 8610970000 8610980000 8610890000 8615590000 8610960000 8615630000 8615600000 page 134 8615640000 8615620000 8615650000 page 134 110 opto-coupler output 4 x 8 x 16 x reliable separation 24 v dc 24 vuc/ac electronic switching replacement opto-coupler dc and ac/dc empty socket 115 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 24 - 250 v 5 - 48 v 5 - 48 v 5 - 48 v housing 20 ma 0.1 a 0.5 a 20 ma 2.5 a 5 a 3.5 a 0.1 a 0.1 a 0.1 a eg 0131860000 page 123 waveseries 8235180000 8296250000 8259950000 8275360000 wos page 125 page 126 page 127 page 128 eg 7 8092570000 8234600000 8397420000 8315590000 page 133 rs 40 1161161001 1161960000 page 137 dko 32 8027980000 page 119 dko 35 8077860000 page 119 8131660000 page 120 mcz o 8421060000 page 114 digital signal processing 111 48 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 24 - 250 v 5 - 48 v 5 - 48 v 5 - 48 v housing 20 ma 0.1 a 0.5 a 20 ma 2.5 a 5 a 3.5 a 0.1 a 0.1 a 0.1 a eg 7 8092550000 page 132 8234590000 page 132 rs 40 1161061001 page 137 1161860000 page 137 dko 35 8151230000 page 120 opto-coupler output 4 x 8 x 16 x 4 x 8 x 16 x reliable separation vdc vuc/ac electronic switching 4 x 8 x 16 x 4 x 8 x 16 x output 230 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 24 - 250 v 5 - 48 v 5 - 48 v 5 - 48 v housing 20 ma 0.1 a 0.5 a 20 ma 2.5 a 5 a 3.5 a 0.1 a 0.1 a 0.1 a eg 0546360000 page 123 waveseries 8275380000 8275220000 8275400000 82 75 3 40000 wos page 125 page 126 page 127 page 128 eg 7 8092590000 8234610000 8387580000 8394990000 page 133 rs 40 1161461001 1162060000 8182690000 page 137 dko 32 8008100000 page 119 dko 35 8008160000 page 119 mcz o 8421380000 page 114 112 opto-coupler output 4 x 8 x 16 x 230 vuc/ac electronic switching 4 x 8 x 16 x 12 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 5 - 48 v 24 - 250 v 5 - 48 v 5 - 48 v 5 - 48 v housing 20 ma 0.1 a 0.5 a 20 ma 2.5 a 5 a 3.5 a 0.1 a 0.1 a 0.1 a ego 8011250000 0114260000 page 122 page 122 waveseries 8275500000 wos page 124 ego 7 8092510000 8234570000 page 132 rs 40 1118760000 1161660000 page 137 rsm o 8017581001 8003671001 8018221001 112 1200000 1121200000 1121200000 112 4800000 1124800000 1124800000 page 139 8021391001 8082471001 1121200000 1121200000 1124800000 1124800000 page 139 page 139 dko 35 8184030000 page 116 113 digital signal processing 3?0 v ego, 3? v 0266160000 page 122 ego, 3?2 v 8011250000 page 122 waveseries 8275430000 wos 5 v page 124 waveseries 8275210000 wos 5 v ttl page 129 waveseries 8275390000 wos 3.5 - 15 v page 124 waveseries 8275450000 wos 12 - 28 v page 129 waveseries 8237730000 8237730000 8275440000 wos 15 - 60 v page 124 page 124 page 127 ego, 7.5 v 8092490000 8234560000 page 132 rs 40, 5 v 1118861001 1161560000 page 137 rsm, 5 v 11 23661001 1124061001 1 124461001 112 11 00000 1121100000 1 121100000 page 139 page 139 page 139 dko 32 8018620000 page 116 dko 35 8018630000 8067100000 page 116 page 120 dko 32/35 8228650000 page 116 opto-coupler output 4 x 8 x 16 x electronic switching 4 x 8 x 16 x reliable separation 12 vdc 12 vuc/ac replacement opto-coupler dc and ac/dc empty socket 114 mcz o 120 vac/dc mcz o 24 vac/dc 20 ma mcz o 24 vac/dc 2 a 2* mcz o 230 vac schematic circuit diagram ordering data for ts 35 technical data input input voltage making threshold input current at u nom rated input consumption max. input frequency capacity working resistance to reduction at dissipated energy functionality output supply voltage max. output current voltage drop at max. load current pulse duration, limiting overload current (not periodic) reverse current (close-circuit current) at u out = 48 v reverse polarity protection free-wheel diode - typ. switch-on delay (at ac phase position dependent) - typ. switch-off delay (at ac phase position dependent) short-circuit proof insulation coordin./reliable separation acc. to en 50 178 rated voltage rated impulse voltage overvoltage category pollution severity clearances and creepage distances insulation coordin.- and voltage proof, input/output mounting rail opto-coupler ambient temperature rowed on mounting rail without clearances ambient temperature rowed with clearances 20 mm storage temperature conductor conductor cross-section approvals overall width accessories end plate further accessories, dimensions and connection data opto-coupler in component housing mini coupler mcz this module can be used: ?between controller and sensor, for feedback of different statuses. ?for direct switching of load currents up to a adc, but also provides ?nline?information about the behaviour of the load current. the mcz-o modules do have following features: ?reduction of installation- and power-up times by using the proved tension-clamp technology ?pluggable cross-connection units in the input side reduce wiring costs ?6 mm width type cat. no. mcz o 24 vac/dc 8287730000 24 vac/dc ?0 % (19.2...28.8ac/dc) approx.16 vac/dc ac: 13 ma / dc: 12 ma ac: approx.220 mw dc: ca.195 mw ac: 10 hz duty factor 1:2 dc: 30 hz duty factor 1:2 no operating indication 24 vdc ?0 % (19.2...28.8 vdc ) 2 a present external necessary yes 300 v 6 kv iii 2 5.5 mm 4 kv eff / 1 min acc. to vde 0884 -25 ??40 ? -25 ??50 ? -40 ??60 ? awg 22...12 1.5 mm 2 ce, ul, csa 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 type cat. no. mcz o 24 vac/dc 8365940000 24 vac/dc ?0 % (21.6...26.4ac/dc) ac: 14.1 vac / dc: 16.8 vdc ac: 11.4 ma / dc: 9.6 ma ac: 5 hz duty factor 1:2 dc: 10 hz duty factor 1:2 no operating indication 5...48 vdc 20 ma 1 v < 150 ma / 10 ms max. 0.16 ma present ac: 10 ms / dc: 20 ms ac: 45 ms / dc: 40 ms 300 v 6 kv iii 2 5.5 mm 4 kv eff / 1 min acc. to vde 0884 -25 ??50 ? -40 ?...+85 ? awg 22...12 1.5 mm 2 ce, ul, csa 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 type cat. no. mcz o 120 vac/dc 8421060000 120 vac/dc -15 % +5 % approx.65 vac/approx.70 vdc approx.3 ma ac: 5 hz duty factor 1:2 dc: 20 hz duty factor 1:2 no operating indication 5...48 vdc 50 ma < 1.6 v < 150 ma / 10 ms max.0.16 ma present 30 ms 40 ms 300 v 6 kv iii 2 5.5 mm 4 kv eff / 1 min acc. to vde 0884 -25 ??40 ? -25 ??50 ? -40 ??60 ? awg 22...12 1.5 mm 2 ce, ul, csa 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 type cat. no. mcz o 230 vac 8421380000 230 vac -15 % +5 % approx.170 vac ac: 10 ma ac: 5 hz duty factor 1:2 yes operating indication 5...48 vdc 20 ma < 1.6 v < 150 ma / 10 ms max.0.16 ma present 300 v 6 kv iii 2 3 mm 4 kv eff / 1 min acc. to vde 0884 -25 ??50 ? -40 ?...+85 ? awg 22...12 1.5 mm 2 ce, ul, csa 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 50? 20 ma 40 50 ? 2 a 50 ma 50? 20 ma ambient temperature derating curve rated to ambient temperature a = rowed without clearances on the mounting rail b = rowed with clearances 20 mm output current 26.4 vac/dc a+b at u in 28 vac/dc 241.50 vac 126 vac/dc b a 40 50 ? b a opto-couplers mcz o 115 digital signal processing mcz o 24 vdc/5 vttl 1* mcz o 5 v ttl/5...48 vdc 2* type cat. no. mcz o 24 vdc 8324610000 24 vdc ?6 % (20?8 vdc) approx.17 vdc 4.7 ma (2.9.2..6.5 ma) dc: 112 mw 100 khz switching ratio 1:2 50 khz switching ratio 1:10 2 ? 5 v (4.75...5.25 v) 5 v ttl (4.75...5.25 v) 8 ma, fan out = 20 ls-ttl 1 ? (at 20 vdc) 2.5 ? (at 28 vdc) 300 v 6 kv iii 2 5.5 mm 4 kv eff / 1 min acc. to vde 0884 -25 ??40 ? -25 ??50 ? -40 ?...+60 ? awg 22...12 1.5 mm 2 ce, ul, csa 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 schematic circuit diagram ordering data for ts 35 technical data input supply voltage input voltage making threshold input current at u nom rated input consumption max. input frequency min. input impulse width output supply voltage output voltage max. output current voltage drop at max. load current pulse duration, limiting overload current (not periodic) reverse current (static current) at u out = 48 v reverse polarity protection free-wheel diode - typ. switch-on delay - typ. switch-off delay insulation coordin./reliable separation acc. to en 50178 rated voltage rated impulse voltage overvoltage category pollution severity clearances and creepage distances insulation coordination/dielectric strength i/o to ts opto-coupler ambient temperature rowed on mounting rail without clearances ambient temperature rowed with clearances 20 mm storage temperature conductor conductor cross-section approvals overall width accessories end plate further accessories, dimensions and connection data opto-coupler in component housing mini coupler mcz type cat. no. mcz o 24 vdc 8398940000 5 vdc 5 % 5 v ttl i il = 1 ? / i ih = 8 ? 2.4 khz 5...48 vdc 100 ma 1.8 v present (input) present approx.27 ? approx.210 ? 300 v 6 kv iii 2 5.5 mm 4 kv eff / 1 min acc. to vde 0884 -25 ??50 ? -25 ??50 ? -40 ?...+85 ? awg 22...12 1.5 mm 2 ce, ul, csa 6 mm type cat. no. ap mcz 1.5 8389030000 page 305 2 ? 2.5 ? 1? input signal at 832461 output signal 8 ma ambient temperature derating curve rated to ambient temperature a = rowed on the mounting rail without clearances b = rowed with clearances 20 mm output current a+b at u in 28.8 vdc 100 ma 5.25 vdc 40 50 ? b a 40 50 ? b a opto-couplers mcz o this module can be used: 1* - between controller and actuator, for the signal conversion of 24 vdc to 5 vttl 2* - between controller and actuator, for the signal conversion of 5 vttl to 5...48 vdc 116 ordering data for ts 32 y for ts 35 w with combination foot ts 32/ts 35 technical data input voltage switch-on voltage input current max. input power output voltage max. output current min. output current max. switching frequency; switching ratio 1: 2 switch-on delay switch-off delay voltage drop at max. load insulation coordination to en 50 178 rated voltage rated impulse voltage overvoltage category pollution severity clearances and creepage distances operating temperature without clearances with clearances storage temperature conductor conductor cross-section overall width accessories end plate further accessories, dimensions and connection data opto-couplers dko ?coupling of digital sensor-/actuator-signals between plc and process ? low cost solution for level- and potential-equalization ?low input power ?screw clamp connection technology ?6 mm width type cat. no. dko dk5 5 vttl 8228650000 input: bottom 5 vttl 1 ? 5?8 vdc 100 ma 50 ? 3 khz approx.27 ? approx.35 ? 1.6 v 300 v 6 kv iv 2 5.5 mm -25 ??50 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dk5 8268870000 page 305 type cat. no. dko 12 vdc 8184030000 input: bottom 12 vdc ?0 % approx.7 v 11 ma 130 mw 24 vdc ?0 % 50 ma 50 ? 10 khz 1 ? 2.5 ? 1 v 300 v 6 kv iv 2 5.5 mm -25 ??50 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 12 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dko 24 vac/dc 8008090000 dko 24 vac/dc 8008150000 input: bottom 24 vac/dc ?0 % 112.8 vac/16.8 vdc 11.4 maac/9.6 madc 280 mva/230 mw 5?8 vdc 20 ma 50 ? ac: 5 hz dc: 10 hz 15 ms at dc 25 ms at dc 1 v 300 v 4 kv iii 2 4 mm -25 ??40 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dko 5 vdc 8018620000 dko 5 vdc 8018630000 input: bottom 5 vdc ? % 2.4 vdc 10 ma 50 mw 5?8 vdc 20 ma 50 ? 20 hz 15 ? 70 ? 1.6 v 150 v 4 kv iv 2 4 mm -25 ??50 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 dko 5 vdc dko 5 vttl dko 12 vdc dko 24 vac/dc schematic circuit diagram switching ratio switching ratio opto-coupler in component housing mini coupler dk 117 digital signal processing ordering data for ts 32 y for ts 35 w technical data input voltage switch-on voltage input current max. input power output voltage max. output current min. output current max. switching frequency; switching ratio 1: 2 switch-on delay switch-off delay voltage drop at max. load insulation coordination to en 50 178 rated voltage rated impulse voltage overvoltage category pollution severity clearances and creepage distances operating temperature without clearances with clearances storage temperature conductor conductor cross-section overall width accessories end plate further accessories, dimensions and connection data type cat. no. dko 24 vdc 8215640000 input: bottom 24 vdc ?0 % approx.19 v/7.5 ma 15 ma 360 mw 5?8 vdc 20 ma 50 ? 3 khz approx.50 ? approx.80 ? 900 mv 300 v 4 kv ii 2 4 mm -25 ??40 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dko 24 vdc 8028300000 input: top 24 vdc ?0 % approx.19 v/7.5 ma 15 ma 360 mw 5?8 vdc 20 ma 50 ? 3 khz approx.50 ? approx.80 ? 900 mv 300 v 4 kv ii 2 4 mm -25 ??40 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dko 24 vdc 8248790000 input: bottom 24 vdc ?0 % approx.19 v/7.5 ma 8.5 ma 204 mw 5?8 vdc 20 ma 50 ? 3 khz approx.50 ? approx.80 ? 900 mv 300 v 4 kv iii 2 4 mm -25 ??40 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dko 24 vdc 8019580000 dko 24 vdc 8019590000 input: bottom 24 vdc ?0 % approx.17 v 6 ma 145 mw 5?8 vdc 500 ma 50 ? 200 hz approx.40 ? approx.65 ? 800 mv 300 v 4 kv ii 2 4 mm -25 ??40 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 opto-coupler in component housing mini coupler dk dko 24 vdc dko 24 vdc dko 24 vdc dko 24 vdc schematic circuit diagram switching ratio switching ratio opto-couplers dko 118 ordering data for ts 32 y for ts 35 w with combination foot ts 32 / ts 35 technical data input voltage switch-on voltage input current max. input power output voltage max. output current min. output current max. switching frequency; switching ratio 1: 2 switch-on delay switch-off delay voltage drop at max. load insulation coordination to en 50 178 rated voltage rated impulse voltage overvoltage category pollution severity clearances and creepage distances operating temperature without clearances with clearances storage temperature conductor conductor cross-section overall width accessories end plate further accessories, dimensions and connection data type cat. no. dko 24 vdc 8215630000 input: top 24 vdc ?0 % approx.17 vdc 6 ma 145 mw 5?8 vdc 500 ma 50 ? 200 hz approx.40 ? approx.65 ? 800 mv 300 v 4 kv iii 2 4 mm -25 ??40 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dko 24 vdc 8181990000 input: bottom 24 vdc ?0 % approx.18 vdc 12 ma 290 mw 24 vdc ?0 % 2 a 100 hz 300 v 4 kv iii 2 3 mm -25 ??40 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 12 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dko 24 vdc 8215600000 input: top 24 vdc ?0 % approx.18 vdc 12 ma 290 mw 24 vdc ?0 % 2 a 100 hz 300 v 4 kv iii 2 3 mm -25 ??40 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 12 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dko 24 vac/dc 8228630000 input: bottom 24 vac/dc 20 % approx.16 vac/dc 13 maac/12 madc 220 mva/195 mw 24 vdc 20 % 2 a ac: 10 hz dc: 30 hz 2 ms 7 ms 300 v 6 kv iv 2 5.5 mm -25 ??40 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dk 5 8268870000 page 305 opto-couplers dko ?coupling of digital sensor-/actuator-signals between plc and process ?low cost solution for level- and potential-equalization ?low input power ?screw clamp connection technology ?6 mm width dko 24 vdc dko 24 vdc dko 24 vdc dko 24 vac/dc schematic circuit diagram switching ratio switching ratio opto-coupler in component housing mini coupler dk mode: green load current 500ma yellow idling red short circuit 119 digital signal processing type cat. no. dko 24 vdc 8228640000 input: top 24 vdc ?0 % approx.17 vdc 4.7 ma 112 mw 5 vttl 8 ma, fan out = 20 ls-ttl 100 khz 1:2/50 khz 1:10 1 ? 2.5 ? 300 v 4 kv iii 2 5.5 mm -25 ??40 ? -25 ??50 ? -25 ??85 ? awg 22?2 0.5?mm 2 6 mm type cat. no. ap dk5 8268870000 page 305 type cat. no. dko 230 vac/dc 8008100000 dko 230 vac/dc 8008160000 input: bottom 230 vac/dc +5 % -15 % approx.130 vac/approx.140 vdc 1.8 maac/1.7 madc 395 mva/370 mw 5?8 vdc 20 ma 50 ? ac: 5 hz/dc: 20 hz 20 ms 20 ms <1.6 v 300 v 4 kv iii 2 3 mm -25 ??50 ? -25 ??50 ? -40 ??85 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 type cat. no. dko 115 vac/dc 8027980000 dko 115 vac/dc 8077860000 input: bottom 11 5 vac/dc +5 % -15 % approx.65 vac/approx.66 vdc 2.65 maac/3 madc 390 mva/350 mw 5?8 vdc 50 ma ac: 5 hz/dc: 20 hz 17.4 ms 27.4 ms <1.6 v 300 v 6 kv iv 2 5.5 mm -25 ??40 ? -25 ??50 ? - 40 ??85 ? awg 22..12 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 page 305 ordering data for ts 32 y for ts 35 w with combination foot ts 32/ts 35 technical data input voltage switch-on voltage input current max. input power output voltage max. output current min. output current max. switching frequency; switching ratio 1: 2 switch-on delay switch-off delay voltage drop at max. load insulation coordination to en 50 178 rated voltage rated impulse voltage overvoltage category pollution severity clearances and creepage distances operating temperature without clearances with clearances storage temperature conductor conductor cross-section overall width accessories end plate further accessories, dimensions and connection data opto-coupler in component housing mini coupler dk dko dk5 24 vdc dko 115 vac/dc dko 230 vac/dc schematic circuit diagram switching ratio switching ratio opto-couplers dko 120 ordering data for ts 32 y for ts 35 w with combination foot ts 32 / ts 35 technical data input voltage input current input nominal power total power loss making threshold input reverse voltage output voltage output current voltage drop at max. load feature of output circuit indication dielectric strength input/output dielectric strength to mounting rail clearances and creepage distances operating temperature storage temperature conductor conductor cross-section overall width accessories end plate type cat. no. dko 35 48 vdc 8151230000 48 vdc ?0 % 3.7 ma ?0 % 178 mw 400 mw approx.32 vdc max. 1 kv 5?8 vdc max. 20 ma 1.6 v disconnection plug led red 3.75 kv eff / 5.3 kvdc 4 kv eff >5 mm -25 ??50 ? -40 ??60 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 opto-coupler in component housing mini coupler dk dko 35 48 vdc dko 35 60 vdc dko 35 125 vdc type cat. no. dko 35 60 vdc 8067100000 60 vdc ?0 % 5.6 ma ?0 % 340 mw 420 mw approx.42 vdc / 5.3 ma max. 1 kv 5?8 vdc max. 100 ma 0.8 v led green 3.75 kv eff / 5.3 kvdc 4 kv eff >4 mm -25 ??50 ? -40 ??60 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 type cat. no. dko 35 125 vdc 8131660000 125 vdc ?0 % 1.7 ma ?0 % 215 mw 400 mw approx.80 vdc max. 1 kv 5?8 vdc max. 20 ma 1.6 v disconnection plug led red 3.75 kv eff / 5.3 kvdc 4 kv eff >5 mm -25 ??50 ? -40 ??60 ? awg 22?2 0.5? mm 2 6 mm type cat. no. ap dkt4 0687560000 w schematic circuit diagram opto-couplers dko 121 digital signal processing ordering data for ts 32 y for ts 35 w with combination foot ts 32 / ts 35 technical data input input voltage input current pulse generator output output voltage output current voltage proof input-output/mounting rail insulation coordination to din vde 0160, draft 11/94 rated voltage rated impulse voltage overvoltage category pollution severity clearances and creepage distances operating temperature without clearances with clearances storage temperature conductor conductor cross-section overall width accessories end plate type cat. no. dko dk4 s0 8467030000 dko dk4 s0 8100180000 24 vdc ?0 % 13 ma specification acc. to din 43864 (current interface for connection to pulse generator acc. to din 43864) 5?8 vdc max. 100 ma 4 kv eff 300 v 6 kv iv 2 5.5 mm -25 ??40 ? -25 ??50 ? -40 ??60 ? awg 22?2 0.5? mm 2 12 mm type cat. no. ap dkt4 0687560000 opto-couplers dko s0 signal sensor dko switching amplifiers/opto-couplers for namur initiators dko dk4 s0 dko application example: signals for consumers are normally transferred via an interface. generally, this interface must conform with din 43867 (interface for signal transmission). there must be a differentiation between the passive interface and active s0 interface. the actual signals, that are corres- pondingly proportional to the relevant con- sumption (electrical energy, gas consumption, water, district heating, etc.) are shown at measuring sensors (electric meter, etc.) the interface itself is purely passive (acceptor) and must be supplied via a source. the source for providing the current is built into the active interface. the following threshold values are specified: i max = 27 madc u max = 27 vdc f max = 16.66 hz for the recognition of the corresponding con- sumption signals, the following currents are integrated: on (active) -> 10?7 ma off (inactive) -> 0? ma the module accepts the input from the signal sensor and outputs the opto-decoupled output signal, i. e. galvanically isolated. type cat. no. dko 8164250000 24 vdc ?0 % 35 ma up to 1 kv available 300 hz f. pulse duty factor 1:1 approx.45 ? approx.450 ? approx.18 v ca 15 v < 5 ma 300 hz f. pulse duty factor 1:1 approx.20? approx.400 ? 5?0 vdc max. 100 ma max. 3 w max. 1 v free-wheel. diode btwn. a+?- 4 kv eff -25 ??40 ? -25 ??50 ? -40 ??60 ? awg 22?2 0.5? mm 2 12 mm type cat. no. ap dkt4 0687560000 ordering data for ts 32 y for ts 35 w with combination foot ts 32 / ts 35 technical data input input voltage input current reverse polarity protection namur-input (n+ and n-) switching frequency switch-on delay switch-off delay input (e+ and 0) switch-on point switch off-point current consumption max. switching frequency switch-on delay switch-off delay output (a+ and a-) output voltage output current switching capacity internal voltage drop protective measure voltage proof input-output/mounting rail operating temperature without clearances with clearances storage temperature conductor conductor cross-section overall width accessories end plate w schematic circuit diagram schematic circuit diagram opto-coupler in component housing mini coupler dk type cat. no. ego 1, 5 v 0266160000 3? v 2 ) 9?5 mw 5?8 v 1 ) <1 v 20 ma 0.2 a/10 ms 0.16 ma 12 ? 180 ? 100 hz 1 : 2 ?0 ??60 ? ?5 ??60 ? ?5 ??60 ? iii 2 page 306, fig. i type cat. no. ego 1, 12 v 8011250000 3) 3?2 v 30?80 mw 5?8 v 1 ) <1 v 20 ma 0.2 a/10 ms 0.16 ma 22 ? 44 ? 5000 hz/5000 hz 1 : 2/1 : 4 50 ? ?0 ??85 ? ?5 ??60 ? ?5 ??60 ? iii 2 page 306, fig. i type cat. no. ego 1, 12 v 0114260000 12 v 0 , ?0 % 0.35 w 0.45 va 5?8 v 1 ) <1.6 v 100 ma 0.8 a/10 ms 0.16 ma 6 ms 13 ms 20 hz <10 hz 1 : 2 ?0 ??85 ? ?5 ??60 ? ?5 ??60 ? iii 2 page 306, fig. i type cat. no. ego 1, 24 v 0558160000 24 v? ?0 % 0.6 w 5?8 v 1 ) <1 v 20 ma 0.2 a/10 ms 0.16 ma 30 ? 100 ? 3000 hz 1 : 2 ?0 ??85 ? ?5 ??60 ? ?5 ??60 ? iii 2 page 306, fig. i ordering data rated data input voltage rated consumption ?(w) rated consumption ~ (va) output supply voltage voltage drop at max. load current output current derating curve a = mounted on rail without clearance b = mounted on rail without clearance 20 mm continuous current ambient temperature impulse loading, max. current (not periodic) max. reverse current (quiescent current) at u = 48 v switch-on time (cyclic operation) switching-off time (cyclic operation) max. switching frequency, dc max. switching frequency, ac switching ratio min. input impulse width storage temperature ambient temperature ? rowed on mounting rail without clearances ? rowed with clearances 20 mm insulation coordination to en 50 178 overvoltage category pollution severity accessories, dimensions and connection data see 122 schematic circuit diagram ego 1 5 v for low voltage alternatively positive or negative switching ego 1 5 v ego 1 12 v ego 1 24 v opto-coupler in component housing eg t 1 = t 2 * wiring option switching ratio switching ratio t 1 = 1 = 1 : 2 t 3 2 1 ) not ttl-compatible 3 ) at ue 5 v, the led only lights weakly or not at all. 2 ) conditionally level-compatible output switching function is not affected. opto-couplers ego type cat. no. ego 2, 115 v 0 0131860000 117 v 0 , ?0 % 0.8 w 0.9 va 5?8 v <1.6 v 100 ma 0.8 a/10 ms 0.16 ma 5 ms 22 ms 20 hz < 10 hz 1 : 2 ?0 ??85 ? ?5 ??40 ? ?5 ??50 ? iii 2 page 306, fig. i type cat. no. ego 2, 230 v 0 0546360000 230 v 0 , +5 %-15 % 1.2 w 1.4 va 5?8 v <1.6 v 100 ma 0.8 a/10 ms 0.16 ma 13 ms 10 ms 20 hz < 10 hz 1 : 2 ?0 ??85 ? ?5 ??40 ? ?5 ??50 ? iii 2 page 306, fig. i type cat. no. ego 1, 24 v 0609860000 24 v 0 , ?0 % 0.5 w 0.6 va 5?8 v 1 ) <1.6 v 100 ma 0.8 a/10 ms 0.16 ma 2 ms 15 ms 20 hz <10 hz 1 : 2 ?0 ??85 ? ?5 ??60 ? ?5 ??60 ? iii 2 page 306, fig. i 123 digital signal processing ego 2 115 v 0 for low voltage ego 2 230 v 0 in the case of inductive or capacitive electrical noise, it is recommended to connect an rc network (dk 4 rc) upstream or to use ego 3 . ego 1 24 v opto-coupler in component housing eg * wiring option 124 type cat. no. wos 1 15-60 vdc 8237730000 woz 1 8430090000 15 vdc...60 vdc 1) 1.4 ma at 15 v 2.5 ma at 24 v 4.1 ma at 48 v ...60 v ca.12 v approx.9 v 1 khz 90 us 250 us led green in output short-circuit protection 10 m a...0.6 a max. 500 ma 12 vdc.. .24 vdc ...28 vdc typ. 0.7 a ... 1.8 a min.0.7 a; max. 2.4 a 0.5 v at 500 ma polarity protection, varistor 12 vdc... 24 vdc ...28 vdc yes / max. 96 h -25 ?...+60 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 wos 1 15-60 vdc schematic circuit diagram type cat. no. wos 1 5 vdc 8275430000 woz 1 8430030000 4.0 vdc... 5 vdc ...6.0 vdc 7.5 ma at 4.0 v 13.5 ma at 5.0 v 19.0 ma at 6.0 v approx.2.2 v approx.2.0 v 100 hz 100 us 1 ms led green in input negative switching max. 2 a * 18 vdc... 24 vdc ...30 vdc 300 mv varistor no -25 ?...+50 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 type cat. no. wos 1 3.5-15 vdc 8275390000 woz 1 8430040000 3.5 vdc...15 vdc 10.5 ma at 3.5.0 v 12.5 ma at 5.0 v 25.0 ma at 15 v approx.2.5 v approx.1.5 v 5 khz 8 us 35 us led green in input max. 100 ma 5 vdc...48 vdc 1.5 v at 100 ma varistor, integr. free-wh. diode no -25 ?...+60 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 type cat. no. wos 1 12 vuc 8275500000 woz 1 8429990000 10 vdc... 12 vdc ...14 vdc 15.3 ma ac at 12 v 12.4 ma dc at 12 v approx.8 v approx.7 v 10 ms ac and 4 ms dc 20 ms ac and 18 ms dc led green in output short-circuit protection 10 ma...0.6 a max. 500 ma 12 vdc... 24 vdc ...28 vdc typ. 0.7 a ... 1.8 a min. 0.7 a; max. 2.4 a 0.5 v, at 500 ma polarity protection, varistor 12vdc... 24vdc ...28vdc yes / max. 96 h -25 ?...+60 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 wos 1 5 vdc negative switching wos 1 3.5-15 vdc wos 1 12 vuc ordering data screw connection tension clamp connection input input voltage input current making threshold breaking threshold input frequency switch-on delay switch-off delay status indicator output output current range nominal output current output voltage response threshold residual voltage protection circuit voltage supply short-circuit in output temperature operating temperature** storage temperature mechanical data overall width housing material approvals reliable separation according to en 50 178 coordination of insulation according to en 50 178 opto-coupler according to vde 0884 rated voltage rated impulse voltage overvoltage category pollution severity clearance/creepage path accessories, dimensions and connection data see * at ambient temperature 20 ?/horizontal installation opto-coupler in component housing waveseries 1) caution: cross-connections may only be used for voltages 50 vdc (extra-low voltage). opto-couplers waveseries opto-coupler in wavebox: independent connection technology - pluggable connection unit optionally available with screw or tension clamp connection technology fast commissioning and after-sales service - pluggable replacement pcbs save wiring - cross-connection option at input / output fast switching - high frequency output, up to 100 khz reliable power output - short-circuit and overload proof space-saving components - 4-channel opto-couplers 125 digital signal processing type cat. no. wos 1 230 vuc 8275380000 woz 1 8430050000 230 v, max. 250 vuc 11.5 ma ac at 230 v 1.8 ma dc at 230 v ca.170 v ac and 140 v dc ca.130 v ac and 135 v dc - 25 ms ac 15 ms dc 25 ms ac 20 ms dc led green in output short-circuit protection 10 ma...0.6 a max. 500 ma 12 vdc... 24 vdc ...28 vdc typ. 0.7 a ... 1.8 a min.0.7 a; max. 2.4 a 0.5 v at 500 ma polarity protection, varistor 12 vdc... 24 vdc ...28 vdc yes / max. 96 h -25 ?...+60 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 type cat. no. wos 1 115 vuc 8235180000 woz 1 8430100000 115 vuc, max. 130 vuc 3.1 ma ac at 115 v 2.9 ma dc at 115 v ca.75 v ac and 71 dc ca.70 vuc - 10 ms ac 10 ms dc 15 ms ac 15 ms dc led green in output short-circuit protection 10 m a...0.6 a max. 500 ma 12 vdc... 24 vdc ...28 vdc typ. 0.7 a ... 1.8 a min.0.7 a; max. 2.4 a 0.5 v at 500 ma polarity protection, varistor 12 vdc... 24 vdc ...28 vdc yes / max. 96 h -25 ?...+60 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 wos 1 115 vuc wos 1 230 vuc schematic circuit diagram ordering data screw connection tension clamp connection input input voltage input current making threshold breaking threshold input frequency switch-on delay switch-off delay status indicator output output current range nominal output current output voltage response threshold residual voltage protection circuit voltage supply short-circuit in output temperature operating temperature** storage temperature mechanical data overall width housing material approvals reliable separation according to en 50 178 coordination of insulation according to en 50 178 opto-coupler according to vde 0884 rated voltage rated impulse voltage overvoltage category pollution severity clearance/creepage path accessories, dimensions and connection data see * at ambient temperature 20 ?/horizontal installation opto-coupler in component housing waveseries opto-couplers waveseries wos 1 230 vuc waagerecht montiert; ansteuerung : 253vac 0 0,1 0,2 0,3 0,4 0,5 0,6 0204 06080100 umgebungstemperatur [ c] a bstand>=10mm wos 1 230 vuc ?8275380000 output current [a] mounted horizontally control 253 vdc ambient temperature [?] mounted clearance 10 mm 126 type cat. no. wos 2 24 vuc 8275190000 woz 2 8430080000 21.6 v... 24 v ...26.4 v 16.3 ma ac at 24 v 13.5 ma dc at 24 v ca.16 v ca.11 v 8 ms ac 7ms dc 25 ms ac 25 ms dc led green in output led red in output * 1) min. 2 ma...max. 1.5 a at tb 25 ?...150 ? min. 2 ma...max. 1.9 a at tb -40 ?...25 ? tb: temperature in module direct at output driver bts442 short-circuit protection 5 adc * approx.15 ma at 28.8 v 19.2 vdc... 24 vdc ...28.8 vdc max. 400 mv polarity protection, varistor yes / max. 96 h -25 ?...+50 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 type cat. no. wos 2 115 vuc 8296250000 woz 2 8429980000 115 v, max. 130 vuc 3.1 ma ac at 115 v 2.8 ma dc at 115 v ca.70 v ca.55 v 10 ms ac 15 ms dc 30 ms ac 30 ms dc led green in output led red in output * 1) min. 2 ma...max. 1.5 a at tb 25 ?...150 ? min. 2 ma...max. 1.9 a at tb -40 ?...25 ? tb: temperature in module direct at output driver bts442 short-circuit protection 5 adc * approx.15 ma at 28.8 v 19.2 vdc... 24 vdc ...28.8 vdc max. 400 mv polarity protection, varistor yes / max. 96 h -25 ?...+50 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 type cat. no. wos 2 230 vuc 8275220000 woz 2 8430060000 230 v, max. 250 vuc 12.0 ma ac at 230 v 1.8 ma dc at 230 v ca.140 v ca.100 v ca.100 v ca.120 v 10 ms ac 15 ms dc 30 ms ac 30 ms dc led green in output led red in output * 1) min. 2 ma...max. 1.5 a at tb 25 ?...150 ? min. 2 ma...max. 1.9 a at tb -40 ?...25 ? tb: temperature in module direct at output driver bts442 short-circuit protection 5 adc * approx.15 ma at 28.8 v 19.2 vdc... 24 vdc ...28.8 vdc max. 400 mv polarity protection, varistor yes / max. 96 h -25 ?...+50 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 wos 2 24 vuc wos 2 115 vuc wos 2 230 vuc opto-couplers waveseries with power output (short-circuit proof and overload proof) ordering data screw connection tension clamp connection input input voltage input current making threshold breaking threshold switch-on delay switch-off delay status indicator normal operation status indicator short-circuit, underload, overload underload output output current closed supply-circuit current (output not switched) voltage supply residual voltage protection circuit short-circuit in output temperature operating temperature** storage temperature mechanical data overall width housing material approvals reliable separation according to en 50 178 coordination of insulation according to en 50 178 opto-coupler according to vde 0884 rated voltage rated impulse voltage overvoltage category pollution severity clearance/creepage path accessories, dimensions and connection data see *a t ambient temperature 20 ?/horizontal installation * 1) led red : hard short-circuit, led permanently lit. the output is switched off and does not reset itself. to reset, the output or input must be temporarily disconnected from the supply voltage or input signal. overload: led cycles, rate: approx. 2 sec. on, approx. 30 sec. off. module resets itself after the overload is removed. underload: led permanently lit. when an underload reco- gnised, both leds are lit. the output is switched through schematic circuit diagram opto-coupler in component housing waveseries wos 2 230 vuc waagerecht montiert; ansteuerung : 253vac 0 1 2 3 4 5 6 01020304 0506070 umgebungstemperatur [ c] a bstand>=10mm wos 2 230 vuc ?8275220000 output current [a] ambient temperature [?] mounted clearance 10 mm mounted horizontally control 253 vdc 127 digital signal processing type cat. no. wos 2 15-60 vuc 8275440000 woz 2 8430010000 15 vuc...60 vac/66 vdc 3.3 ma ac at 15 v 3.8 ma dc at 15 v 4.0 ma ac at 24 v 4.6 ma dc at 24 v 5.3 ma ac at 60 v 5.6 ma dc at 60 v approx.11 v dc approx.15 v ac approx.5 v dc approx.14 v ac max. 20 ms max. 20 ms led green in input ac voltage output max. 230 v/3.5 a ac * 2 ma 24 vac...250vac (50hz-60hz) max. 1.6 v rc-combination with varistor -25 ?...+50 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 type cat. no. wos 2 115 vuc 8259950000 woz 2 8430160000 115 vuc max. 130 vuc 7.2 ma ac at 115 v 3.8 ma dc at 115 v approx.90 v dc approx.90 v ac approx.70 v dc approx.70 v ac max. 20 ms max. 20 ms led green in input ac voltage output max. 230 v/3.5 a ac * 2 ma 24vac...250 vac (50hz-60hz) max. 1.6 v rc-combination with varistor -25 ?...+50 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 type cat. no. wos 2 230 vuc 8275400000 woz 2 8430150000 230 vuc max. 250 vuc 11.8 ma ac at 230 v 3.3 ma dc at 230 v approx.180 v dc approx.200 v ac approx.150 v dc approx.140 v ac max. 25 ms max. 25 ms led green in input ac voltage output max. 230v/3.5a ac * 2 ma 24 vac..250 vac (50hz-60hz) max. 1.6 v rc-combination with varistor -25 ?...+50 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 wos 2 15-60 vuc wos 2 115 vuc wos 2 230 vuc opto-coupler waveseries with ac voltage output and zero voltage switch ordering data screw connection tension clamp connection input input voltage input current making threshold breaking threshold switch-on delay switch-off delay status indicator normal operation output output current closed supply-circuit current (output not switched) voltage supply residual voltage protection circuit short-circuit in output temperature operating temperature ** storage temperature mechanical data overall width housing material approvals reliable separation according to en 50 178 coordination of insulation according to en 50 178 opto-coupler according to vde 0884 rated voltage rated impulse voltage overvoltage category pollution severity clearance/creepage path accessories, dimensions and connection data see *a t ambient temperature 20 ?/horizontal installation zero v. switch zero v. switch zero v. switch opto-coupler in component housing waveseries schematic circuit diagram wos 2 15-60 vuc waagerecht montiert; ansteuerung : 60vac 0 0,5 1 1,5 2 2,5 3 3,5 02040608 0 100 120 umgebungstemperatur [ c] a bstand>=10mm wos 2 15-60 vuc ?8275440000 output current [a] mounted horizontally control 253 vdc ambient temperature [?] mounted clearance 10 mm 128 type cat. no. wos 2 24 vuc 8237720000 woz 2 8430110000 18 vuc ... 30 vuc 2.8 ma ac at 24 v 3.7 ma dc at 24 v ca.13 v dc ca.14 v ac ca.10 v dc ca.13 v ac 20 ms ac 7.0 ms dc 46 ms ac 50 ms dc led green in output led red in output * short-circuit protection max. 500 ma per channel max. 2 a 12 vdc... 24 vdc ...28 vdc typ. 0.9 a min. 0.65 a, max. 1.2 a, r l 2 ? 0.65 v, at 500 ma polarity protection, varistor 100 % max. 3 w -25 ?...+50 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 150 v 2.5 kv iii 2 3 mm page 298 + 308 type cat. no. wos 2 115 vuc 8275360000 woz 2 8430130000 115 vuc, max. 130 vuc 1.4 ma ac at 115 v 2.0 ma dc at 115 v ca.60 v dc ca.60 v ac ca.50 v dc ca.50 v ac 40 ms ac 15 ms dc 60 ms ac 70 ms dc led green in output led red in output * short-circuit protection max. 500 ma per channel max. 2 a 12 vdc... 24 vdc ...28 vdc typ. 0.9 a min. 0.65 a, max. 1.2 a, r l 2 ? 0.65 v, at 500 ma polarity protection, varistor 100 % max. 3 w -25 ?...+50 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 150 v 2.5 kv iii 2 3 mm page 298 + 308 type cat. no. wos 2 230 vuc 827534 0000 woz 2 8430140000 230 v, max. 250 v 1.4 ma ac at 230 v 2.0 ma dc at 230 v ca.150 v dc ca.120 v ac ca.110 v dc ca.110 v ac 40 ms ac 14 ms dc 95 ms ac 140 ms dc led green in output led red in output * * led red, one led for all channels short-circuit protection max. 500 ma per channel max. 2 a 12 vdc... 24 vdc ...28 vdc typ. 0.9 a min. 0.65 a, max. 1.2 a, r l 2 ? 0.65 v, at 500 ma polarity protection, varistor 100 % max. 3 w -25 ?...+50 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 wos 2 24 vuc wos 2 115 vuc wos 2 230 vuc ordering data screw connection tension clamp connection input input voltage input current making threshold breaking threshold switch-on delay switch-off delay status indicator normal operation status indicator short-circuit, underload, overload output 1) output current output total current voltage supply response threshold residual voltage protection circuit synchronisation factor lamp load temperature operating temperature storage temperature mechanical data overall width housing material approvals reliable separation according to en 50 178 coordination of insulation according to en 50 178 opto-coupler according to vde 0884 rated voltage rated impulse voltage overvoltage category pollution severity clearance/creepage path accessories, dimensions and connection data see 1) protection circuit for output load necessary, page 107 opto-coupler waveseries (4-channel, short-circuit proof) opto-coupler in component housing waveseries schematic circuit diagram wos 2 230 vuc waagerecht montiert ausgangsstrom/kanal: 500ma; ansteuerung : 250vac 0 0,1 0,2 0,3 0,4 0,5 0,6 010203 0405060 umgebungstemperatur [ c] a bstand>=10mm wos 2 230 vuc ?8275340000 output current [a] mounted horizontally, output current / channel: 500 ma control 250 vdc ambient temperature [?] mounted clearance 10 mm 129 digital signal processing type cat. no. wos 1 5 vttl 50 khz 8275210000 woz 2 8430070000 5 vttl 11.8 ma at 4.75 v 13.6 ma at 5 vdc 15.5 ma at 5.25 vdc 4.75 vdc ?5.25 vdc 110 k ? 50 khz at r load = 470 ? 1 ? 7 ? led green in input circuit 21.6 vdc... 24 vdc ...26.4 vdc approx.5.4 ma, output not switched 50 ma 1.5 v at 50 ma polarity protection, varistor -25 ?...+60 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 type cat. no. wos 1 12-28 vdc/100 khz 8275450000 woz 2 8430000000 12v dc...28 vdc 5.5 ma at 12 vdc 7.9 ma at 24 vdc 8.8 ma at 28 vdc approx.5 v dc approx.4 v dc 100 khz at r load = 470 ? 1 ? 3 ? led green in input circuit 21.6 vdc... 24 vdc ...26.4 vdc approx.5.4 ma, output not switched 50 ma 1.5 v at 50 ma polarity protection, varistor -25 ?...+60 ? rowed -40 ?...+85 ? 22.5 mm polyamide pa 66 ul/csa 300 v 4 kv iii 2 5.5 mm page 298 + 308 wos 1 5 vttl 50 khz wos 1 12-28 vdc 100 khz opto-coupler waveseries with high switching frequency ordering data screw connection tension clamp connection input input voltage input current supply voltage input resistance making threshold breaking threshold input frequency switch-on delay switch-off delay status indicator normal operation output voltage supply supply nominal current output current residual voltage protection circuit temperature operating temperature storage temperature mechanical data overall width housing material approvals reliable separation according to en 50 178 coordination of insulation according to en 50 178 opto-coupler according to vde 0884 rated voltage rated impulse voltage overvoltage category pollution severity clearance/creepage path accessories, dimensions and connection data see opto-coupler in component housing waveseries schematic circuit diagram wos 1 5v ttl 50 khz waagerecht montiert ansteuerung : 5,25v; qv-strom: 4a eng angereihte montage 0 0,01 0,02 0,03 0,04 0,05 0,06 020406 080 100 umgebungstemperatur [ c] a bstand>=10mm wos 1 5 vttl 50 khz ?8275210000 output current [a] mounted horizontally control: 5.25 v; cross-connection current: 4 a mounted in rows ambient temperature [?] mounted clearance 10 mm 130 schematic circuit diagram ordering data rated data input input voltage input current (at u n ) rated input consumption max. input frequency dc typ. switch-on delay typ. switch-off delay max. input frequency ac output supply voltage max. output current reverse polarity protection short-circuit conditions thermal short-circuit load indication li 1, li 2 supply voltage max. current max. voltage drop storage temperature ambient temperature - rowed on mounting rail without clearances - rowed with clearances insulation coordination en 50 178 overvoltage category pollution severity accessories, dimensions and connection data see type cat. no. ego 5 pkr 8220870000 screw connection 0.5? mm 2 24 vac/dc, min 20 vac/dc, max 30 vac/dc 12 ma (24 vdc) 13 ma (24 vac) 195 mw, 220 mva 30 hz, switching ratio 1 : 2 2 ms 7 ms 10 hz screw connection 0.5? mm 2 20?0 vdc 4 a present short-circuit-protected (switches output off immediately; auto switch-on when short-circuit eliminated) 12 a. output switches off and on again automatically after certain time. 5?8 vdc 100 ma 1.6 v ?0 ??60 ? ?0 ??40 ? ?0 ??50 ? iv 2 page 307, fig. vii ego 5 pkr 24 vac/dc power opto-couplers with "online" check-back indication of the load ratio ?power opto-couplers for load currents up to 4 a. ?short-circuit proof ?patented "online" load indication and check-back indication - optical indication status indication via 3-coloured leds - electrical indication 2-bit "online" data signal for check-back indication of the load performance to a plc or similar ?module fulfils protective separation in accordance with vde 0106 part 101 and en 50 178 (rated voltage 300 v) ?internal opto-coupler according to with din vde 0884 ?insulation voltage 4 kv eff ?clearance and creepage distances 8 mm indication and check-back indication of load ratio input load indication li 1 li 2 led output low x x x l l off low high normal l h green high high error 1 )hl red low high open load 2 )h h yellow high 2 ) open load: underload recognition at active input: type 500 ma (max. 1.5 a) at 25 ?. open load wil be indicated at i load 500 ma depending on switching status. 1 ) error: short-circuit, overload, over- or under voltage at out- put, overtemperature in the module opto-coupler in component housing eg5 131 digital signal processing type cat. no. ost eg7 4 a 8281720000 rs eg7 8193830000 cat. no. lugs for socket rs eg7 8193830000 21.6 vdc 24 vdc 26.4 vdc 10.5 ma 11.2 ma 12.0 ma 230 mw 270 mw 320 mw 21.6 v 2 v led green present typ. 10 ? typ. 45 ? 100 hz (resistive load/4 a/ switching ratio 1 : 2) 21.6?6.4 vdc 4 a 0.2 v, not short-circuit proof and not overload proof output set normal function - 25? 60 ? 0? 40 ? 0? 50 ? - iii 2 page 304 type cat. no. ost eg7 2 a 8269050000 rs eg7 8193830000 cat. no. lugs for socket rs eg7 8193830000 24 vac/dc 20 % dc: 5.5 ma ac: 6 ma dc: 132 mw ac: 145 mw 19.2 v 2.4 v led green, yellow, red - 12 ms 17 ms 100 hz (resistive load/2 a/ switching ratio 1 : 2) 24 vdc 30 % 2 a 0.2 v, short-circuit proof and overload proof output set normal function, 500 ma...2 a output set, no activity, < 500 ma output set, short-circuit output not set - 25? 60 ? 0? 40 ? 0? 50 ? according to din vde 0884 iii 2 page 304 ordering data puggable opto-coupler, without socket socket for pluggable opto-coupler with combin. foot ts 32, 35 rated data conductor connection input voltage input current input power relaibly switched on reliably switched off status indicator reverse polarity protection switch-on delay switch-off delay max. switching frequency output supply voltage switching current voltage drop at max. load current status indicator: green led yellow led red led led off storage temperature operating temperature - rowed on mounting rail without clearances - rowed with clearances insulation coordination to en 50 178 reliable separation overvoltage category pollution severity accessories, dimensions and connection data see schematic circuit diagram power opto-couplers ?pluggable on socket rs eg 7 with combination foot ts 32, 35 ?overall width 10 mm ?short circuit protected and over load-safe output ?3-colour status-led for output current indica- tion ?reliable separation acc. to din vde 0884 ost eg7 2 a ost eg7 4 a opto-coupler in component housing eg7 ost eg 7 rs eg 7 ost eg 7 rs eg 7 132 ordering data combination foot for ts 15, ts 32, ts 35 plug-in opto-coupler, without engagement socket engage. socket for opto-coupler with combin. foot ts 32, 35 rated data input voltage switch-on current making threshold,typical rated input current dc rated input current ac rated input consumption output supply voltage output current max. output current switch-on time (first time) switch-off time switching frequency storage temperature ambient temperature connection insulation coordination to en 50 178 protective separation clearances and creepage distances rated impulse voltage overvoltage category pollution severity accessories cross connection comb 16-pole further accesories, dimensions and connection data see schematic circuit diagram type cat. no. ego eg7 8092490000 ost eg7 8234560000 rs eg7 8193830000 5 v??0 % 3 v 6.8 ma 5?8 v 100 ma 300 ma 6 ms for u n = 5 v 12 ms for u n = 5 v 15 hzdc ?0?60 ? ?5?60 ? acc. to din vde 0884 5.5 mm 6 kv iii 2 type cat. no. qb 16/10.16 1650330000 page 304 type cat. no. ego eg7 8092510000 ost eg7 8234570000 rs eg7 8193830000 12 v 0 ?0 % 12 v/4.5 ma for max. 10 ms 6.5 v 7.5 v~ 3 ma 33.5 ma 40 mw/50 mva 5?8 v 100 ma 300 ma 6 ms for u n = 12 v 12 ms for u n = 12 v 15 hzdc ?0?60 ? ?5?60 ? acc. to din vde 0884 5.5 mm 6 kv iii 2 type cat. no. qb 16/10.16 1650330000 page 304 type best.-ego ego eg7 8092530000 ost eg7 8234580000 rs eg7 8193830000 24 v 0 ?0 % 12 v/4.5 ma for max. 10 ms 15.5 v 16.5 v~ 2.8 ma 3.4 ma 70 mw/90 mva 5?8 v 100 ma 300 ma 5 ms for u n = 24 v 15 ms for u n = 24 v 15 hzdc ?0?60 ? ?5?60 ? acc. to din vde 0884 5.5 mm 6 kv iii 2 type cat. no. qb 16/10.16 1650330000 page 304 type cat. no. ego eg7 8092550000 ost eg7 8234590000 rs eg7 8193830000 48 v 0 ?0 % 12 v/4.5 ma for max. 10 ms 31.5 v 45 v~ 2.8 ma 3.2 ma 135 mw/155 mva 5?8 v 100 ma 300 ma 5 ms for u n = 48 v 15 ms for u n = 48 v 15 hzdc ?0?60 ? ?5?60 ? acc. to din vde 0884 5.5 mm 6 kv iii 2 type cat. no. qb 16/10.16 1650330000 page 304 opto-couplers ?with combination foot for ts 15, ts 32 or ts 35 ?pluggable on socket rs eg 7 with combination foot ts 32, 35 ?overall width 10 mm ? reliable separation according to din vde 0884 5 v 12 v 0 24 v 0 48 v 0 ego eg 7 ost eg 7 rs eg 7 ost eg 7 rs eg 7 ego eg 7 opto-coupler in component housing eg7 133 digital signal processing type cat. no. ego eg7 8092570000 ost eg7 8234600000 rs eg7 8193830000 115 v 0 ?0 % 115 v/90 ma for 5 ms 70 v 72 v~ 3.3 ma 5.5 ma 400 mw/500 mva 5?8 v 100 ma 300 ma 5 ms for u n = 115 v 18 ms for u n = 115 v 15 hzdc ?0?60 ? ?5?60 ? acc. to din vde 0884 5.5 mm 6 kv iii 2 type cat. no. qb 16/10.16 1650330000 page 304 type cat. no. ego eg7 8092590000 ost eg7 8234610000 rs eg7 8193830000 230 v~ ?0 % 230 v/110 ma for 2 ms 140 v~ 3.8 ma 836 mva 5?8 v 100 ma 300 ma 5 ms for u n = 230 v 18 ms for u n = 230 v 12 hz ?0?60 ? ?5?60 ? acc. to din vde 0884 5.5 mm 6 kv iii 2 type cat. no. qb 16/10.16 1650330000 page 304 type cat. no. ost eg7 8621190000 230 vdc ?0 % 230 v~ /110 ma for 2 ms 140 v~ (for testing only) 1.8 ma 100 ma 300 ma ?0?60 ? ?5?60 ? screw connection 0.5?.5mm 2 , awg 22?6 acc. to din vde 0884 5.5 mm 6 kv iii 2 type cat. no. qb 16/10.16 1650330000 page 304 ordering data combination foot for ts 15, ts 32, ts 35 pluggable opto-coupler, without locking socket locking socket for pluggable opto-coupler with combin. foot ts 32, 35 rated data input voltage switch-on current making threshold,typ, rated input current dc rated input current ac rated input consumption output supply voltage output current max. output current switch-on time (first time) switch-off time switching frequency storage temperature ambient temperature insulation coordination to reliable separation clearances / creepage distances rated impulse voltage overvoltage category pollution severity accessories cross connec. comb 16-pole futher accessories, dimensions and connection data see schematic circuit diagram opto-couplers for long control cables ?with combination foot for ts 15, ts 32 or ts 35 ?plugs onto locking socket rs eg 7 with combination ts 32, 35 ?overall width 10 mm ? protective separation acc. to din vde 0884 ?rc-input for suppressing noise signals ?reliable switching perfor- mance by interference on the control side 115 v 0 230 v 9 230 vdc 115 v 0 230 v 9 type cat. no. ego eg7 8397420000 ost eg7 8315590000 rs eg7 8193830000 115 v 0 ?0 % 115 v/90 ma for 5 ms 70 v 72 v~ 3.3 ma 9 ma/90 ma (5 ms) 400 mw/500 mva 5?8 v 100 ma 300 ma 9 ms for u n = 115 v 25 ms for u n = 115 v 12 hzdc ?0?60 ? ?5?60 ? en 50 178 acc. to din vde 0884 5.5 mm 6 kv iii 2 type cat. no. qb 16/10.16 1650330000 page 304 type cat. no. ego eg7 8387580000 ost eg7 8394990000 rs eg7 8193830000 230 v~ ?0 % 230 v/110 ma for 2 ms 140 v~ 14 ma/110 ma (2 ms) 836 mva 5?8 v 100 ma 300 ma 15 ms for u n = 230 v 15 ms for u n = 230 v 12 hz ?0?60 ? ?5?60 ? acc. to din vde 0884 5.5 mm 6 kv iii 2 type cat. no. qb 16/10.16 1650330000 page 304 ego eg 7 ost eg 7 rc rs eg 7 rc ego eg 7 ego eg 7 rc/ ost eg 7 rc opto-coupler in component housing eg7 accessories ssr standard complete module 29 5,1 12,7 25,4 dimensions 134 compact dimensions (29 x 25.4 x 12.7) combines with plugseries socket pxs / pxz, led indicator pled and prc holding clamp to a complete functioning unit. fully compatible with electromechanical relays in standard design control voltage 24 vac / dc rated switching current 24 vdc, 24 vac/dc, or 230 vac up to 5 a continuous current mounts onto pcb or socket high mounting density possible ordering data technical data input (typical values at 20 ?) input voltage min. ac/dc input voltage max. ac/dc input current min. ac/dc input current max. ac/dc drop-out voltage ac/dc resistance output max. switching current dc max. switching current ac min. switching current dc min. switching current ac rated switching voltage dc rated switching voltage ac switch voltage range dc switch voltage range ac max. forward anode voltage at max. switching current dc max. forward anode voltage at max. switching current ac max. switch-on time dc max. switch-on time ac (50 hz) max. switch-off time dc max. switch-off time ac (50 hz) insulation test voltage control circuit - switching circuit dc test voltage control circuit - switching circuit ac further data operating temperature range weight approvals celduc further accessories, dimensions and connection data type cat. no. ssr 24 vuc/24vdc 5a 8576350000 dc version 15 v 30 v 6.1 ma 12 ma 2.5 v 2.100 ? 5 a 1 ma 24 v 0...30 v 0.3 v 2 ms 18 ms 2.5 kv eff -40 ??50 ? approx.18 g cul, ul recognized spd07505 see page 83 type cat. no. ssr 24 vuc/230vac 4a 8576360000 ac version 15 v 30 v 6.1 ma 12 ma 2.5 v 2.100 ? 3 a (4 a at 20 ?) 50 ma 230 v ~ 12...275 v 1.1 v 12 ms 20 ms 4 kv eff -40 ??50 ? approx.18 g cul, ul recognized spa07420 see page 83 l1 n 21 14 a1 a2 a1 a2 21 14 dc version ac version * free-wheel diode for inductive loads * load 12-275 vac load solid state relay on locking socket plugseries dc version ac version type/version screw connection pos 24vdc/24vdc 2.5a pos 24vdc/230vac 2a pos 24vdc/24vuc 1a pos 24vdc/24vdc 5a pos 24vdc/230vac 4a tension clamp connection poz 24vdc/24vdc 2.5a poz 24vdc/230vac 2a poz 24vdc/24vuc 1a poz 24vdc/24vdc 5a poz 24vdc/230vac 4a type/version screw connection pos 24vac/24vdc 2.5a pos 24vac/24vdc 5a pos 24vac/230vac 4a tension clamp connection poz 24vac/24vdc 2.5a poz 24vac/24vdc 5a poz 24vac/230vac 4a cat. no. 8610840000 8610860000 8610890000 8610900000 8610910000 8610920000 8610930000 8610960000 8610970000 8610980000 cat. no. 8615600000 8615620000 8615590000 8615640000 8615650000 8615630000 digital signal processing 135 accessories ssr / rt compact dimensions (29 x 15.7 x 12.7) combines with plugseries socket pxs / pxz, led indicator pled and prc holding clamp to a complete functioning unit. fully compatible with standard elec- tromechanical relays rt control voltage 24 vac / dc rated switching current 24 vdc, 24 vac/dc, or 230 vac up to 5 a continuous current mounts onto pcb or socket high mounting density possible ordering data technical data input (typical values at 20 ?) input voltage min. ac/dc input voltage max. ac/dc input current min. ac/dc input current max. ac/dc drop-out voltage ac/dc resistancs output max. switching current dc max. switching current ac max. switching current ac/dc min. switching current dc min. switching current ac min. switching current ac/dc rated switching voltage dc rated switching voltage ac rated switching voltage ac/dc switch voltage range dc switch voltage range ac switch voltage range ac/dc max. forward anode voltage at max. switching current dc max. forward anode voltage at max. switching current ac max. forward anode voltage at max. switching current ac/dc max. switch-on time dc max. switch-on time ac (50 hz) max. switch-on time ac/dc (50 hz) max. switch-off time dc max. switch-off time ac (50 hz) max. switch-off time ac/dc (50 hz) insulation test voltage control circuit - switching circuit dc test voltage control circuit - switching circuit ac test voltage control circuit - switching circuit ac/dc further data operating temperature range weight approvals celduc further accessories, dimen- sions and connection data type cat. no. ssr 24 vuc/24vdc 2.5a 8576340000 dc version 15 v 30 v 6.1 ma 12 ma 2.5 v 2.100 ? 2.5 a 1ma 24 v 0...30 v 0.5 v 2 ms 18 ms 2.5 kv eff -40 ??50 ? approx.11 g cul, ul recognized std07205 see page 83 type cat. no. ssr 24 vuc/24vuc 1a 8576380000 ac/dc version 15 v 30 v 6.1 ma 12 ma 2.5 v 2.100 ? 1a 1ma 24 v 0...30 v 0.9 v 5 ms 12 ms 4 kv eff -40 ??50 ? approx.11 g cul, ul recognized stn07105 see page 83 type cat. no. ssr 24 vuc/230vac 2a 8576370000 ac version 15 v 30 v 6.1 ma 12 ma 2.5 v 2.100 ? 2a 50ma 230 v 12...275 v 1 v 12 ms 20 ms 4 kv eff -40 ??50 ? approx.11 g cul, ul recognized sta07220 see page 83 l1 n 21 14 a1 a2 a1 a2 21 14 a1 a2 l1 n 21 14 29 12,7 15,7 5,1 dc version ac version ac/dc version * free-wheel diode for inductive loads * load stn load load solid state relay on locking socket plugseries dimensions 12-275 vac max. 30 vac/dc 5 v 2 ) 12 v 0 10 % 24 v? 10 % 24 v 0 10 % 48 v 0 10 % 115 v 0 , +5%-15% 230 v~, +5%-15% 0.045 w 0.25 w 0.51 w 0.34 w 0.55 w 0.33 w 0.32 va 0.5 va 0.65 va 0.65 va 0.52 va 5?8 v 1 ) 5?8 v 1 ) 5?8 v 1 ) 5?8 v 1 ) 5?8 v 1 ) 5?8 v 1 ) 5?8 v 1 ) < 0.9 v < 1.6 v < 0.9 v < 1.6 v < 1.6 v < 1.5 v < 1.5 v 20 ma 100 ma 20 ma 100 ma 100 ma 100 ma 100 ma 0.2 a/10 ms 0.8 a/10 ms 0.2 a/10 ms 0.8 a/10 ms 0.8 a/10 ms 0.8 a/10 ms 0.8 a/10 ms 0.16 ma 0.16 ma 0.16 ma 0.16 ma 0.16 ma 0.16 ma 0.16 ma 12 ? 6 ms 30 ? 2 ms 5 ms 10 ms 6 ms 15 ? 13 ms 60 ? 15 ms 20 ms 23 ms 18 ms 3 khz 20 hz 3 khz 20 hz < 20 hz 10 hz < 10 hz < 10 hz 1 : 2 10 hz 1 : 2 1 : 2 10 hz 1 : 1 10 hz 1 : 1 10 hz 1 : 1 10 hz 1 : 1 300 v 300 v 300 v 300 v 300 v 300 v 300 v 6 kv 6 kv 6 kv 6 kv 6 kv 6 kv 6 kv iv iv iv iii iv iv iv 2222222 5.5 mm 5.5 mm 5.5 mm 5.5 mm 5.5 mm 5.5 mm 5.5 mm according to according to according to according to according to according to according to din vde 0884 din vde 0884 din vde 0884 din vde 0884 din vde 0884 din vde 0884 din vde 0884 according to according to according to according to according to according to according to din vde 0884 din vde 0884 din vde 0884 din vde 0884 din vde 0884 din vde 0884 din vde 0884 non-destructive non-destructive non-destructive non-destructive non-destructive non-destructive non-destructive test 1 kv test 1 kv test 1 kv test 1 kv test 1 kv test 1 kv test 1 kv acc. to iec 801-4 acc. to iec 801-4 acc. to iec 801-4 acc. to iec 801-4 acc. to iec 801-4 acc. to iec 801-4 acc. to iec 801-4 severity 4 severity 4 severity 4 severity 4 severity 4 severity 4 severity 4 4 kv~ eff 1 min. 4 kv~ eff 1 min. ?0 ??85 ? ?0 ??70 ? ?5 ??60 ? ?5 ??40 ? ?5 ??60 ? ?5 ??45 ? 136 opto-coupler on locking socket profile rs 40 rs 40 rated data input voltage rated consumption ?(w) rated consumption ~ (va) output supply voltage voltage drop at max. load current output current derating curve a = rowed on mounting rail without clearances b = rowed with clearances 20 mm pulse duration, limiting overload current (not periodic) sperrstrom (ruhestrom), max. at u = 48 v switch-on time (cyclic operation) switch-off time (cyclic operation) max. switching frequency dc voltage max. switching frequency ac voltage switching ratio insulation coordination to en 50 178 rated voltage rated impulse voltage overvoltage category pollution severity clearances and creepage distances opto-coupler test voltage (corresponds 100% module test) module is immune to interference insulation voltage input ?output/mounting rail storage temperature ambient temperature ? rowed on mounting rail without clearances ? rowed with clearances 20 mm continuous current ambient temperature 1 ) not ttl-compatible 2 ) conditionally level-compatible 20 or 100 20 or 100 opto-couplers for signal input 137 digital signal processing ordering data connection method input function screw disconnect plug with voltage indicator connection (gse) screw connection (bl/sl) 5 v 2 ) yellow led 1118861001 1161560000 12 v 0 green led 1118761001 1161660000 24 v yellow led 1160961001 1161760000 1177860000 1 ) 24 v 0 yellow led 1117461001 1119460000 green led 8065031001 48 v 0 green led 1161061001 1161860000 115 v 0 green led 1161161001 1161960000 230 v~ green led 1161461001 1162060000 230 v~ red led 8182690000 connection data insulation stripping length 7 mm 6 mm conductor cross-section 0.5?.5 mm 2 0.5?.5 mm 2 awg 26?4 awg 26?6 dimensions mounting width 11.2 mm 11.2 mm length (perpendicular to mounting rail) 70 mm 74 mm height ts/ts 35 x 7.5 56 mm/51.5 mm 56 mm/51.5 mm opto-coupler on locking socket profile rs 40 rs 40 1 ) output 5 vttl-compatible 2 ) conditionally level-compatible 138 20 / 10 ? 19/ 9 + 16 2 2 + 162 164 161 gnd max. 2a +24v 2 2 2 + 22 24 21 gnd max. 2a +24v rsm 16: 1 rsm 8: 1 rsm 4: 1 + 12 14 11 gnd max. 2a +24v 3 3 3 + 32 34 31 gnd max. 2a +24v 4 4 4 + 42 44 41 gnd max. 2a +24v 8 8 + 82 84 81 gnd max. 2a +24v 5 v 1) ?0 % 60 mw 5?8 v 1 ) <1.6 v 0.1 a 0.8 a/10 ms 0.16 ma 100 hz ?0 ??85 ? ?5 ??60 ? ?5 ??60 ? 75 mm 145 mm 285 mm 87 mm 24 v??0 % 400 mw 5?8 v 1 ) <1.6 v 0.1 a 0.8 a/10 ms 0.16 ma 100 hz ?0 ??85 ? ?5 ??60 ? ?5 ??60 ? 75 mm 145 mm 285 mm 87 mm 24 v 0 ?0 % 300 mw 0.35 va 5?8 v 1 ) <1.6 v 0.1 a 0.8 a/10 ms 0.16 ma 20 hz ?0 ??85 ? ?5 ??60 ? ?5 ??60 ? 75 mm 145 mm 285 mm 87 mm 24 v?+10 % 288 mw 24 v ?0 % 0.4 v 2 a 12 a/10 ms 12 ma max. 100 hz ?0 ??60 ? ?5 ??60 ? ?5 ??60 ? 75 mm 145 mm 285 mm 87 mm opto coupler on locking socket with multiple interface rsm rated data input voltage rated consumption ?(w) rated consumption ~ (va) output operating voltage voltage drop at max. load current output current derating curve a = continous operation b = switching mode continuous current ambient temperature pulse duration, limiting overload current (not periodic) max. reverse current (static current), at u switching frequency storage temperature ambient temperature ? rowed on mounting rail without clearances ? rowed with clearances x 20 mm dimensions mounting width rsm 4 rsm 8 rsm 16 length (perpendicular to mounting rail) rsm 4 os 4 opto-couplers rsm 8 os 8 opto-couplers also available as relay coupler, see page 84/85 schematic circuit diagram dc voltage/positive switching (joint negative) opto coupler 24 vdc / 2a standard opto coupler 5?8 vdc / 100 ma 1 ) not ttl-compatible (opto-couplers) note! during operation and maintenance please observe the relevant esd measures. (esd endangered area) ordering data conn. method input rsm 4 os rsm 8 os rsm 16 os positive negative cat. mount. width input/output voltage w /o. optocoupl. 4 optocoupl. w/o. optocoupl. 8 optocoupl. w/o. optocoupl. 16 optocoupl. switching 3 )s witching 4 ) no. (mm) screw/ 1123661001 75 5 v 2 ) 1124061001 145 1124461001 285 8017581001 75 * 1123861001 75 * 1123761001 75 8003671001 145 24 v 8021391001 145 * 1124261001 145 8018221001 285 8082471001 285 * 1124661001 285 * 1125161001 75 24 v 0 * 1125261001 145 connection data insulation stripping length 7 mm conductor cross-section 0.5?.5 mm 2 /awg 26?4 replacement opto-c. type input voltage output voltage output current cat. no. os 5 v 5 ) ?0 % 24 v??0 % 0.1 a 1121100000 os 12 v 5 ) ?0 % 5?8 v 0.1 a 1124800000 os 12 v 0 ?0 % 5?8 v 0.1 a 1121200000 os 24 v 5 ) ?0 % 5?8 v 0.1 a 1124900000 os 24 v 5 ) ?0 % 24 v?+10 % 2.0 a 1170200000 os 24 v 5 ) ?0 % 250 v~ 0.1 a 1153200000 os 24 v 0 ?0 % 5?8 v 0.1 a 1121300000 139 digital signal processing rsm 16 os 16 opto couplers dc/negative switching (common positive) dc/ac voltage opto coupler on locking socket with multiple interface rsm 2 ) 5 v ttl input voltage on request 3 ) common negative potential, positive is switched 4 ) common positive potential, negative is switched 5 ) not suitable for dc/ac version * equipped as standard with opto-coupler 5?8 vdc / 100 ma 140 1 ) the rating data depend on the used module 2 ) on request 3 ) mixed placement of input and output modules is not valid. ordering data rated data (with inpu module) 1) input voltage, max. input current (per channel) max. output voltage output current (per channel), max. rated data (with output module) 1) input voltage, max.: input current (per channel) max. output supply voltage max. output current (per channel) auxilary voltage status indicator fuse storage temperature ambient temperature connection data conductor cross-section screw connection male connect. block din 41651 2 ) ?ub-d?connection 2 ) dimensions mounting width length (perpendicular (to mounting rail) schematic circuit diagram type cat. no. rs 1 hr 1166961001 250 v~ 25 ma 24 v 0 depending on module 24 v 0 depending on module 250 v depending on module 24 v??0 % led red 5x20, 5 a quick ?0 ??70 ? ?5 ??70 ? dependent on semiconductor relay used 0.5?.5 mm 2 35 mm 87 mm type cat. no. rsm 4 hr 1167061001 3) 250 v~ 25 ma 24 v 0 depending on module 24 v 0 depending on module 250 v depending on module 24 v??0 % led red 5x20, 5 a quick ?0 ??70 ? ?5 ??70 ? dependent on semiconductor relay used 0.5?.5 mm 2 130 mm 87 mm type cat. no. rsm 8 hr 1167161001 3) 250 v~ 25 ma 24 v 0 depending on module 24 v 0 depending on module 250 v depending on module 24 v??0 % led red 5x20, 5 a quick ?0 ??70 ? ?5 ??70 ? dependent on semiconductor relay used 0.5?.5 mm 2 10-pole 15-pole 249 mm 87 mm type cat. no. rsm 8 hr-100 1166261001 3) 250 v~ 25 ma 24 v 0 depending on module 24 v 0 depending on module 250 v depending on module 24 v??0 % led red 5x20, 5 a quick ?0 ??70 ? ?5 ??70 ? dependent on semiconductor relay used 0.5?.5 mm 2 10-pole 15-pole 156 mm 109 mm type cat. no. rsm 16 hr-100* 1167261001 3) 250 v~ 25 ma 24 v 0 depending on module 24 v 0 depending on module 250 v depending on module 24 v??0 % led red 5x20, 5 a quick ?0 ??70 ? ?5 ??70 ? dependent on semiconductor relay used 0.5?.5 mm 2 20-pole 25-pole 305 mm 109 mm single and multiple socket interface- unit advantages of semiconductor relays: ?wear-free switching also with high switching frequencies ?bounce-free switching ?no electomagnetic interferences ?high insulation-voltage between load and control circuit note! the relevant esd measures are to be observed during commissioning and maintenance (esd endangered area) rs 1 hr rsm 4 hr rsm 8 hr rsm 8 hr-100 rsm 16 hr-100 opto coupler, locking socket for semi-conductor relays 141 digital signal processing 1) 250 v max. in connection with hr modules. only negative-switching when used on hr-socket! 2) for inductive loads the module must be protected with diode or varistor. schematic circuit diagram type cat. no. hre 24 117440000 10?2 v?(process) 21.33 ma 1.5 k ? 18?2 v (logic) 1 ) 0.4 v 100 ma max. 100 ? 5 ms 5 ms ?0 ??100 ? ?0 ?? 70 ? type cat. no. hre 115 1174500000 90?40 v 0 (process) 10 ma 14 k ? 18?2 v (logic) 1 ) 0.4 v 100 ma max. 100 ? 20 ms 20 ms ?0 ??100 ? ?5 ?? 70 ? type cat. no. hre 230 1174600000 180 v?80 v 0 (process) 6.4 ma 44 k ? 18?2 v (logic) 1 ) 0.4 v 100 ma max. 100 ? 20 ms 20 ms ?0 ??100 ? ?5 ?? 70 ? type cat. no. hra 230 1174100000 18?2 v?(logic) 2.2 k ? 3 v 1 v 24?50 v~ 1 ) 2 ) (process) 3 a 20 ma 6 ma 75 a/20 ms 1/2 period 1/2 period unlimited, t min 100 ? ?0 ??100 ? ?5 ?? 70 ? type cat. no. hra 60 1174300000 18?2 v?(logic) 2.2 k ? 3 v 1 v 5?0 v~ 1 ) 2 ) ( process) 3 a, resistive load 1 ma 5 a/1 s 100 ? 750 ? unlimited, t min 100 ? ?0 ??100 ? ?5 ?? 70 ? semi-conductor relays input module hre 24 dc/dc input module hre 115/hre 230 ac/dc output module hra 230 dc/ac output module hra 60 dc/dc ordering data rated data input voltage input current at max. v input resistance switch-on voltage switch-off voltage max. output operating voltage voltage drop at max. load current max. output current (continous test) derating curve a = self-cooling b = mounted on 2 k/w heat sink continuous current ambient temperature min. load current leakage current in off- condition at rated load voltage surge current switch-on time switch-off time input impulse storage temperature ambient temperature zero v. switch amp. solid state relays for signal input and output 142 timers 143 digital signal processing timers the it product family of electronic delay timers from weidm?ller are the optimum solution for industrial tasks. the product family it offers: response delay (itr) wiping contact without control input (itwo) wiping contact with control input (itww) turn-off delay without control input (itto) turn off delay without control input (ittw) pulse generator (ittt) multifunction (itm) multifunction (itmf) designation of types: i = i ndustry t = t imer r = r esponse delay wo = w iping contact relay with o ut control input ww = w iping contact relay w ith control input to = t urn -off delay with o ut control input tw = t urn-off delay w ith control input tt = t wo t imes m = m ultifunction mf = m ultifunction f our time ranges and supply voltages of delay timer relays product itr itwo, ittt ittw itww itmf, itm itto time 0.1s - 100h 0.06 s - 160 s range 0.1 s - 1 s 1 min - 10 min 1 s - 10 s 0.1 h - 1 h 0.1 min - 1 min 1 h- 10 h 10 h - 100 h 0.06 s - 0.6 s 2 s - 20 s 0.25 s - 2.5 s 16 s - 160 s voltage supply 24 vdc/24?4uvac 24 v - 240 vac 24 vdc the multiple voltage ranges of the supply voltage allow for a wide area of use in industry (see table). the modules?functions for 4 or 7 time can be precisely selected via the rotary button. characteristic data of output contacts limit values by resistive load service life of contacts by resistive load itto itm itr, itp, itwo, itww, ittw,ittt, itmf output of the timing relays the load in every module is switched by a changeover relay (250 v, 8 a). the multifunction module (itm) switches both changeover relays immediately or, one changeover relay immediately and the other changeover relay delayed. switching capacity (kva) switching operations voltage current load load control contact 144 functions of the timers response delay itr timer relay as soon as the operating voltage is applied, the preset delay period t begins. after time period t has expired, output r connects the load. wiping contact timer relay without control input itwo when the operating voltage is applied, output r connects the load immediately. after the preset delay period t has expired, output r disconnects the load. wiping contact timer relay with control input itww as soon as the operating voltage is applied, a pulse (e. g. 50 ms) or a voltage is applied to control input y1. output r connects the load immediately. after the preset delay period t has expired, output r disconnects the load. turn-off delay timer relay without control input itto as soon as the operating voltage is applied, output r connects the load. delay period t does not begin until the operating voltage is switched off. after delay period t has expired, output r disconnects the load. turn-off delay timer relay with control input ittw after the operating voltage has been applied and con- trol input y1 has been activated, output r connects the load for an indefinite period of time. when the control input is opened and after the preset time period t has expired, the output disconnects the load. pulse generator ittt the repeat cycles starts with two individually adjustable times after applying the supply voltage. there is a different starting state for each delay. function a: response delay as soon as the operating voltage is applied, the preset delay period t begins. after time period t has expired, output r connects the load. function ac: response delay and turn-off delay as soon as operating voltage has been applied and control input y1 has closed, delay period t begins. after time period t has expired, output r connects the load (delayed response). when con- trol input y1 is opened, the output dis- connects the load after the preset time period has expired (delayed turn-off). function at: additive response delay as soon as the operating voltage has been applied and delay period t has expired, output r connects the load. at control input y1 the contact break inter- vals are accumulated (additive process). as soon as the operating voltage is switched off, the load at output r is dis- connected. function b: wiping contact with control input as soon as the operating voltage has been applied, a pulse (min 50 ms) or a voltage can be applied to control input y1. output r connects the load immedi- ately. after delay period t has expired, output r disconnects the load. function bw: wiping function the operating voltage must be applied. as soon as a voltage is applied to con- trol input y1, output r connects the load for the prest time t. after time peri- od t has expired, output r disconnects the load. as soon as the control input is opened, output r once more connects the load for the duration of time period t. after time period t has expired, out- put r disconnects the load. function c: turn-off delay with control input as soon as the operating voltage has been applied and control input y1 has been activated, output r connects the load for an indefinite period of time. when the control input is opened and after the preset time period t has expired, the output disconnects the load. function d: pulse generator (begins in the zero position) as soon as the operating voltage has been applied, output r simultaneously switches the load alternately between the zero position and operating position for the period of the preset time t. with this function, the cycle begins at the zero position. function di: pulse generator (begins in the operating position) as soon as the operating voltage has been applied, output r simultaneously switches the load alternately between the zero position and operating position for the period of the preset time t . with this function, the cycle begins at the operating position. function h: wiping contact without control input as soon as the operating voltage is applied, output r connects the load immediately. after delay period t has expired, output r disconnects the load. function ht: wiping contact, additive as soon as the operating voltage is applied, output r connects the load immediately. at control input y1 the contact break intervals are accumulated (additive process) and when the preset delay period has expired, output r dis- connects the load. u = operating voltage r = output relay or load t = delay y1 = control input multifunction itm/itmf 145 digital signal processing timers dimensions it status led two led? show the status of the mod- ules: - green led = supply voltage connected -y ellow led = relay output active (not for itto) marking marking is done on a removable tag or on the marking area. the function is printed on the front of the module. control lamp for verifying contact a control lamp can be wired parallel to input y1 to show the status of control input. assembly mount direct onto din ts 35 mounting rails. approvals and standards this relay has a high resistance to interference. the housing material is self-extinguishing (ul94/v0). manufacturing to iec/vde and ul/csa approvals permit worldwide usage. iec 255 static measuring relays iec529 testers and test procedures iec 664 regulations for high-voltage fuses for motor circuits iec 801 emc compatibility vde 0110 insulation coordination for low-voltage electrical equipment vde 0435 relays with fixed times connection technology clamping yoke has the following capacities: ? x 1.5 mm 2 with ferrule ? x 2.5 mm 2 without ferrule ? x 4 mm 2 without ferrule on din rail on panel using m4 screws 146 ordering data contact time periods repeat accuracy (const. parameter) accuracy of indication acc. to iec 1812-1 input input voltage voltage tolerance duty factor rated power consumption min pulse duration type max. reset time at voltage interruption protection against voltage interruption output contact contact material service life - mechanical - electrical switching current - max. - min. max. switching voltage switching current status indicators voltage applied relay output active approvals standards temperature - storage temperature - operating temperature clearance/creepage path. acc. to iec 664/vde 0110 protection category iec 529 - terminal block - front mounting installation category to iec 664 connection - with ferrule - without ferrule enclosure material weight, typ. schematic circuit diagram type cat. no. itm 8362550000 changeover 0.1 s - 100 h 1 s, 10 s, 1 min 1 h, 10 h, 100 h 0.5% 10% (25 ?) 12 v?40 vac/dc / 50...60 hz 85 - 110% u n 100 % 7 va / 230 v~ 50 ms 100 ms > 10 ms relay output 2 changeover agcdo 5x10 6 switching operations 10 5 switching operations at 2000 va resistive load 8 a 0 / changeover contact 100 ma 0 250 v 0 2000 va / 80 w green led yellow led ul / csa iec 529 / iec 664 / iec 801 / iec 255 vde 0435/ vde 0110 ?0?...+70? ?0?...+60? 4 kv ip 20 ip 50 din rail 35 mm category iii 2 x 1.5 mm 2 2 x 2.5 mm 2 / 1 x 4 mm 2 self extinguishing 110 g multifunctional timers response delay response delay and turn-off delay additive response delay wiping contact with control input wiping function turn-off delay with control input pulse generator (begins in the zero position) pulse generator (begins in the operating position) wiping contact without control input wiping contact, additive itm multifunctional timer relay function a: response delay as soon as the operating voltage is applied, the preset delay period t begins. after time period t has expired, output r connects the load. function ac: response delay and turn-off delay as soon as operating voltage has been applied and control input y1 has closed, delay period t begins. after time period t has expired, output r connects the load (delayed response). when con- trol input y1 is opened, the output dis- connects the load after the preset time period has expired (delayed turn-off). function at: additive response delay as soon as the operating voltage has been applied and delay period t has expired, output r connects the load. at control input y1 the contact break inter- vals are accumulated (additive process). as soon as the operating voltage is switched off, the load at output r is dis- connected. function b: wiping contact with control input as soon as the operating voltage has been applied, a pulse (min 50 ms) or a voltage can be applied to control input y1. output r connects the load immedi- ately. after delay period t has expired, output r disconnects the load. function bw: wiping function the operating voltage must be applied. as soon as a voltage is applied to con- trol input y1, output r connects the load for the prest time t. after time peri- od t has expired, output r disconnects the load. as soon as the control input is opened, output r once more connects the load for the duration of time period t. after time period t has expired, out- put r disconnects the load. function c: turn-off delay with control input as soon as the operating voltage has been applied and control input y1 has been activated, output r connects the load for an indefinite period of time. when the control input is opened and after the preset time period t has expired, the output disconnects the load. function d: pulse generator (begins in the zero position) as soon as the operating voltage has been applied, output r simultaneously switches the load alternately between the zero position and operating position for the period of the preset time t. with this function, the cycle begins at the zero position. function di: pulse generator (begins in the operating position) as soon as the operating voltage has been applied, output r simultaneously switches the load alternately between the zero position and operating position for the period of the preset time t . with this function, the cycle begins at the operating position. function h: wiping contact without control input as soon as the operating voltage is applied, output r connects the load immediately. after delay period t has expired, output r disconnects the load. function ht: wiping contact, additive as soon as the operating voltage is applied, output r connects the load immediately. at control input y1 the contact break intervals are accumulated (additive process) and when the preset delay period has expired, output r dis- connects the load. u = operating voltage r = output relay or load t = delay y1 = control input 147 digital signal processing schematic circuit diagram type cat. no. itto 8362600000 changeover 0.6 s -160 s (0.06 s - 0.6 s, 0,25 s - 2.5 s, 2 s - 20 s, 16 s - 160 s) 0.5% 10% (25 ?) 24 vdc/ 24?40 vac / 50...60 hz 85 - 110% u n 100 % 0.5 w / 30 va / 230 v~ _ 50 ms 100 ms > 10 ms relay output 2 changeover agcdo 5x10 6 switching operations 10 5 switching operations at 1250 va resistive load 8 a 0 / changeover contact 100 ma 0 250 v 0 1250 va / 80 w green led ul / csa iec 529 / iec 664 / iec 801 / iec 255 vde 0435/ vde 0110 ?0?...+70? ?0?...+60? 4 kv / 2 ip 20 ip 50 din rail 35 mm category iii 2x 1.5 mm 2 2x 2.5 mm 2 / 1x4 mm 2 self extinguishing 100 g type cat. no. ittw 8362610000 changeover 0.1 s -100 h (0.1 s - 1 s, 1 s -10 s, 0.1 min - 1 min, 1 min - 10 min, 0.1 h - 1 h, 1 h - 10h) 0.5% 10% (25 ?) 24 vdc/ 24?40 vac / 50...60 hz 85 - 115% u n (110% for 240 v) 100 % 0.5 w / 24 v- / 1 w / 48 v- / 2 va / 48 v~ 1.5 va / 24 v~ 12 va / 230 v~ 50 ms 100 ms > 10 ms relay output 1 changeover agcdo 5x10 6 switching operations 10 5 switching operations at 2000 va resistive load 8 a 0 100 ma 0 250 v 0 2000 va / 80 w green led yellow led ul / csa iec 529 / iec 664 / iec 801 / iec 255 vde 0435/ vde 0110 ?0?...+70? ?0?...+60? 4 kv / 2 ip 20 ip 50 din rail 35 mm category iii 2x 1.5 mm 2 2x 2.5 mm 2 / 1x4 mm 2 self extinguishing 100 g timers ordering data contact time periods repeat accuracy (const. parameter) anzeigegenauigkeit gem??iec 1812-1 input input voltage voltage tolerance duty factor rated power consumption min. switch-on time for the supply min pulse duration type max. reset time at voltage interruption protection against voltage interruption output contact contact material service life - mechanical - electrical switching current - max. - min. max. switching voltage switching current status indicators voltage applied relay output active approvals standards temperature - storage temperature - operating temperature clearance/creepage path. acc. to iec 664/vde 0110 protection category iec 529 - terminal block - front mounting installation category to iec 664 connection - with ferrule - without ferrule enclosure material weight, typ. itto turn-off delay timer relay without control input ittw turn-off delay timer relay with control input 148 type cat. no. itwo 8362580000 changeover 0.1 s - 100 h (0.1 - 1 s, 1 s - 10 s, 0.1 min. - 1 min., 1 min. - 10 min., 0.1 h - 1 h, 1 h - 10 h, 100 h) 0.5% 10% (25 ?) 24 vdc/ 24?40 vac / 50...60 hz 85 - 115% u n (110% for 240 v) 100 % 0.5 w / 24 v- 1.5 va / 24 v~ 12 va / 230 v~ 50 ms 100 ms > 10 ms relay output 1 changeover agcdo 5x10 6 switching operations 10 5 switching operations at 2000 va resistive load 8 a 0 100 ma 0 250 v 0 2000 va / 80 w green led yellow led ul / csa iec 529 / iec 664 / iec 801 / iec 255 vde 0435/ vde 0110 ?0?...+70? ?0?...+60? 4 kv / 2 ip 20 ip 50 din rail 35 mm category iii 2x 1.5 mm 2 2x 2.5 mm 2 / 1x4 mm 2 self extinguishing 100 g type cat. no. itww 8362590000 changeover 0.1 s - 100 h (0.1 - 1 s, 1 s - 10 s, 0.1 min. - 1 min., 1 min. - 10 min., 0.1 h - 1 h, 1 h - 10 h, 100 h) 0.5% 10% (25 ?) 24 vdc/ 24?40 vac / 50...60 hz 85 - 115% u n (110% for 240 v) 100 % 0.5 w / 24 v- / 1 w / 48 v- / 2 va / 48 v~ 1.5 va / 24 v~ 12 va / 230 v~ 50 ms 100 ms > 10 ms relay output 1 changeover agcdo 5x10 6 switching operations 10 5 switching operations at 2000 va resistive load 8 a 0 100 ma 0 250 v 0 2000 va / 80 w green led yellow led ul / csa iec 529 / iec 664 / iec 801 / iec 255 vde 0435/ vde 0110 ?0?...+70? ?0?...+60? 4 kv / 2 ip 20 ip 50 din rail 35 mm category iii 2x 1.5 mm 2 2x 2.5 mm 2 / 1x4 mm 2 self extinguishing 100 g schematic circuit diagram timers itwo wiping contact timer relay without control input ordering data contact time periods repeat accuracy (const. parameter) accuracy of indication acc. to iec 1812-1 input input voltage voltage tolerance duty factor rated power consumption min pulse duration type max. reset time at voltage interruption protection against voltage interruption output contact contact material service life - mechanical - electrical switching current - max. - min. max. switching voltage switching current status indicators voltage applied relay output active approvals standards temperature - storage temperature - operating temperature clearance/creepage path. acc. to iec 664/vde 0110 protection category iec 529 - terminal block - front mounting installation category to iec 664 connection - with ferrule - without ferrule enclosure material weight, typ. itww wiping contact timer relay with control input 149 digital signal processing schematic circuit diagram type cat. no. ittt 8324050000 changeover 0.1 s - 100 h (0.1 - 1 s, 1 s - 10 s, 0.1 min. - 1 min., 1 min. - 10 min., 0.1 h - 1 h, 1 h - 10 h, 100 h) 0.5% 10% (25 ?) 24 vdc/ 24?40 vac / 50...60 hz 85 - 115% u n (110% for 240 v) 100 % 0.5 w / 24 v- 1.5 va / 24 v~ 12 va / 230 v~ 50 ms 100 ms > 10 ms relay output 1 changeover agcdo 5x10 6 switching operations 10 5 switching operations at 2000 va resistive load 8 a 0 100 ma 0 250 v 0 2000 va / 80 w green led yellow led ul / csa iec 529 / iec 664 / iec 801 / iec 255 vde 0435/ vde 0110 ?0?...+70? ?0?...+60? 4 kv / 2 ip 20 ip 50 din rail 35 mm category iii 2x 1.5 mm 2 2x 2.5 mm 2 / 1x4 mm 2 self extinguishing 100 g type cat. no. itmf 8287770000 changeover 0.1 s - 100 h (0.1 - 1 s, 1 s - 10 s, 0.1 min. - 1 min., 1 min. - 10 min., 0.1 h - 1 h, 1 h - 10 h, 100 h) 0.5% 10% (25 ?) 24 vdc/ 24?40 vac / 50...60 hz 85 - 115% u n (110% for 240 v) 100 % 0.5 w / 24 v- / 1 w / 48 v- 1.5 va / 24 v~ / 2 va / 48 v~ 12 va / 230 v~ 50 ms 100 ms > 10 ms relay output 1 changeover agcdo 5x10 6 switching operations 10 5 switching operations at 2000 va resistive load 8 a 0 100 ma 0 250 v 0 2000 va / 80 w green led yellow led ul / csa iec 529 / iec 664 / iec 801 / iec 255 vde 0435/ vde 0110 ?0?...+70? ?0?...+60? 4 kv / 2 ip 20 ip 50 din rail 35 mm category iii 2x 1.5 mm 2 2x 2.5 mm 2 / 1x4 mm 2 self extinguishing 100 g timers ittt pulse generator itmf multifunction - timer relay ordering data contact time periods repeat accuracy (const. parameter) accuracy of indication acc. to iec 1812-1 input input voltage voltage tolerance duty factor rated power consumption min pulse duration type max. reset time at voltage interruption protection against voltage interruption output contact contact material service life - mechanical - electrical switching current - max. - min. max. switching voltage switching current status indicators voltage applied relay output active approvals standards temperature - storage temperature - operating temperature clearance/creepage path. acc. to iec 664/vde 0110 protection category iec 529 - terminal block - front mounting installation category to iec 664 connection - with ferrule - without ferrule enclosure material weight, typ. 150 schematic circuit diagram type cat. no. itr 8362570000 changeover 0.1 s - 100 h (0.1 - 1 s, 1 s - 10 s, 0.1 min. - 1 min., 1 min. - 10 min., 0.1 h - 1 h, 1 h - 10 h, 100 h) 0.5% 10% (25 ?) 24 vdc/ 24?40 vac / 50...60 hz 85 - 115% u n (110% for 240 v) 100 % 0.5 w / 24 v- 1.5 va / 24 v~ 12 va / 230 v~ 50 ms 100 ms > 10 ms relay output 1 changeover agcdo 5x10 6 switching operations 10 5 switching operations at 2000 va resistive load 8 a 0 100 ma 0 250 v 0 2000 va / 80 w green led yellow led ul / csa iec 529 / iec 664 / iec 801 / iec 255 vde 0435/ vde 0110 ?0?...+70? ?0?...+60? 4 kv / 2 ip 20 ip 50 din rail 35 mm category iii 2x 1.5 mm 2 2x 2.5 mm 2 / 1x4 mm 2 self extinguishing 100 g timers itr response delay timer relay ordering data contact time periods repeat accuracy (const. parameter) accuracy of indication acc. to iec 1812-1 input input voltage voltage tolerance duty factor rated power consumption min pulse duration type max. reset time at voltage interruption protection against voltage interruption output contact contact material service life - mechanical - electrical switching current - max. - min. max. switching voltage switching current status indicators voltage applied relay output active approvals standards temperature - storage temperature - operating temperature clearance/creepage path. acc. to iec 664/vde 0110 protection category iec 529 - terminal block - front mounting installation category to iec 664 connection - with ferrule - without ferrule enclosure material weight, typ. 151 digital signal processing schematic circuit diagram type cat. no. dkz 24 vac/dc 32 8008130000 dkz 24 vac/dc 35 8008190000 24 vac/dc 10 % 5.1 madc/6.1 maac ?0 % 130 mw ?0 % / 150 mva ?0 % 1s 0.7 ms 5?8 vdc 20 ma 0,16 ma (at 48 v) 1 v 0.9 hz 300 v 4 kv iii 2 4 mm 4 kv eff -25 ??50 ? -25 ??50 ? -40 ??85 ? 6 mm awg 22?2 0.5? mm 2 ja type cat. no. ap dkt4 0687560000 page 305 type cat. no. dkza 24 vdc 32 8008120000 dkza 24 vdc 35 8008180000 24 vdc 18 % 6.7 ma 10 % 200 ma 10 % 160 mw 10 % 50 ms 2 ms 5?8 vdc 20 ma 0,16 ma (at 48 v) 1.6 v 20 hz 300 v 4 kv iii 2 4 mm 4 kv eff -25 ??50 ? -25 ??50 ? -40 ??85 ? 6 mm awg 22?2 0.5? mm 2 ja type cat. no. ap dkt4 0687560000 page 305 type cat. no. dkza 24 vdc 32 8020990000 dkza 24 vdc 35 8022110000 24 vdc 10 % 6.7 ma 10 % 200 ma 10 % 160 mw 150 ms 2.5 ms 5?8 vdc 20 ma 0,16 ma (at 48 v) 1.6 v 20 hz 300 v 4 kv iii 2 4 mm 4 kv eff -25 ??50 ? -25 ??50 ? -40 ??85 ? 6 mm awg 22?2 0.5? mm 2 ja type cat. no. ap dkt4 0687560000 page 305 ordering data for ts 32 y for ts 35 w technical data input input voltage input nominal current input current (at first-time power-up) input power switch-on delay switch-off delay min. pulse duration of input voltage output max. output voltage max. output voltage reverse current, max. (closed-circuit current) max. voltage drop at max. load current max. switching frequency isolation coordinates acc. to din vde 0160, draft11/94 rated voltage rated impulse voltage overvoltage category pollution severity clearance and creepage distances voltage proof, input/output-ts operating temperature without clearances with clearances storage temperature total width conductor conductor cross-section reverse polarity protection accessories end plate dimensions see timers dkz 24 vac/dc dkza 24 vac/dc dkza 24 vac/dc components for extending short pulses provides plc versions with switch-on/off delay ? ixed times dkz dkza signal conditioning dkz/dkza timer modules 152 ordering data for ts 32 for ts 35 with combi foot ts32/ts 35 technical data input supply voltage supply current control voltage control input current output output voltage max. output current internal voltage drop range of switch-on delay isolation coordinates acc. to din vde 0160, draft11/94 rated voltage rated impulse voltage overvoltage category pollution severity clearance and creepage distances voltage proof, input/output-ts operating temperature without clearances with clearances storage temperature total width conductor conductor cross-section accessories end plate dimensions see type cat. no. dkz dk5 8228680000 24 vdc 20 % ca. 12 ma 5?8 vdc 100 ma 1.6 v 10?00 ms (adjustable) 300 v 6 kv iv 2 5.5 mm 4 kv eff -25 ??40 ? -25 ??50 ? -40 ??85 ? 6 mm awg 22?2 0.5? mm 2 type cat. no. ap dk5 8268870000 page 305 type cat. no. dkz dk5 8243780000 24 vdc 20 % ca. 12 ma 5?8 vdc 100 ma 1.6 v 100 ms? s (adjustable) 300 v 6 kv iv 2 5.5 mm 4 kv eff -25 ??40 ? -25 ??50 ? -40 ??85 ? 6 mm awg 22?2 0.5? mm 2 type cat. no. ap dk5 8268870000 page 305 type cat. no. dkz dk5 8019650000 24 vdc 20 % ca. 12 ma 5?8 vdc 100 ma 1.6 v 1?00 s (adjustable) 300 v 6 kv iv 2 5.5 mm 4 kv eff -25 ??40 ? -25 ??50 ? -40 ??85 ? 6 mm awg 22?2 0.5? mm 2 type cat. no. ap dk5 8268870000 page 305 dkz dk5 dkz dk5 dkz dk5 pulse conditioning dkz/dkza timer modules dkz dkza timers schematic circuit diagram 153 digital signal processing ordering data for ts 32 for ts 35 with combi foot ts 32/ts 35 technical data input: supply voltage supply current control voltage control input curren min. pulse duration of input voltage output: output voltage max. output current internal voltage drop range of switch-off delay isolation coordinates acc. to din vde 0160, draft11/94 rated voltage rated impulse voltage overvoltage category pollution severity clearance and creepage distances voltage proof input/output-ts storage temperature operating temperature without clearances with clearances total width conductor conductor cross-section accessories end plate dimensions see type cat. no. dkza dk5 8243770000 24 vdc 20 % ca. 11 ma 24 vdc 20 % ca. 0.5 ma 2 ms 5?8 vdc 100 ma 1.6 v 100 ms?s (adjustable) 300 v 4 kv eff iv 2 5.5 mm 6 kv -40?85 ? -25?40 ? -25?50 ? 6 mm awg 22?2 0.5? mm 2 type cat. no. ap dk5 8268870000 page 305 type cat. no. dkza dk5 8019630000 24 vdc 20 % ca. 11 ma 24 vdc 20 % ca. 0.5 ma 2 ms 5?8 vdc 100 ma 1.6 v 1?00 s (adjustable) 300 v 4 kv eff iv 2 5.5 mm 6 kv -40?85 ? -25?40 ? -25?50 ? 6 mm awg 22?2 0.5? mm 2 type cat. no. ap dk5 8268870000 page 305 signal conditioning dkza timer modules components for extending short pulses provides plc versions with switch-on/off delay ? ixed times dkza dk5 dka dk5 type cat. no. dkza dk5 8228690000 24 vdc 20 % ca. 11 ma 24 vdc 20 % ca. 0.5 ma 2 ms 5?8 vdc 100 ma 1.6 v 10?00 ms (adjustable) 300 v 6 kv iv 2 5.5 mm 4 kv eff -25 ??40 ? -25 ??50 ? -40 ??85 ? 6 mm awg 22?2 0.5? mm 2 type cat. no. ap dk5 8268870000 page 305 dkza dk5 timers schematic circuit diagram 154 ordering data for ts 35 technical data input input voltage min. pulse duration power consupmtion input power power consumption when pulse applied output output voltage max. output current max. voltage drop at max. load impulse loading/limiting overload current reverse current at 48 v (static current) switch-off delay switching frequency dc insulation coordination/safe disconnection to en 50178 rated voltage rated impulse voltage overvoltage category pollution severity clearance and creepage distances voltage proof, input/output mounting rail opto coupler ambient temperature storage temperature conductor conductor cross-section approvals total width schematic circuit diagram turn off delay module mcz to mcz to 24 vdc turn-off delay 50 ms mcz to 24 vdc turn-off delay 150 ms type cat. no. mcz to 24 vdc turn-off delay 50 ms 8324590000 24 vdc 10 % 2 ms 6.7 ma 10 % 160 mw 200 ma 5?8 vdc 20 ma 1.6 v 200 ma max. 0,16 ma 50 ms 20 hz 300 v 6 kv iii 2 5.5 mm 4 kv eff / 1 min to vde 0884 -25 ??50 ? -40 ??85 ? awg 22?2 1.5 mm 2 ce, ul, csa 6 mm type cat. no. mcz to 24 vdc turn-off delay 150 ms 8286410000 24 vdc 10 % 2.5 ms 6.7 ma 10 % 160 mw 200 ma 5?8 vdc 20 ma 1.6 v 200 ma max. 0,16 ma 150 ms 5 hz 300 v 6 kv iii 2 5.5 mm 4 kveff / 1 min to vde 0884 -25 ??50 ? -40 ??85 ? awg 22?2 1.5 mm 2 ce, ul, csa 6 mm the timer module can be used for extending short pulses and fixed times. provides plc ver- sions with switch off delay. t v = var timers 155 digital signal processing |
Price & Availability of 0536260000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |